Coilcraft CMT1-1.1-9L Common mode line choke Datasheet

Document 326-1
Common Mode Line Chokes – CMT
CMTs feature inductance values up to 125 mH and Irms
ratings as high as 15 Amps.
• 1250 Vrms, one minute isolation between windings
• Industry standard footprint.
• Creepage and clearance = 3.2 mm
• UL1446 Class B (130°C) Insulation System
(UL File E83628)
Coilcraft’s CMT toroid style common mode chokes are
designed to provide the highest common mode impedance
over the widest frequency range. These parts are ideal for
any application requiring a high DC current bias and are
well suited for use in switch-mode power supplies.
Common mode chokes are most effective in filtering supply and return conductors with in-phase signals of equal
amplitude. Differential mode inductors are available for
filtering out-of-phase or uneven amplitude signals.
0.118
3,00
Recommended
PC Board Layout
Schematic
Part
number
H max
2
L max
0.120/0.180
3,05/4,57
4
2
3
Internal
codes
CMTX-X.X-XL
XXXX
CC-3 Y
1
1
Parts manufactured
prior to
September 2011
may be
marked differently.
1
X
Weights:
2
3
W max
4
CMT1: 13.3 – 25.5 g;
CMT2: 20.7– 41.7 g;
CMT3: 42.5 – 77.2 g;
CMT4: 115 – 117 g
Terminations: Tin-silver over copper
3
2
Y
CMT-1
Series
Leakage
Lead
Part L min1 Irms inductance2 DCR max3
number
(mH)
(A)
max (µH)
(Ohms)
CMT1-5.0-1L
CMT1-8.0-1L
CMT1-15.0-1L
CMT1-2.5-2L
CMT1-4.0-2L
CMT1-7.5-2L
CMT1-1.3-4L
CMT1-2.1-4L
CMT1-3.7-4L
CMT1-1.0-6L
CMT1-1.7-6L
CMT1-3.0-6L
CMT1-.6-9L
CMT1-1.1-9L
CMT1-1.9-9L
CMT1-.5-12L
CMT1-.8-12L
CMT1-1.4-12L
CMT1-.3-15L
CMT1-.6-15L
CMT1-1.1-15L
1.
2.
3.
4.
5.
5.0
8.0
15.0
2.5
4.0
7.5
1.3
2.1
3.7
1.0
1.7
3.0
0.6
1.1
1.9
0.5
0.8
1.4
0.3
0.6
1.1
1.0
1.0
1.0
2.0
2.0
2.0
4.0
4.0
4.0
6.0
6.0
6.0
9.0
9.0
9.0
12.0
12.0
12.0
15.0
15.0
15.0
80
125
233
42
70
74
20
36
40
19
34
35
11
12
20
9
9
16
6
6.5
13.7
0.207
0.270
0.430
0.090
0.095
0.108
0.029
0.040
0.036
0.022
0.032
0.027
0.012
0.013
0.017
0.008
0.008
0.011
0.005
0.006
0.008
H
max
L
max
W
max
1.100/27,9
1.100/27,9
1.155/29,4
1.100/27,9
1.050/26,7
1.155/29,4
1.100/27,9
1.100/27,9
1.125/28.6
1.100/27,9
1.155/29,4
1.200/30,5
1.200/30,5
1.300/33.0
1.300/33.0
1.200/30,5
1.200/30,5
1.300/33.0
1.300/33.0
1.250/31.8
1.250/31.8
1.210/30,7
1.210/30,7
1.300/33,0
1.210/30,7
1.210/30,7
1.300/33,0
1.210/30,7
1.210/30,7
1.300/33,0
1.210/30,7
1.300/33,0
1.210/30,7
1.210/30,7
1.210/30,7
1.400/35,6
1.210/30,7
1.210/30,7
1.210/30,7
1.210/30,7
1.210/30,7
1.210/30,7
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.625/15,9
0.650/16,5
0.650/16,5
0.650/16,5
0.625/15,9
0.650/16,5
0.700/17,8
X
Y
diameter
±0.01/0,25 ±0.01/0,25
nom
PC board
hole
diameter
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.80/20,3
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.071/1,80
0.071/1,80
0.071/1,80
0.081/2,06
0.081/2,06
0.081/2,06
0.091/2,32
0.091/2,32
0.091/2,32
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.40/10,2
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.042/1,07
0.042/1,07
0.042/1,07
0.048/1,22
0.048/1,22
0.048/1,22
0.054/1,37
0.054/1,37
0.054/1,37
Inductance is per winding, tested at 15.75 kHz, 0 Adc.
Leakage inductance is measured from pin 1 to pin 4 with pins 2 and 3 shorted.
