FR601G THRU FR607G 6.0 AMPS. Glass Passivated Fast Recovery Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes R-6 Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STD202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Mounting position: Any Weight: 1.65 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol FR FR Type Number 601G 602G Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC FR FR FR FR FR Units 603G 604G 605G 606G 607G 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 55℃ I(AV) 6.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 250 A Maximum Instantaneous Forward Voltage @ 6.0A VF 1.3 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 200 uA uA nS pF 150 Typical Junction Capacitance ( Note 2 ) Trr Cj Typical Thermal Resistance ( Note 3 ) RθJA Maximum Reverse Recovery Time ( Note 1 ) Operating Temperature Range Storage Temperature Range TJ TSTG 250 65 30 -65 to +150 -65 to +150 Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. - 450 - 500 O C/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (FR601G THRU FR607G) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 600 8 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT AMPERES FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 6 4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 2 500 400 8.3ms Single Half Sine Wave JEDEC Method 300 200 100 0 0 0 25 50 75 100 125 150 1 175 10 o 50 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C) FIG.3- TYPICAL FORWARD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE 1000 700 600 500 400 100 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 500 40 10 Tj=25oC Pulse Width=300 s 1% Duty Cycle 300 200 100 1 60 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 40 2.0 1 2 FORWARD VOLTAGE. (V) 4 6 10 20 40 REVERSE VOLTAGE. (V) FIG.5- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE trr +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms - 451 - -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm 60 100 100