Ecliptek ECCM5B5DD-20-32.000MTR Crystal Datasheet

Marketing Bulletin
DATE:
January 15th, 2007
TO:
All Sales Personnel
FROM:
Isaac Gonzalez
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective January 15th, 2008:
Series
ECCM5B
Description
3.5x6.0mm Ceramic 2Pad SMD Crystal
Recommended Replacement
ECCM5A
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after January 1st, 2009, with
delivery to conclude by April 1st, 2009.
If there are any questions pertaining to this bulletin, please feel free to contact me.
Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez
Configuration Manager
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
ECCM5B Series
ECCM5B
• RoHS Compliant (Pb-Free)
• Miniature two pad ceramic
surface mount package
• AT cut
• Tight tolerance/stability
• Frequencies to 32.000MHz available
• Tape and reel available
NOTES
H
L
W
1.0
6.0
3.5
CRYSTAL
OBSOLETE
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
11.0592MHz to 32.000MHz
Frequency Tolerance
±30ppm, or ±50ppm
Frequency Stability
Per Table 1
Operating Temperature Range
Per Table 1
Aging (at 25°C)
±2ppm / year Maximum
Storage Temperature Range
-40°C to 85°C
Shunt Capacitance
5pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100VDC
Drive Level
100 µWatts Maximum
Load Capacitance (CL)
18pF (Standard), CL ≥10pF, or Series Resonant
Spurious Response
-3dB Minimum; F0 to F0 +5000ppm
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Frequency Range
Mode / Cut
ESR (Ω)
11.0592MHz to 24.000MHz
50 Maximum
Fundamental / AT
24.001MHz to 32.000MHz
40 Maximum
Fundamental / AT
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
REV.DATE
ECLIPTEK CORP.
CRYSTAL
ECCM5B
CERAMIC
CR39
09/03
800-ECLIPTEK www.ecliptek.com for latest revision
38
Specifications subject to change without notice.
PART NUMBERING GUIDE
ECCM5B 5 D C - 20 - 32.000M TR
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel
FREQUENCY TOLERANCE (AT 25°C)
5=±30ppm, 6=±50ppm
FREQUENCY
FREQUENCY STABILITY
D=±20ppm, E=±30ppm, F=±50ppm
LOAD CAPACITANCE
Blank=18pF (Standard)
S=Series, XX=XXpF (Custom)
OPERATING TEMPERATURE RANGE
Per Table 1
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pad 1: Input/Output
Pad 2: Input/Output
TAPE AND REEL DIMENSIONS
Tolerance = +0.2
ALL DIMENSIONS IN MILLIMETERS
A
B
C
D
E
16±.3
7.5±.1
6.75±.2
4 ±.1
2±.05
TAPE
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
F
G
H
J
K
L
R
S
T
U
V
8±.1
3.9±.1
1.5±.1
6.4±.1
.3 ±.05
1.3±.1
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER
SPECIFICATION
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
*Compliant to EIA-481A
Line 1: E XX.XX
Frequency in MHz
(4 Digits Maximum + Decimal)
Line 2: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
REV.DATE
ECLIPTEK CORP.
CRYSTAL
ECCM5B
CERAMIC
CR39
09/03
800-ECLIPTEK www.ecliptek.com for latest revision
39
Specifications subject to change without notice.
Similar pages