DCR is per winding.
Operating temperature range –40°C to +85°C.
Electrical specifications at 25°C.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 326-1
Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 326-2
Common Mode Line Chokes – CMT Series
0.118
3,00
Recommended
PC Board Layout
Schematic
Part
number
H max
0.120/0.180
3,05/4,57
2
L max
4
2
3
Internal
codes
CMTX-X.X-XL
XXXX
CC-3 Y
1
1
Parts manufactured
prior to
September 2011
may be
marked differently.
1
X
Weights:
2
3
W max
4
CMT1: 13.3 – 25.5 g;
CMT2: 20.7– 41.7 g;
CMT3: 42.5 – 77.2 g;
CMT4: 115 – 117 g
Terminations: Tin-silver over copper
3
2
Y
CMT-2
Series
Leakage
Lead
Part L min1 Irms inductance2 DCR max3
number
(mH)
(A)
max (µH)
(Ohms)
CMT2-7.5-1L
CMT2-13-1L
CMT2-3.8-2L
CMT2-6.5-2L
CMT2-1.9-4L
CMT2-3.3-4L
CMT2-1.5-6L
CMT2-2.6-6L
CMT2-.9-9L
CMT2-1.5-9L
CMT2-.7-12L
CMT2-1.2-12L
CMT2-.5-15L
CMT2-.8-15L
1.
2.
3.
4.
5.
7.5
13.0
3.8
6.5
1.9
3.3
1.5
2.6
0.9
1.5
0.7
1.2
0.5
0.8
1.0
1.0
2.0
2.0
4.0
4.0
6.0
6.0
9.0
9.0
12.0
12.0
15.0
15.0
90
190
48
98
26
45
21
41
17
15
14
14
8.7
10
0.270
0.415
0.106
0.145
0.038
0.055
0.029
0.040
0.014
0.013
0.011
0.011
0.007
0.007
H
max
L
max
W
max
1.100/27,9
1.300/33,0
1.100/27,9
1.300/33,0
1.100/27,9
1.300/33,0
1.100/27,9
1.400/35,6
1.200/30,5
1.250/31,8
1.200/30,5
1.200/30,5
1.300/33.0
1.200/30,5
1.310/33,3
1.310/33,3
1.310/33,3
1.310/33,3
1.310/33,3
1.310/33,3
1.310/33,3
1.400/35,6
1.310/33,3
1.250/31,8
1.250/31,8
1.250/31,8
1.300/33,0
1.250/31,8
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.900/22,9
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
0.825/21,0
X
Y
diameter
±0.01/0,25 ±0.01/0,25
nom
PC board
hole
diameter
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.071/1,80
0.071/1,80
0.081/2,06
0.081/2,06
0.091/2,32
0.091/2,32
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.60/15,2
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.042/1,07
0.042/1,07
0.048/1,22
0.048/1,22
0.054/1,37
0.054/1,37
Inductance is per winding, tested at 15.75 kHz, 0 Adc.
Leakage inductance is measured from pin 1 to pin 4 with pins 2 and 3 shorted.
DCR is per winding.
Operating temperature range –40°C to +85°C.
Electrical specifications at 25°C.
CMT-3
Series
Leakage
Lead
Part L min1 Irms inductance2 DCR max3
number
(mH)
(A)
max (µH)
(Ohms)
CMT3-32-1L
CMT3-56-1L
CMT3-16-2L
CMT3-28-2L
CMT3-8-4L
CMT3-14-4L
CMT3-6.6-6L
CMT3-11.5-6L
CMT3-4-9L
CMT3-7-9L
CMT3-3-12L
CMT3-5.2-12L
CMT3-2.5-15L
CMT3-4.4-15L
1.
2.
3.
4.
5.
