EPCOS B25620D1407K101 Film capacitors â power electronic capacitor Datasheet

Film Capacitors – Power Electronic Capacitors
MKP DC
Series/Type:
Ordering code:
B2562*
Date:
Version:
January 2013
8
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
Film Capacitors – Power Electronic Capacitors
Identification/Classification 2
(header 2 + bottom left header bar):
MKP DC
Ordering code: (top right header bar)
B2562*
Series/Type: (bottom right header bar)
Preliminary data (optional):
(if necessary)
Department:
FILM R&D / FILM P PM
Date:
January 2013
Version:
8
 EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
Construction and general data
Characteristics
Standard capacitance tolerance
Dielectric dissipation factor (tan δo)
Θstg
Expected lifetime tLD (co)
Fit rate
Minimum temperature Θmin.
Maximum temperature Θmax.
Storage temperature Θstg
Maximum hotspot temperature Θhs
(refer to section 1)
Climatic category
Maximum altitude
Test data
Voltage between terminals VTT
Voltage between terminals and case VTC
Dissipation factor tan δ (100 Hz)
Life test
Cooling
Degree of protection
Design data
Impregnation
Mounting and grounding
Max. torque (case) M12 stud
Max. torque terminal
K: ±10%
2 • 10-4
–55 ... +85 °C
100 000 h at Θhs +75°C (refer to section 1)
200 (refer to section 2)
–55 °C
+ 70 °C (refer to section 2)
–55 ... +85 °C
+85 ºC for diameter 85 and 90 mm
+75 °C for diameter 116 mm
55/70/56
2000 m above sea level
(derating curves available upon request)
1.5
VDC , 10s
4000 VAC, 10s
≤ 1.0 • 10-3
According to IEC 61071
Naturally air-cooled (or forced air cooling)
Indoor mounting
Resin filling: Non PCB, hard polyurethane (dry type)
M12 threaded bolt on bottom of the aluminum case
10 Nm
Female M6: 5 Nm
Female M8: 6 Nm
Male M8: 8 Nm
Reference standards
IEC 61071
RoHS compliance
Certification: UL 810-5th edition (refer to table 1.3)
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 2 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
1.1 Structure of ordering code
Version:
B = standard
C = standard with plastic cap
D = heavy duty with plastic cap
S = special
MKP DC Series
Rated voltage: 110 • 10 = 1100 V
B2562 0 B 1 427 K 10 1
Terminal type:
0 = Female M6
1 = Male M6
2 = Female M8
3 = Male M8
4 = Female M10
5 = Male M10
9 = special
Rated capacitance:
7
107 = 10 · 10 pF = 100 µF
427 = 42 · 107 pF = 420 µF
8
108 = 10 · 10 pF = 1 mF
Distance between terminals:
1 = 32 mm
2 = 35 mm
3 = 50 mm
4 = 45 mm
9 = special
Capacitance tolerance
J = ± 5%
K = ± 10%
A = special
1.2 Standard types:
D (mm)
OC ending
Diameter (Ø)
Terminal type
85 mm
90 mm
116 mm
Female M6
(B25620)
32 ± 0.5
-**1
45 ± 0.5
-**4
50 ± 0.5
-**3
standard
Male M8
(B25623)
standard
Female M6
(B25620)
available
Female M6
(B25620)
standard
Other terminal configurations available upon request.
1.3 UL approved types:
Diameter (Ø)
85 mm
90 mm
116 mm
Series
B2562xC
B2562xD
all types
all types
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 3 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
1.4 Drawings types:
Figure 1: - B25620B - Ø 85mm
- Female terminals (M6)
- Between terminals 32±0.5mm
Figure 2: - B25620C / B25620D - Ø 85mm
- Female terminals (M6)
- Between terminals 32±0.5mm
Ø 12
Ø 85 ± 0.5
Ø 85 ± 0.5
32 ± 0.5
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 4 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
Figure 3 : - B25620B - Ø 90mm
- Male terminals (M8)
- Between terminals 45±0.5mm
B2562*
Figure 4: - B25620B - Ø 116mm
- Female terminals (M6)
- Between terminals 50±0.5mm
Ø 116 ± 0.5
50 ± 0.5
Ø 90 ± 0.5
45 ± 0.5
M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types.
