Murata HPR1009C 1.0 watt unregulated, sip dc/dc converter Datasheet

HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
FEATURES
DESCRIPTION
N
ROHS COMPLIANT
N
LOW COST
N
SINGLE-IN-LINE PACKAGE (SIP)
N
INTERNAL INPUT AND OUTPUT FILTERING
N
NON-CONDUCTIVE CASE
N
HIGH OUTPUT POWER DENSITY: 13 WATTS/INCH3
N
EXTENDED TEMPERATURE RANGE:
-25°C TO +65°C
N
HIGH EFFICIENCY: TO 72% (TYPICAL)
The HPR10XXC Series uses advanced circuit design and
packaging technology to deliver superior reliability and
performance. A 170kHz push-pull oscillator is used in the
input stage. Beat-frequency oscillation problems are reduced
when using the HPR10XXC Series with high frequency
isolation amplifiers.
Reduced parts count and high efficiency add to the reliability of the HPR10XXC Series. The high efficiency of the
HPR10XXC Series means less internal power dissipation, as
low as 190mW. With reduced heat dissipation the HPR10XXC
Series can operate at higher temperatures with no degradation.
In addition, the high efficiency of the HPR10XXC Series
means the series is able to offer greater than 13 W/inch3 of
output power density. Operation down to no load will not
impact the reliability of the series, although a 1mA minimum
load is needed to realize published specifications.
The HPR10XXC Series provides the user low cost without
sacrificing reliability. The use of surface mounted devices
and advanced manufacturing technologies make it possible
to offer premium performance and low cost.
MECHANICAL
FRONT
VIEW
Notes: All dimensions are in inches (millimeters).
RIGHT
SIDE
VIEW
HPR10XXC
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
MATERIAL: Lead material is phosphor bronze; finish is
100-300 micro-inches of matte tin over a barrier layer of
5-40 micro-inches of nickel.
PIN CONNECTIONS
BOTTOM
VIEW
1. +VIN
2. -VIN
4. -VOUT 5. COM*
6. +VOUT
* Common pin not present on
single output models.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: [email protected], tel: +1 508 339 3000
TDC_HPR10XXC.C00 Page 1 of 4
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
ELECTRICAL SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
NOMINAL
INPUT
VOLTAGE
RATED
OUTPUT
VOLTAGE
RATED
OUTPUT
CURRENT
MODEL
INPUT CURRENT
NO LOAD
RATED LOAD
REFLECTED
RIPPLE
CURRENT
(mA)
(mAp-p)
EFFICIENCY
(VDC)
(VDC)
(mA)
(mA)
HPR1000C
HPR1001C
HPR1002C
HPR1003C
HPR1004C
5
5
5
5
5
5
12
15
±5
±12
200
83
67
±100
±42
33
33
33
33
33
290
290
285
285
285
8
8
8
8
8
68
69
70
70
70
HPR1005C
HPR1006C
HPR1007C
HPR1008C
HPR1009C
5
12
12
12
12
±15
5
12
15
±5
±34
200
83
67
±100
33
18
18
18
18
285
110
107
107
107
8
10
10
10
10
70
70
71
71
71
HPR1010C
HPR1011C
HPR1012C
HPR1013C
HPR1014C
12
12
15
15
15
±12
±15
5
12
15
±42
±34
200
83
67
18
18
15
15
15
107
107
96
94
94
10
10
10
10
10
71
71
70
70
71
HPR1015C
HPR1016C
HPR1017C
HPR1018C
HPR1019C
15
15
24
24
±12
±15
5
12
±42
±34
200
83
15
15
12
12
94
94
60
60
10
10
15
15
71
71
71
71
HPR1020C
HPR1021C
HPR1022C
HPR1023C
24
24
24
24
15
±5
±12
±15
67
±100
±42
±34
12
12
12
12
58
58
58
58
15
15
15
15
72
72
72
72
(%)
Note: Other input to output voltages may be available. Please contact factory.
