Ribbon Cable Connector HIF4 Series ■Features 1. Current Capacity The HIF4 series connector is capable of 3 A current capacity used for wider applications, while the HIF3 series uses 1 A capacity. 2. Full Lock Mechanism This connector is equipped with a Hirose original locking mechanism, and guarantees excellent reliability for vibration and shock. 3. One-touch Insertion and Extraction Mechanism This connector is equipped with levers for automatic insertion and extraction, as soon as lock is reset. Insertion and extraction tools are not required. 4. Applicable Cable The applicable cable is UL2651 AWG#24 flat cable (7 cores./0.203mm, jacket dia :1.0 to 1.2mm). ■Applications Computers, terminal equipment, various kinds of electronic equipment, and office automation machines ■Product Specifications Current rating : 3A Rating Operating Temperature Range : –55 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2) Storage Humidity Range : 40 to 70% (Note 2) Voltage rating : 300V AC Operating Moisture Range : 40 to 80% Item Specification 1. Insulation Resistance 1000M ohms min Condition 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute 3. Contact Resistance 15m ohms max 0.1A 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle No damage, cracks, or parts looseness. 7. Operating Life Contact resistance: 15m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance. 96 hours at temperature of 40ç and humidity of 90% to 95% (-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Material Contact B2 Part Material Finish Remarks Insulator PBT Black UL94V-0 Socket Beryllium copper gold plated Pin header Phosphor bronze gold plated ––––––– ■Ordering Information ●Pin Header HIF4 - * P - 3.18 DS q w e q Series Name r t : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e P : Pin header r Contact Pitch : 3.18mm t Contact Type DS : Right angle type SA : Straight dip type W : Wrapping type ●Socket HIF4 - * D - 3.18 R q w e q Series Name r t : HIF4 w Number of Contacts : 16, 20, 26, 34, 40 e Contact alignment : D : Double r Contact Pitch : 3.18mm t Connection type : Ribbon cable B3 ■Socket Unit:mm Part Number CL No. Number of Contacts A B C HIF4-16D-3.18R 563-0025-5 16 31.98 22.26 26.28 HIF4-20D-3.18R 563-0010-8 20 38.34 28.62 32.64 HIF4-26D-3.18R 563-0011-0 26 47.88 38.16 42.18 HIF4-34D-3.18R 563-0012-3 34 60.60 50.88 54.90 HIF4-40D-3.18R 563-0029-6 40 70.14 60.42 64.44 ■Pin Header Right Angle Type Unit:mm B4 Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18DS 563-0026-8 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18DS 563-0001-7 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18DS 563-0002-0 26 62.58 48.08 38.16 55.88 49.48 HIF4-34P-3.18DS 563-0003-2 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18DS 563-0030-5 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.89 101.44 78.14 71.74 ■Pin Header Straight Through hole Type Unit:mm Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18DSA 563-0027-0 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18DSA 563-0004-5 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18DSA 563-0005-8 26 62.58 48.08 38.16 55.88 49.48 HIF4-34P-3.18DSA 563-0006-0 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18DSA 563-0031-8 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 78.14 71.74 ■Pin Header Wrapping Type Unit:mm Part Number CL No. Number of Contacts A B C D E F HIF4-16P-3.18W 563-0028-3 16 46.68 32.18 22.26 39.98 33.58 HIF4-20P-3.18W 563-0007-3 20 53.04 38.54 28.62 46.34 39.94 HIF4-26P-3.18W 563-0008-6 26 62.58 48.04 38.16 55.88 49.48 HIF4-34P-3.18W 563-0009-9 34 75.30 60.80 50.88 68.60 62.20 HIF4-40P-3.18W 563-0032-0 40 84.84 70.34 60.42 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 78.14 71.74 B5 BPCB mounting pattern ●Pin Header Right Angle Type Number of Contacts A B 16 22.26 33.58 20 28.62 39.94 26 38.16 49.48 34 50.88 62.20 40 60.42 71.74 Number of Contacts A B 16 22.26 39.98 20 28.62 46.34 26 38.16 55.88 34 50.88 68.60 40 60.42 78.14 ●Pin Header Straight Through hole Type or Pin Header Wrapping Type ●Type Shape DS type DSA type B6 W type BHIF4 Basic Connection Method As shown below in Figure 1, contact positions are indicated by marks (K●◆◆). Fig.1 The connected contact is indicated with a symbol next to the individual type name. However, the contact symbol connected to the cable mark is indicated at the mark *. Type AB Type A side Type B side * K mark and K mark K mark and ● mark M ■ Type AO Type BO Type AD M ■ A side D side * K mark and K mark K mark and ● mark Type CO Type CD M ■ C side D side * K mark and K mark K mark and ● mark Type DO B7 Contact positions are designated with marks as shown below. According to the illustration on the left, the illustration 1 indicates these positions on the right. Note 1: Cable length tolerance 500 +10, 0 max. (mm) 500 +3%, 0% min. Note 2.When a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. If connection failure has occurred, consult HRS Sales Department. Type AC M M A side C side * K mark and K mark K mark and K mark Type CC M M C side C side * K mark and K mark K mark and K mark Type AA B8 M M A side A side * K mark and K mark K mark and K mark