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 5 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
Terms and characteristics
The following definitions apply to power capacitors according to IEC 61071.
Rated capacitance CN
Nominal value of the capacitance at 20 °C and measuring frequency range of 50 to 120 Hz.
Rated DC voltage VRDC
Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which the capacitor
has been designed, for continuous operation.
Ripple voltage Vr
Peak-to-peak alternating component of the unidirectional voltage.
Maximum surge voltage Vs
Peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited
number of times and duration.
- Maximum duration: 50 ms / pulse
- Maximum number of occurrences: 1000 (during load)
Insulation voltage Vi
Rms rated value of the insulation voltage of capacitive elements and terminals to case or earth. When it is not
specified in the product data sheet, the insulation voltage is at least:
Vi =
VR
2
Maximum rate of voltage rise (dV/dt)max
Maximum permissible repetitive rate of voltage rise of the operational voltage.
Maximum current Imax
Maximum rms current for continuous operation.
Maximum peak current Î
Maximum permissible repetitive current amplitude during continuous operation.
Maximum peak current (Î) and maximum rate of voltage rise (dV/dt)max on a capacitor are related as follows:
Î = C · (dV/dt)max
Maximum surge current Î s
Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a
limited number of times (1000 times) and duration (50 ms / pulse).
Îs = C · (dV/dt)s
Ambient temperature ΘA
Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the capacitor.
Lowest operating temperature Θmin
Lowest permitted ambient temperature at which a capacitor may be energized.
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 6 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
Maximum operating temperature Θmax
Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the case.
Hot-spot temperature Θhs / Ths
Temperature zone inside of the capacitor at hottest spot.
Tangent of the loss angle of a capacitor tan δ
Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a specified
sinusoidal alternating voltage, frequency and temperature.
Series resistance Rs
The sum of all Ohmic resistances occurring inside the capacitor.
ESR
ESR (Equivalent Series Resistance) representing entire active power in capacitor.
ESR =
tan δ
tan δ 0
= Rs +
ω ⋅C
ω ⋅C
Thermal resistance Rth
The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot rises in relation
to the dissipation losses.
Maximum power loss Pmax
Maximum permissible power dissipation for the capacitor’s operation.
Pmax =
Θhs − Θ A
R th
Self inductance Lself
The sum of all inductive elements which are contained in a capacitor.
Resonance frequency fr
The lowest frequency at which the impedance of the capacitor becomes minimum.
fr =
1
2π ⋅ L self ⋅ C R
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 7 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
VR = 700 V DC / VTT = 1050 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
280
500
560
620
700
780
900
1240
1400
IMAX 1
A
55
60
80
55
55
65
80
80
80
Is
kA
12.1
13.5
24.2
12.1
12.1
13.4
24.3
24.3
24.1
Î
kA
4.0
4.5
8.0
4.0
4.0
4.5
8.0
8.1
8.0
RS
mΩ
1.2
1.4
0.9
1.9
2.0
1.9
1.1
1.3
1.4
Lself
nH
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
RTH
K/W
5.4
3.7
4.0
3.1
2.8
2.7
2.9
2.3
2.1
D
mm
85
90
116
85
85
90
116
116
116
H
mm
70
95
70
120
132
132
95
120
132
Weight
kg
0.45
0.73
0.88
0.71
0.87
1.00
1.13
1.40
1.55
Fig.
H
mm
70
73
95
98
95
70
120
123
132
135
120
132
95
145
173
176
173
120
132
173
Weight
kg
0.45
0.48
0.58
0.61
0.73
0.88
0.71
0.74
0.87
0.9
0.9
1
1.13
1.2
1.1
1.13
1.3
1.4
1.55
1.945
Fig.
1
3
4
1
1
3
4
4
4
Ordering code
B25620B0287K701
B25623B0507K704
B25620B0567K703
B25620B0627K701
B25620B0707K701
B25623B0787K703
B25620B0907K703
B25620B0128K743
B25620B0148K703
VR = 900 V DC / VTT = 1350V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
220
220
350
350
420
440
480
480
550
550
580
650
700
730
750
750
830
970
1100
1500
1
IMAX 1
A
50
50
50
50
60
65
55
55
50
50
62
62
70
62
55
55
58
75
75
80
Is
kA
10.8
10.8
10.7
10.7
11.9
21.7
10.8
10.8
11
11
11.9
11.8
21.5
11.8
23.1
23.1
23.5
21.7
21.7
43
Î
kA
3.6
3.6
3.6
3.6
4.0
7.2
3.6
3.6
3.7
3.7
4.0
3.9
7.1
3.9
7.7
7.7
7.8
7.2
7.2
15.4
RS
mΩ
1.3
1.3
1.7
1.7
1.5
1.1
2.8
2.1
2.3
2.3
1.9
2.1
1.2
2.2
1.2
1.2
0.7
1.4
1.6
1.1
Lself
nH
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 60
≤ 60
≤ 60
≤ 60
≤ 40
≤ 40
≤ 60
RTH
K/W
5.4
5.4
3.9
3.9
3.7
3.8
3.1
3.1
2.8
2.8
3.0
2.7
2.9
2.4
2.2
2.2
2.1
2.3
2.1
1.6
D
mm
85
85
85
85
90
116
85
85
85
85
90
90
116
90
85
85
90
116
116
116
1
2
1
2
3
4
1
2
1
2
3
3
4
3
1
2
3
4
4
4
Ordering code
B25620B0227K881
B25620C0227K881
B25620B0357K881
B25620C0357K881
B25623B0427K904
B25620B0447K883
B25620B0487K881
B25620C0487K881
B25620B0557K881
B25620C0557K881
B25623B0587K904
B25623B0657K904
B25620B0707K883
B25623B0737K904
B25620B0757K881
B25620C0757K881
B25623B0837K904
B25620B0977K883
B25620B0118K883
B25620B0158K883
IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 8 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
VR = 1100 V DC / VTT = 1650 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
140
140
220
270
280
310
310
370
400
400
400
420
420
420
420
450
450
470
480
480
530
610
610
700
700
940
1100
1500
IMAX 1
A
50
50
54
55
75
50
50
56
63
63
75
63
63
75
56
75
80
56
80
80
53
80
80
80
80
80
80
80
Is
kA
8.6
8.6
9.5
9.6
17.2
8.6
8.6
9.5
8.8
8.8
17.3
8.8
8.8
17.3
9.5
16.5
17.3
9.5
17.3
17.3
18.8
16.8
17
16.8
27
32.7
30.8
32.5
Î
kA
2.9
2.9
3.2
3.2
5.7
2.9
2.9
3.2
2.9
2.9
5.8
2.9
2.9
5.8
3.2
5.4
5.8
3.2
5.8
5.8
6.3
5.6
5.7
5.6
8.9
11
10.3
10.8
RS
mΩ
1.4
1.4
1.5
1.7
1.0
2.3
2.3
2.2
2.4
2.4
1.5
2.4
2.4
1.5
2.4
1.3
1.0
2.6
1.0
1.0
0.8
3.13
1.1
1.7
1.1
0.7
0.8
0.9
Lself
nH
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 60
≤ 40
≤ 60
≤ 60
≤ 60
≤ 40
≤ 60
≤ 40
≤ 60
≤ 60
≤ 100
≤ 90
RTH
K/W
5.4
5.4
4.3
3.7
4
3.1
3.1
3.0
2.8
2.8
2.2
2.8
2.8
2.2
2.7
2.9
2.2
2.4
2.2
2.2
2.1
2.3
1.7
2.1
1.7
1.6
1.3
1
D
mm
85
85
90
90
116
85
85
90
85
85
85
85
85
85
90
116
85
90
85
85
90
116
85
116
116
116
116
116
H
mm
70
73
83
95
70
120
123
120
132
135
151
135
138
151
132
95
176
145
173
176
173
120
226
132
176
173
223
295
Weight
kg
0.45
0.48
0.53
0.73
0.9
0.71
0.73
0.9
0.87
0.9
1
0.87
0.9
1
1
1.13
1.05
1.2
1.05
1.08
1.3
1.4
2.2
1.55
2.05
2.06
2.56
2.8
Fig.