32.0
56.0
16.0
28.0
8.0
14.0
6.6
11.5
4.0
7.0
3.0
5.2
2.5
4.4
1.0
1.0
2.0
2.0
4.0
4.0
6.0
6.0
9.0
9.0
12.0
12.0
15.0
15.0
485
780
210
410
57.5
180
49
140
37
104
40
47
42
48
0.650
0.900
0.240
0.330
0.061
0.120
0.048
0.088
0.026
0.045
0.022
0.025
0.019
0.017
H
max
L
max
W
max
1.400/35,6
1.650/41,9
1.400/35,6
1.650/41,9
1.350/34,3
1.700/43,2
1.400/35,6
1.700/43,2
1.400/35,6
1.760/44,7
1.700/43,2
1.700/43,2
1.750/44,5
1.700/43,2
1.650/41,9
1.650/41,9
1.650/41,9
1.650/41,9
1.650/41,9
1.650/41,9
1.600/40,6
1.650/41,9
1.450/36,8
1.760/44,7
1.700/43,2
1.700/43,2
1.750/44,5
1.700/43,2
0.925/23,5
0.925/23,5
0.925/23,5
0.925/23,5
0.925/23,5
0.950/24,1
0.925/23,5
0.925/23,5
0.925/23,5
0.975/24,8
0.950/24,1
1.000/25,4
1.000/25,4
1.000/25,4
X
Y
diameter
±0.01/0,25 ±0.01/0,25
nom
PC board
hole
diameter
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
1.20/30,5
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.071/1,80
0.071/1,80
0.081/2,06
0.081/2,06
0.091/2,32
0.091/2,32
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.70/17,8
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.042/1,07
0.042/1,07
0.048/1,22
0.048/1,22
0.054/1,37
0.054/1,37
Inductance is per winding, tested at 15.75 kHz, 0 Adc.
Leakage inductance is measured from pin 1 to pin 4 with pins 2 and 3 shorted.
DCR is per winding.
Operating temperature range –40°C to +85°C.
Electrical specifications at 25°C.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 326-2
Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 326-3
Common Mode Line Chokes – CMT Series
0.118
3,00
Recommended
PC Board Layout
Schematic
Part
number
H max
0.120/0.180
3,05/4,57
2
L max
4
2
3
Internal
codes
CMTX-X.X-XL
XXXX
CC-3 Y
1
1
Parts manufactured
prior to
September 2011
may be
marked differently.
1
X
Weights:
2
3
W max
4
CMT1: 13.3 – 25.5 g;
CMT2: 20.7– 41.7 g;
CMT3: 42.5 – 77.2 g;
CMT4: 115 – 117 g
Terminations: Tin-silver over copper
3
2
Y
CMT-4
Series
Leakage
Lead
Part L min1 Irms inductance2 DCR max3
number
(mH)
(A)
max (µH)
(Ohms)
CMT4-72-1L
72.0
CMT4-125-1L 125.0
CMT4-36-2L
36.0
CMT4-62-2L
62.0
CMT4-19-4L
19.0
CMT4-32-4L
32.0
CMT4-15-6L
15.0
CMT4-26-6L
26.0
CMT4-10-9L
10.0
CMT4-17-9L
17.0
CMT4-7.5-12L
7.5
CMT4-13-12L
13.0
CMT4-6-15L
6.0
CMT4-10-15L
10.0
1.
2.
3.
4.
5.
1.0
1.0
2.0
2.0
4.0
4.0
6.0
6.0
9.0
9.0
12.0
12.0
15.0
15.0
1400
1400
680
750
350
370
275
320
190
220
140
155
111
122
1.150
1.150
0.415
0.415
0.150
0.158
0.114
0.115
0.057
0.062
0.042
0.043
0.030
0.029
H
max
L
max
W
max
2.100/53,3
2.200/55,9
2.215/56,3
2.200/55,9
2.200/55,9
2.200/55,9
2.200/55,9
2.225/56,5
2.200/55,9
2.280/57,9
2.200/55,9
2.250/57,2
2.250/57,2
2.280/57,9
2.100/53,3
2.150/54,6
2.150/54,6
2.150/54,6
2.180/55,4
2.180/55,4
2.180/55,4
2.180/55,4
2.180/55,4
2.250/57,2
2.250/57,2
2.300/58,4
2.250/57,2
2.300/58,4
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.130/28,7
1.150/29,2
1.130/28,7
1.130/28,7
1.150/29,2
1.130/28,7
X
Y
diameter
±0.01/0,25 ±0.01/0,25
nom
PC board
hole
diameter
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
1.50/38,1
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.091/2,32
0.071/1,80
0.071/1,80
0.081/2,06
0.081/2,06
0.091/2,32
0.091/2,32
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.90/22,9
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.054/1,37
0.042/1,07
0.042/1,07
0.048/1,22
0.048/1,22
0.054/1,37
0.054/1,37
Inductance is per winding, tested at 15.75 kHz, 0 Adc.
Leakage inductance is measured from pin 1 to pin 4 with pins 2 and 3 shorted.
DCR is per winding.
Operating temperature range –40°C to +85°C.
Electrical specifications at 25°C.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 326-3
Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 326-4
Common Mode Line Chokes – CMT Series
Typical Common Mode Attenuation (Ref: 50 Ohms)
CMT1 and CMT2
CMT3 and CMT4
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 326-4
Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 326-5
Common Mode Line Chokes – CMT Series
Typical Impedance
CMT1 and CMT2
CMT3 and CMT4
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 326-5
Revised 05/21/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages