FAIRCHILD NC7WZ32

Revised June 2003
NC7WZ32
TinyLogic UHS Dual 2-Input OR Gate
General Description
Features
The NC7WZ32 is a dual 2-Input OR Gate from Fairchild’s
Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. The device is specified to operate over the 1.65V to
5.5V VCC range. The inputs and output are high impedance
when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage.
■ Space saving US8 surface mount package
■ MicroPak leadless package
■ Ultra high speed tPD 2.4 ns Typ into 50 pF at 5V VCC
■ High output drive ±24 mA at 3V VCC
■ Broad VCC operating range 1.65V to 5.5V
■ Matches the performance of LCX when operated at
3.3V VCC
■ Power down high impedance inputs/output
■ Overvoltage tolerant inputs facilitate 5V to 3V translation
■ Patented noise/EMI reduction circuitry implemented
Ordering Code:
Product
Order
Package
Code
Number
Number
Top Mark
NC7WZ32K8X
MAB08A
WZ32
NC7WZ32L8X
MAC08A
N5
Package Description
Supplied As
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel
8-Lead MicroPak, 1.6 mm Wide
Logic Symbol
5k Units on Tape and Reel
Connection Diagrams
IEEE/IEC
Pin Descriptions
(Top View)
Pin Names
Description
An , Bn
Inputs
Yn
Output
Function Table
AAA represents Product Code Top Mark - see ordering code
Note: Orientation of Top Mark determines Pin One location. Read the top
product code mark left to right, Pin One is the lower left pin (see diagram).
Y=A+B
Input
A
Output
B
Pad Assignments for MicroPak
Y
L
L
L
L
H
H
H
L
H
H
H
H
H = HIGH Logic Level
Pin One Orientation Diagram
L = LOW Logic Level
(Top Thru View)
TinyLogic is a registered trademark of Fairchild Semiconductor Corporation.
MIcroPak is a trademark of Fairchild Semiconductor Corporation.
© 2003 Fairchild Semiconductor Corporation
DS500270
www.fairchildsemi.com
NC7WZ32 TinyLogic UHS Dual 2-Input OR Gate
April 2000
NC7WZ32
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
Supply Voltage (VCC)
−0.5Vto +7V
DC Input Voltage (VIN)
−0.5V to +7V
Supply Voltage Operating (VCC)
1.65V to 5.5
DC Output Voltage (VOUT)
−0.5V to +7V
Supply Voltage Data Retention (VCC)
1.5V to 5.5V
DC Input Diode Current (IIK)
Input Voltage (VIN)
@VIN < −0.5V
−50 mA
0V to 5.5V
Output Voltage (VOUT)
DC Output Diode Current (IOK)
0V to VCC
−40°C to +85°C
Operating Temperature (TA)
@VOUT< −0.5V
−50 mA
Input Rise and Fall Time (tr, tf)
±50 mA
VCC = 1.80V ± 0.15V, 2.5V ± 0.2V
0 ns/V to 20 ns/V
±100 mA
VCC = 3.3V ± 0.3V
0 ns/V to 10 ns/V
−65°C to +150°C
VCC = 5.0V ± 0.5V
0 ns/V to 5 ns/V
DC Output Current (IOUT)
DC VCC/GND Current (ICC/IGND)
Storage Temperature (TSTG)
150°C
Junction Temperature under Bias (TJ)
Thermal Resistance (θJA)
250°C/W
Junction Lead Temperature (TL);
260°C
Soldering, 10 seconds
Power Dissipation (PD) @ +85°C
250 mW
Note 1: Absolute Maximum Ratings are DC values beyond which the
device may be damaged or have its useful life impaired. The datasheet
specifications should be met, without exception, to ensure that the system
design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet
specifications.