1
2
3
3
4
1
2
3
1
2
2
1
2
2
3
4
2
3
1
2
3
4
2
4
4
4
4
4
Ordering code
B25620B1147K101
B25620C1147K101
B25623B1227K104
B25623B1277K104
B25620B1287K103
B25620B1317K101
B25620C1317K101
B25623B1377K104
B25620B1407K101
B25620C1407K101
B25620D1407K101
B25620B1427A101*
B25620C1427A101*
B25620D1427K101
B25623B1427K104
B25620B1457K103
B25620D1457K101
B25623B1477K104
B25620B1487K101
B25620C1487K101
B25623B1537K104
B25620B1617K103
B25620D1617K101
B25620B1707K103
B25620D1707K103
B25620B1947K103
B25620B1118K103
B25620B1158K103
* Capacitance tolerance A: -15% ... 0%
1
IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 9 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
VR = 1200 V DC / VTT = 1800 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
220
300
340
360
440
500
550
570
730
1000
IMAX 1
A
50
50
50
70
52
75
80
75
80
80
Is
kA
8.6
8.5
8.5
15.223
17.1
15.379
16.917
15.429
30.869
30.758
Î
kA
2.9
2.8
2.8
5.074
5.7
5.126
5.639
5.143
10.29
10.253
RS
mΩ
1.9
2.4
2.6
1.341
0.8
1.614
0.987
1.751
0.69
0.807
Lself
nH
≤ 40
≤ 40
≤ 40
≤ 40
≤ 60
≤ 40
≤ 90
≤ 40
≤ 60
≤ 90
RTH
K/W
3.7
3.0
2.7
2.9
2.1
2.29
1.59
2.07
1.59
1.23
D
mm
90
90
90
116
90
116
90
116
116
116
H
mm
95
120
132
95
173
120
223
133
173
223
Weight
kg
0.73
0.9
1
1.13
1.3
1.4
1.4
1.55
2.05
2.56
Fig.
H
mm
95
120
123
120
132
135
132
95
145
173
176
173
120
132
173
273
Weight
kg
0.73
0.71
0.73
0.9
0.87
0.9
1
1.13
1.2
1.05
1.08
1.3
1.4
1.55
2.05
2.8
Fig.
3
3
3
4
3
4
3
4
4
4
Ordering code
B25623B1227K204
B25623B1307K204
B25623B1347K204
B25620B1367K203
B25623B1447K204
B25620B1507K203
B25623B1557K204
B25620B1577K203
B25620B1737K203
B25620B1108K203
VR = 1320 V DC / VTT = 1980 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
190
220
220
250
260
260
290
310
330
340
340
370
420
480
660
1000
IMAX 1
A
51
45
45
51
45
45
52
65
52
70
70
50
65
70
70
80
Is
kA
8.1
7.4
7.4
7.7
7.6
7.6
7.9
14.3
7.9
14.8
14.8
15.7
14.1
14.1
27.8
26.4
Î
kA
2.7
2.5
2.5
2.6
2.6
2.6
2.6
4.8
2.6
5
5
5.2
4.7
4.7
9.3
8.8
RS
mΩ
1.9
2.6
2.6
2.5
2.7
2.7
2.7
1.4
3.0
0.9
0.9
0.8
1.7
1.8
0.8
1
Lself
nH
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 40
≤ 60
≤ 60
≤ 60
≤ 60
≤ 40
≤ 40
≤ 90
≤ 90
RTH
K/W
3.7
3.1
3.1
3.0
2.8
2.8
2.7
2.9
2.4
1.6
1.6
2.1
2.3
2.1
1.6
1
D
mm
90
85
85
90
85
85
90
116
90
85
85
90
116
116
116
116
Ordering code
3
B25623B1197K304
1
2
3
1
2
3
4
3
1
2
3
4
4
4
4
B25620B1227K321
B25620C1227K321
B25623B1257K304
B25620B1267K321
B25620C1267K321
B25623B1297K304
B25620B1317K323
B25623B1337K304
B25620B1347K321
B25620C1347K321
B25623B0377K304
B25620B1427K323
B25620B1487K323
B25620B1667K323
B25620B1108K323
1
IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 10 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
VR = 1980 V DC / VTT = 2970 V DC, 10s / VTC = 4000 V AC, 10s
CR
µF
40
40
70
70
145
145
190
215
295
460
IMAX 1
A
35
35
40
40
50
50
60
60
70
80
Is
kA
4.5
4.5
4.9
4.9
10
10
18.9
9.6
18.8
18.2
Î
kA
1.5
1.5
1.6
1.6
3.4
3.4
6.3
3.2
6.3
6
RS
mΩ
2.1
2.1
2.8
2.8
1.1
1.1
0.7
2.4
0.8
1.1
Lself
nH
≤ 60
≤ 60
≤ 60
≤ 60
≤ 60
≤ 60
≤ 60
≤ 40
≤ 60
≤ 90
RTH
K/W
5.4
5.4
4
4
2.2
2.2
2.3
2.1
1.6
1
D
mm
85
85
85
85
85
85
116
116
116
116
H
mm
70
73
95
98
173
176
120
132
173
263
Weight
kg
0.45
0.48
0.58
0.61
1.05
1.08
1.4
1.55
2.05
2.6
Fig.