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER
INPUT
Voltage Range
Voltage Rise Time
ISOLATION
Rated Voltage
Test Voltage
Resistance
Capacitance
Leakage Current
OUTPUT
Rated Power
Voltage Setpoint Accuracy
Ripple & Noise
Voltage
Temperature Coefficent
REGULATION
Line Regulation
Load Regulation (5V out only)
Load Regulation (All other Models)
GENERAL
Switching Frequency
Frequency Change
Package Weight
MTTF per MIL-HDBK-217, Rev. E
Ground Benign
Fixed Ground
Naval Sheltered
Airborne Uninhabited Fighter
Moisture Sensitivity Level (MSL)
CONDITIONS
MIN
TYP
MAX
UNITS
4.5
5
5.5
VDC
10.8
12
13.2
VDC
13.5
15
16.5
VDC
21.6
24
26.4
VDC
See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters"
60 Hz, 10 Seconds
1000
1000
10
25
2
VISO= 240VAC, 60Hz
100
8.5
1.0
VDC
Vpk
GΩ
pF
μArms
.01
W
%
mVp-p
mVrms
VDC
VDC
VDC
%/Deg C
High Line to Low Line
Rated Load to 1mA Load
Rated Load to 1mA Load
1
10
3
%/%Vin
%
%
Over Line and Load
170
24
2
kHz
%
g
3.8
1.4
685
211
2
MHr
MHr
kHr
kHr
Rated Load, Nominal VIN
BW = DC to 10MHz
BW =10Hz to 2MHz
1mA Load, VOUT = 5V
1mA Load, VOUT = 12V
1mA Load, VOUT = 15V
±5
100
30
7
15
18
Circuit Stress Method
TA = +25°C
TA = +35°C
TA = +35°C
TA = +35°C
IPC/JEDEC J-STD-20
TEMPERATURE
Specification
Storage
-25
-50
+25
+65
+110
°C
°C
* For demonstrated MTTF results reference Reliability Report HPR105
www.murata-ps.com
Technical enquiries email: [email protected], tel: +1 508 339 3000
TDC_HPR10XXC.C00 Page 2 of 4
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
TYPICAL PERFORMANCE CURVES
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
VOUT VS LOAD
(5Vout Models)
VOUT VS LOAD
(±5Vout Models)
5.7
5.4
5.5
5.2
VOUT VS LOAD
(12Vout Models)
12.5
5.3
12.3
Vout
Vout
Vout
12.4
5.0
12.2
12.1
5.1
4.8
4.9
4.6
12.0
0
80
40
120
160
11.9
0
Output Current (mA)
20
40
60
0
80
Output Current each load (mA)
VOUT VS LOAD
(±12Vout Models)
VOUT VS LOAD
(15Vout Models)
12.6
40
60
80
VOUT VS LOAD
(±15Vout Models)
16.5
15.9
12.5
16.0
15.7
12.4
15.5
12.3
15.5
Vout
Vout
Vout
20
Output Current each load (mA)
15.0
12.2
15.3
14.5
12.1
15.1
14.0
12.0
14.9
0
10
20
30
13.5
0
40
20
40
60
Output Current each load (mA)
Output Current each load (mA)
EFFICIENCY VS LOAD
OSCILLATION FREQUENCY VS
TEMPERATURE
90
80
0
0.2
0.4
0.6
0.8
1.0
Output Power each load (Watts)
220
Efficiency (%)
Efficiency (%)
75
60
45
30
200
180
160
15
0
0
20
40
60
% of Rated Load (%)
140
80
100
-30
0
30
60
90
Temperature (°C)
THROUGH-HOLE SOLDERING INFORMATION
These devices are intended for wave soldering or manual soldering.
They are not intended to be subject to surface mount processes under any circumstances.
The normal wave soldering process can be used with these devices where the device is subjected
to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this
time and temperature range, the integrity of the device’s plastic body will not be compromised and
internal temperatures within the converter will not exceed 175°C. Care should be taken to control
manual soldering limits identical to that of wave soldering.
www.murata-ps.com
Technical enquiries email: [email protected], tel: +1 508 339 3000
TDC_HPR10XXC.C00 Page 3 of 4
HPR10XXC
1.0 WATT UNREGULATED, SIP DC/DC CONVERTER
SAFE OPERATING AREA
LOAD CAPACITANCE vs INPUT RISE TIME
(5 Vout models)
600
50
Total Load Capacitance (uF)
Total Load Capacitance (uF)
500
400
300
SAFE OPERATING AREA
200
40
30
SAFE OPERATING AREA
20
10
100
0
0
0
5
10
15
20
25
30
35
Rise Time of Input Voltage (mS)
40
45
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
NOTES:
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
1. When operated within the SAFE OPERATING AREA as defined
by the above curves, the output voltage of Hpr10xxC devices is
guaranteed to be within 95% of its steady-state value within 100
milliseconds after the input voltage has reached 95% of its steadystate value.
80
70
60
50
SAFE OPERATING AREA
40
0
50
90
Total Load Capacitance (uF)
LOAD CAPACITANCE vs INPUT RISE TIME
(15 Vout models)
60
30
2. For dual output models, total load capacitance is the sum of the
capacitances on the plus and minus outputs.
20
10
0
0
5
10
15
20
25
30
35
40
45
50
Rise Time of Input Voltage (mS)
ORDERING INFORMATION
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation.....................................................490mW
Short Circuit Duration......................................................Momentary
HPR 10XX C
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
RoHS Compliance
USA:
Mansfield (MA), Tel: (508) 339-3000, email: [email protected]
Canada: Toronto, Tel: (866) 740-1232, email: [email protected]
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
UK:
Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected]
France:
Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected]
Germany: München, Tel: +49 (0)89-544334-0, email: [email protected]
www.murata-ps.com email: [email protected] ISO 9001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2008 Murata Power Solutions, Inc.
Japan:
Tokyo, Tel: 3-3779-1031, email: [email protected]
Osaka, Tel: 6-6354-2025, email: [email protected]
Website: www.murata-ps.jp
China:
Shanghai, Tel: +86 215 027 3678, email: [email protected]
Guangzhou, Tel: +86 208 221 8066, email: [email protected]
05/02/08
www.murata-ps.com
Technical enquiries email: [email protected], tel: +1 508 339 3000
TDC_HPR10XXC.C00 Page 4 of 4
Similar pages