STMicroelectronics LD1585CD2M90 5a low dropout fast response positive voltage regulator adjustable and fixed Datasheet

LD1585C
SERIES
5A LOW DROPOUT FAST RESPONSE
POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
■
■
■
■
■
■
■
■
■
TYPICAL DROPOUT 1.2V
FAST TRANSIENT RESPONSE
THREE TERMINAL ADJUSTABLE OR FIXED
OUTPUT VOLTAGE 1.5V 1.8V, 2.5V, 2.85V,
3.3V, 5V, 8V, 9V, 12V.
GUARANTEED OUTPUT CURRENT UP TO
5A
OUPUT TOLERANCE ±1% AT 25°C AND
±2% IN FULL TEMPERATURE RANGE
INTERNAL POWER AND THERMAL LIMIT
WIDE OPERATING TEMPERATURE RANGE
0°C TO 125°C
PACKAGE AVAILABLE : TO-220, D2PAK,
D2PAK/A
PINOUT COMPATIBILITY WITH STANDARD
ADJUSTABLE VREG
DESCRIPTION
The LD1585C is a LOW DROP Voltage Regulator
able to provide up to 5A of Output Current.
Dropout is guaranteed at a maximum of 1.4V at
the maximum output current, decreasing at lower
loads. The device has been improved to be
utilized in low voltage applications where transient
response and minimum input voltage are critical.
The most important feature of the device consist in
lower dropout voltage and very fast transient
TO-220
D2PAK
D2PAK/A
response. A 2.85V output version is suitable for
SCSI-2 active termination. Unlike PNP regulators,
where a part of the output current is wasted as
quiescent current, the LD1585C quiescent current
flows into the load, so increase efficiency. Only a
10µF minimum capacitor is need for stability.
The device is supplied in TO-220, D2PAK and
D2PAK/A. On chip trimming allows the regulator to
reach a very tight output voltage tolerance, within
±1% at 25°C.
SCHEMATIC DIAGRAM
September 2003
1/17
LD1585C SERIES
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter²
Value
Unit
VI
DC Input Voltage
30
V
IO
Output Current
Internally Limited
mA
Internally Limited
mW
-55 to +150
°C
0 to +125
°C
PD
Power Dissipation
Tstg
Storage Temperature Range
Top
Operating Junction Temperature Range
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is
not implied.
THERMAL DATA
Symbol
Parameter
TO-220
D2PAK
Unit
Rthj-case
Thermal Resistance Junction-case
3
3
°C/W
Rthj-amb
Thermal Resistance Junction-ambient
50
62.5
°C/W
APPLICATION CIRCUITS
R2
VO = VREF (1 + )
R1
2/17
LD1585C SERIES
CONNECTION DIAGRAM (top view)
TO-220
D2PAK
D2PAK/A
ORDERING CODES
TO-220
D2PAK (*)
D2PAK/A (*)
OUTPUT VOLTAGE
LD1585CV15
LD1585CV18
LD1585CV25
LD1585CV28
LD1585CV33
LD1585CV50
LD1585CV80
LD1585CV90
LD1585CV12
LD1585CV
LD1585CD2T15
LD1585CD2T18
LD1585CD2T25
LD1585CD2T28
LD1585CD2T33
LD1585CD2T50
LD1585CD2T80
LD1585CD2T90
LD1585CD2T120
LD1585CD2T
LD1585CD2M15
LD1585CD2M18
LD1585CD2M25
LD1585CD2M28
LD1585CD2M33
LD1585CD2M50
LD1585CD2M80
LD1585CD2M90
LD1585CD2M120
LD1585CD2M
1.5 V
1.8 V
2.5 V
2.85 V
3.3 V
5.0 V
8.0 V
9.0 V
12.0 V
ADJ
(*) Available in Tape & Reel with the suffix "R" for fixed version and "-R" for adjustable version.
3/17
LD1585C SERIES
ELECTRICAL CHARACTERISTICS OF LD1585#15 (VI=4.5V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 3 to 25V (note 1)
IO = 0 mA
VI = 3 to 15V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
1.5
1.515
V
1.47
1.5
1.53
V
0.005
0.2
%
0.005
0.2
%
0.3
%
0.05
0.5
%
IO =5 A
1.2
1.4
V
5
10
mA
Iq
Quiescent Current
VI ≤ 25V
Short Circuit Current
VI - VO = 5V
5.5
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
1.485
VI = 3 to 15V
Unit
0.05
Isc
S
S
Max.
IO = 0 to 5A TJ = 25°C
Dropout Voltage
eN
Typ.
IO = 0 to 5A
Vd
SVR
TJ = 25°C
Min.
7
0.004
60
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
ELECTRICAL CHARACTERISTICS OF LD1585#18 (VI=4.8V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 3.3 to 25V (note 1)
IO = 0 mA
VI = 3.3 to 15V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
Min.
Typ.
Max.
Unit
1.782
1.8
1.818
V
1.764
1.8
1.836
V
mV
VI = 3.3 to 15V
0.005
0.2
0.005
0.2
IO = 0 to 5A TJ = 25°C
0.05
0.3
IO = 0 to 5A
0.05
0.5
mV
Vd
Dropout Voltage
IO =5 A
1.2
1.4
V
Iq
Quiescent Current
VI ≤ 25V
5
10
mA
0.02
%/W
Isc
SVR
eN
S
S
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
7
0.004
60
A
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
4/17
5.5
1
%
%
LD1585C SERIES
ELECTRICAL CHARACTERISTICS OF LD1585#25 (VI=5.5V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 4 to 25V (note 1)
IO = 0 mA
VI = 4 to 16V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
2.475
2.5
2.525
V
2.45
2.5
2.55
V
0.005
0.2
mV
0.005
0.2
0.05
0.3
0.05
0.5
IO =5 A
1.2
1.4
V
5
10
mA
Iq
Quiescent Current
VI ≤ 25V
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
Unit
IO = 0 to 5A TJ = 25°C
Isc
S
S
Max.
IO = 0 to 5A
Dropout Voltage
eN
Typ.
VI = 4 to 16V
Vd
SVR
Min.
5.5
7
0.004
60
mV
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
ELECTRICAL CHARACTERISTICS OF LD1585#285 (VI=5.85V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 4.5 to 30V (note 1)
IO = 0 mA
VI = 4.5 to 18V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
Min.
Typ.
Max.
Unit
2.821
2.85
2.879
V
2.793
2.85
2.907
V
mV
VI = 4.5 to 18V
0.005
0.2
0.005
0.2
IO = 0 to 5A TJ = 25°C
0.05
0.3
IO = 0 to 5A
0.05
0.5
mV
Vd
Dropout Voltage
IO =5 A
1.2
1.4
V
Iq
Quiescent Current
VI ≤ 25V
5
10
mA
0.02
%/W
Isc
SVR
eN
S
S
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
5.5
7
0.004
60
A
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
5/17
LD1585C SERIES
ELECTRICAL CHARACTERISTICS OF LD1585#33 (VI=6.3V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 4.8 to 25V (note 1)
IO = 0 mA
VI = 4.8 to 18V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
3.267
3.3
3.333
V
3.35
3.366
V
mV
0.005
0.2
0.005
0.2
0.05
0.3
0.05
0.5
IO =5 A
1.2
1.4
V
5
10
mA
Iq
Quiescent Current
VI ≤ 25V
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
Unit
IO = 0 to 5A TJ = 25°C
Isc
S
S
Max.
IO = 0 to 5A
Dropout Voltage
eN
Typ.
3.234
VI = 4.9 to 18V
Vd
SVR
Min.
5.5
7
0.004
60
mV
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
ELECTRICAL CHARACTERISTICS OF LD1585#50 (VI=8V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 6.5 to 30V (note 1)
IO = 0 mA
VI = 6.5 to 20V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
Min.
Typ.