1
2
1
2
1
2
4
4
4
4
Ordering Code
B25620B1406K981
B25620C1406K981
B25620B1706K981
B25620C1706K981
B25620B1147K981
B25620C1147K981
B25620B1197K983
B25620B1217K983
B25620B1297K983
B25620B1467K983
1
IMAX at Θ 40°C, refer to “current derating” section for more details
Other configurations and capacitance tolerances available upon request
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 11 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
2. Expected lifetime
Expected Lifetim e @ t L D
70°C
75°C
80°C
V/Vn
1,1
1,05
1
0,95
0,9
0,5
0,7
0,9
1,1
t L D /t L D ( c o )
1,3
1,5
Expected lifetime tld at different hotspot temperature (Θhs) and voltage V
For short term operation (maximum 10% of the total expected lifetime) and capacitors with diameter 85 and
90 mm a maximum hot spot temperature of 85°C is allowed without further reduction of the lifetime.
3. Current derating
3.1 Current derating graphs for capacitors 700 V DC
B25620B0287K701
B25620B0627K701
Current Derating @ Ths = 75 °C
55
50
45
40
35
30
25
20
40
45
50
55
T e m p. ( °C )
60
65
70
B25620B0707K701
40
45
50
40
45
50
55
T e m p. ( °C )
60
65
70
B25620B0567K703
Current Derating @ Ths = 75 °C
60
55
50
45
40
35
30
25
20
Current Derating @ Ths = 75 °C
60
55
50
45
40
35
30
25
20
55
T e m p. ( °C )
60
65
Current Derating @ Ths = 75 °C
80
70
60
50
40
30
70
40
45
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
50
55
T e m p. ( °C )
60
65
70
January 2013 – Version 8
Page 12 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B25620B0907K703
B25620B0128K743
Current Derating @ Ths = 75 °C
80
70
60
50
40
30
40
45
50
55
T e m p. ( °C )
60
65
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40
35
70
B25620B0148K703
80
75
70
65
60
55
50
45
40
35
B2562*
40
45
50
55
T e m p. ( °C )
60
65
70
B25620B0507K704
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
Current Derating @ Ths = 75 °C
60
55
50
45
40
35
30
25
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
B25620B0787K704
65
Current Derating @ Ths = 75 °C
55
45
35
25
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
3.2 Current derating graphs for capacitors 1100 V DC
B25620B1147K101
B25620B1287K103
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 13 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B25620B1317K101
B25620B1407K101/B25620B1427A101
Current Derating @ Ths = 75 °C
65
60
55
50
45
40
35
30
40
B25620D1427K101
80
75
70
65
60
55
50
45
40
35
30
B25620B1457K103
80
75
70
65
60
55
50
45
40
35
30
40 43 46 49 52 55 58 61 64 67 70
B25620B1617K103
Current Derating @ Ths = 75 °C
T e m p. ( °C )
B25620D1617K101
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40
35
70
60
50
40
30
50
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
45
70
B25620B1487K101
Current Derating @ Ths = 75 °C
40
60
T e m p. ( °C )
T e m p. ( °C )
80
Temp. (°C)
40 43 46 49 52 55 58 61 64 67 70
40 43 46 49 52 55 58 61 64 67 70
75
70
65
60
55
50
45
40
35
30
50
B25620D1457K101
Current Derating @ Ths = 75 °C
75
70
65
60
55
50
45
40
35
30
B2562*
55
60
T e m p. ( °C )
65
70
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 14 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B25620B1707K103
B25620D1707K103
Current Derating @ Ths = 75 °C
80
60
50
40
30
45
50
55
60
T e m p. ( °C )
65
40 43 46 49 52 55 58 61 64 67 70
70
B25620B1947K103
T e m p. ( °C )
B25620B1118K103
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
T e m p. ( °C )
B25620B1158K103
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40 43 46 49 52 55 58 61 64 67 70
B25620B1227K104
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40
70
40
B2562*
Current Derating @ Ths = 75 °C
55
50
45
40
35
40 43 46 49 52 55 58 61 64 67 70
40
T e m p. ( °C )
B25620B1277K104
55
50
45
40
35
30
25
20
45
50
T e m p. ( °C )
55
60
B25620B1377K104
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
55
50
45
40
35
30
25
20
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 15 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B25620B1427K104
55
50
45
40
35
30
25
20
Current Derating @ Ths = 75 °C
B2562*
B25620B1477K104
Current Derating @ Ths = 75 °C
55
50
45
40
35
30
25
20
40 43 46 49 52 55 58 61 64 67 70
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
T e m p. ( °C )
B25620B1537K104
80
75
70
65
60
55
50
45
40
35
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
3.3 Current derating graphs for capacitors 1200 V DC
B25620B1227K204
50
45
40
35
30
25
20
Current Derating @ Ths = 75 °C
B25620B1307K204
50
45
40
35
30
25
20
40 43 46 49 52 55 58 61 64 67 70
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
B25620B1347K204
50
45
40
35
30
25
20
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
Current Derating @ Ths = 75 °C
T e m p. ( °C )
B25620B1447K204
80
70
60
50
40
30
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 16 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B25620B1557K204
B25620B1367K203
Current Derating @ Ths = 75 °C
80
75
70
65
60
55
50
45
40
35
70
65
60
55
50
45
40
35
30
T e m p. ( °C )
B25620B1507K203
T e m p. ( °C )
B25620B1577K203
Current Derating @ Ths = 75 °C
75
70
65
60
55
50
45
40
35
30
40 43 46 49 52 55 58 61 64 67 70
B25620B1737K203
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
80
75
70
65
60
55
50
45
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
40 43 46 49 52 55 58 61 64 67 70
75
70
65
60
55
50
45
40
35
30
B2562*
T e m p. ( °C )
B25620B1108K203
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
80
75
70
65
60
55
50
45
Current Derating @ Ths = 75 °C
40 43 46 49 52 55 58 61 64 67 70
T e m p. ( °C )
Current derating graphs for capacitors rated 900 / 1320 / 1980 V DC are available upon request.
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 17 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
4. FIT
FIT Rate
10000
FIT
1000
100
10
1
0,8
0,9
1
1,1
1,2
V/Vnx Un
Voltage
Θhs
60º C
65º C
70º C
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
75º C
80º C
January 2013 – Version 8
Page 18 of 20
Film Capacitors – Power Electronic Capacitors
MKP DC
B2562*
Cautions and warnings
 In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at
all.
 Check tightness of the connections/terminals periodically.
 The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit
the capacitor before handling.
 Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
 EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper
installation and application of capacitors for power electronics.
Safety
 Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage
may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical
disruption of the capacitor.
 Ensure good, effective grounding for capacitor enclosures.
 Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy
contained in capacitors).
 Handle capacitors carefully, because they may still be charged even after disconnection.
 The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized.
 Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at
extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali,
salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals
is required to avoid conductive path between phases and/or phases and ground.
The maximum storage temperature is 85 °C.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors,
too. The maximum service life expectancy may vary depending on the application the capacitor is used in.
FILM R&D / FILM P PM
Please read Cautions and warnings and
Important notes at the end of this document.
January 2013 – Version 8
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on the
Internet at www.epcos.com/trademarks.
Page 20 of 20
Similar pages