PC Card Socket Connector Complies with PC card Standard IC1 Series ■Features 1. Compliant with PC Card Standards Polarized entry prevents wrong insertion into a corresponding connector. And sequential contact engagement prevents electorostatic discharge,avoiding possible damage to sensitive board circuits. 2. Suited to Automatic Mounting Packaged for a board placement with aoutmated equipment. 3. Lead Offset Available with several board termination levels,to allow use of different height board components. In relation to the center line of connector,0.2mm,+0.3mm,+0.55mm,+0.9mm and terminations on board center are available. ■Product Specifications Current rating 0.5 A Ratings Voltage rating 125 V AC Item Operating temperature -55ç to +85ç (Note 1) Operating humidity 95% R.H. max. (No condensation) Storage temperature -40ç to +70ç (Note 2) Storage humidity 40% to 70% (Note 2) Specification Conditions 1. Insulation resistance 1000M ohms min. 500 V DC 2. Withstanding voltage No flashover or insulation breakdown. 500 V AC / 1 minute 3. Contact resistance 40 m ohms max. (initial value) (Note 3) 1 mA 4. Vibration No electrical discontinuity of 100ns or more Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature cycle No damage, cracks, or parts looseness. -55ç, 30 min /15 to 30ç, within 5 min/85ç, 30 min /15 to 35ç, within 5 min, for 5 cycles 7. Durability (Insertion/withdrawal) Change of contact resistance from the start should be 20 m ohms max. 10000 cycles at 400 to 600 cycles per hour 8. Resistance to soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. ■Materials A52 Part Material Finish Remarks Insulator PPS Color : Black UL94V-0 Contact IC1K,IC1HA:Phosphor bronze Others:Beryllium copper Contact Area : gold plating Lead Area : solder plating ----------------- ■Ordering Information IC1 F - * R D - 1.27 SH 1 2 3 4 5 6 7 1 Series name : IC1 2 BB: Compliant with PC Card Standards Connector thickness: 2.8mm F: Compliant with PC Card Standards Connector thickness: 2.7mm HA: Compliant with PC Card Standards Connector thickness: 2.7mm Lead offset type K: Compliant with PC Card Standards Connector thickness: 2.7mm Suited to automatic mounting 3 Contacts: 40, 68 4 R: Card Connector 5 D: 2-row arrangement 6 Contact pitch: 1.27mm 7 Mounting method SH: Two sided board terminations SHA: Two sided board terminations SF: Single surface mount type. SFA: Single surface mount type. SFB: Single surface mount type. ■68 Contacts Card Connectors ●Connector thickness : 2.7mm ●Lead offset type ●Suited to automatic mounting ●Single surface mount type IC1K-68RD-1.27SFA CL640-0047-2 BPCB mounting pattern Unit:mm Part Number CL No. A B C IC1K-68RD-1.27SF 640-0046-0 2 0.3 5 IC1K-68RD-1.27SFA 640-0047-2 2 0.9 5 IC1K-68RD-1.27SFB 640-0048-5 3 ------- 6 A53 ■68 Contacts Connector ●Connector thickness:2.7mm ●Single surface mount type Compliant with PC Card Standard IC1F-68RD-1.27SF CL640-0035-3 Unit:mm Part Number A IC1F-68RD-1.27SF 640-0035-3 0.3 IC1F-68RD-1.27SFA 640-0040-3 0.854 ■68 Contacts Connector ●Connector thickness:2.7mm ●Two sided board termination on the center line Compliant with PC Card Standard IC1F-68RD-1.27SH CL640-0013-0 • Recommended board thickness : 0.4 to 0.5mm A54 CL No. ■68 Contacts Connector ●Connector thickness:2.8mm ●Two sided board termination on the center line Compliant with PC Card Standard IC1BB-68RD-1.27SH CL640-0036-6 • Recommended board thickness : 0.4 to 0.5mm ■68 Contacts Connector ●Connector thickness:2.7mm ●Two sided board terminations ●Two Mounting levels of board terminations Compliant with PC Card Standard IC1HA-68RD-1.27SH CL640-0044-4 • Recommended board thickness : 0.4 to 0.5mm 1 For 0.45mm board thickness Part Number CL No. IC1HA-68RD-1.27SH 640-0044-4 IC1HA-68RD-1.27SHA 640-0045-7 A55