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol
VIH
Parameter
HIGH Level Input Voltage
(V)
VOH
VOL
LOW Level Input Voltage
HIGH Level Output Voltage
LOW Level Output Voltage
IIN
Input Leakage Current
IOFF
Power Off Leakage Current
ICC
Quiescent Supply Current
www.fairchildsemi.com
Min
Typ
TA = −40°C to +85°C
Max
1.65 to 1.95 0.75 VCC
2.3 to 5.5
VIL
TA = +25°C
VCC
Min
Max
0.75 VCC
1.65 to 1.95
0.25 VCC
0.25 VCC
2.3 to 5.5
0.3 VCC
0.3 VCC
1.65
1.55
1.65
1.55
2.3
2.2
2.3
2.2
3.0
2.9
3.0
2.9
4.5
4.4
4.5
4.4
1.65
1.29
1.52
1.29
2.3
1.9
2.15
1.9
3.0
2.4
2.80
2.4
3.0
2.3
2.68
2.3
4.5
3.8
4.20
3.8
Conditions
V
0.7 VCC
0.7 VCC
Units
V
V
VIN = VIH IOH = –100 µA
IOH = −4 mA
IOH = −8 mA
V
IOH = −16 mA
IOH = −24 mA
IOH = −32 mA
1.65
0.0
0.1
0.1
2.3
0.0
0.1
0.1
3.0
0.0
0.1
0.1
V
VIN = VIL IOL = 100 µA
4.5
0.0
0.1
0.1
1.65
0.08
0.24
0.24
IOL = 4 mA
2.3
0.10
0.3
0.3
IOL = 8 mA
3.0
0.15
0.4
0.4
3.0
0.22
0.55
0.55
4.5
0.22
0.55
0.55
±0.1
±1
µA
VIN = 5.5V, GND
0 to 5.5
V
IOL = 16 mA
IOL = 24 mA
IOL = 32 mA
0.0
1
10
µA
VIN or VOUT = 5.5V
1.65 to 5.5
1
10
µA
VIN = 5.5V, GND
2
Symbol
tPLH,
Parameter
Propagation Delay
tPHL
tPLH,
Propagation Delay
tPHL
TA = +25°C
VCC
(V)
Min
TA = −40°C to +85°C
Typ
Max
Min
Max
1.8 ± 0.15
2.0
5.8
10.5
2.0
11.0
2.5 ± 0.2
1.0
3.5
5.8
1.0
6.2
3.3 ± 0.3
0.8
2.6
3.9
0.8
4.3
5.0 ± 0.5
0.5
1.8
3.1
0.5
3.3
3.3 ± 0.3
1.2
3.2
4.8
1.2
5.2
5.0 ± 0.5
0.8
2.4
3.7
0.8
4.0
CIN
Input Capacitance
0
2.5
CPD
Power Dissipation
3.3
14
Capacitance
5.0
18
Units
ns
ns
Conditions
CL = 15 pF,
RL = 1MΩ
CL = 50 pF,
Figure
Number
Figures
1, 3
RL = 500Ω
Figures
1, 3
(Note 3)
Figure 2
pF
pF
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression:
ICCD = (C PD) (VCC) (fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and stray capacitance.
Input PRR = 1.0 MHz, tw = 500 ns.
FIGURE 1. AC Test Circuit
FIGURE 3. AC Waveforms
Input = AC Waveforms; tr = tf = 1.8 ns;
PRR = 10 MHz; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
3
www.fairchildsemi.com
NC7WZ32
AC Electrical Characteristics
NC7WZ32
Tape and Reel Specification
TAPE FORMAT for US8
Package
Designator
Tape
Number
Cavity
Section
Cavities
Status
Status
125 (typ)
Empty
Sealed
3000
Filled
Sealed
75 (typ)
Empty
Sealed
Cover Tape
Leader (Start End)
K8X
Carrier
Trailer (Hub End)
Cover Tape
TAPE DIMENSIONS inches (millimeters)
TAPE FORMAT for MicroPak
Package
Designator
Tape
Number
Cavity
Section
Cavities
Status
Status
125 (typ)
Empty
Sealed
3000
Filled
Sealed
75 (typ)
Empty
Sealed
Leader (Start End)
L8X
Carrier
Trailer (Hub End)
TAPE DIMENSIONS inches (millimeters)
www.fairchildsemi.com
4
NC7WZ32
Tape and Reel Specification
(Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
5
www.fairchildsemi.com
NC7WZ32
Physical Dimensions inches (millimeters) unless otherwise noted
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
Package Number MAB08A
www.fairchildsemi.com
6
NC7WZ32 TinyLogic UHS Dual 2-Input OR Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
8-Lead MicroPak, 1.6 mm Wide
Package Number MAC08A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com