Max.
Unit
4.95
5
5.05
V
4.9
5
5.1
V
mV
VI = 6.5 to 20V
0.005
0.2
0.005
0.2
IO = 0 to 5A TJ = 25°C
0.05
0.3
IO = 0 to 5A
0.05
0.5
mV
Vd
Dropout Voltage
IO =5 A
1.2
1.4
V
Iq
Quiescent Current
VI ≤ 25V
5
10
mA
0.02
%/W
Isc
SVR
eN
S
S
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
7
0.004
60
A
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
6/17
5.5
1
%
%
LD1585C SERIES
ELECTRICAL CHARACTERISTICS OF LD1585#80 (VI=11V, C I = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 9.5 to 30V (note 1)
IO = 0 mA
VI = 9.5 to 20V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
7.92
8
8.08
V
8
8.16
V
mV
0.005
0.2
0.005
0.2
0.05
0.3
0.05
0.5
IO =5 A
1.2
1.4
V
5
10
mA
Iq
Quiescent Current
VI ≤ 25V
Short Circuit Current
VI - VO = 5.5V
5.5
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
Unit
IO = 0 to 5A TJ = 25°C
Isc
S
S
Max.
IO = 0 to 5A
Dropout Voltage
eN
Typ.
7.84
VI = 9.5 to 20V
Vd
SVR
Min.
7
0.004
60
mV
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
ELECTRICAL CHARACTERISTICS OF LD1585#90 (VI=12V, C I = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
Parameter
Test Conditions
VO
Output Voltage
IO = 0 mA
TJ = 25°C
∆VO
Line Regulation
∆VO
Load Regulation
IO = 0 to 5A TJ = 25°C
IO = 0 to 5A
Vd
Dropout Voltage
IO =5 A
Iq
Quiescent Current
VI ≤ 25V
Isc
Short Circuit Current
VI - VO = 5.5V
IO = 0 to 5A VI = 10.5 to 30V (note 1)
SVR
eN
S
S
IO = 0 mA
VI = 10.5 to 20V
IO = 0 mA
VI = 10.5 to 20V
Typ.
Max.
Unit
8.91
9
9.09
V
8.82
TJ = 25°C
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
Min.
5.5
9
9.18
V
0.005
0.2
mV
0.005
0.2
0.05
0.3
0.05
0.5
1.2
1.4
V
5
10
mA
7
0.004
60
mV
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
7/17
LD1585C SERIES
ELECTRICAL CHARACTERISTICS OF LD1585#120 (VI=15V, C I = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
∆VO
Parameter
Test Conditions
Output Voltage
IO = 0 mA
Line Regulation
IO = 0 to 5A VI = 13.5 to 30V (note 1)
IO = 0 mA
VI = 13.5 to 25V TJ = 25°C
IO = 0 mA
∆VO
Load Regulation
TJ = 25°C
11.88
12
12.12
V
12
12.24
V
mV
0.005
0.2
0.005
0.2
0.05
0.3
0.05
0.5
IO =5 A
1.2
1.4
V
5
10
mA
Iq
Quiescent Current
VI ≤ 25V
Short Circuit Current
VI - VO = 5.5V
5.5
Termal Regulation
TJ = 25°C, 30ms pulse
Supply Voltage Rejection
f = 120 Hz, CO = 25 µF, IO = 5A
VI - VO = 3 ± 1V
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
TJ = 125°C
Temperature Stability
Long Term Stability
Unit
IO = 0 to 5A TJ = 25°C
Isc
S
S
Max.
IO = 0 to 5A
Dropout Voltage
eN
Typ.
11.76
VI = 13.5 to 25V
Vd
SVR
Min.
7
0.004
60
mV
A
0.02
%/W
75
dB
f =10Hz to 10KHz
0.003
%
1000Hrs
0.5
0.03
1
%
%
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
ELECTRICAL CHARACTERISTICS OF LD1585# (VI=4.25V, CI = CO =10µF, TJ = 0 to 125°C, unless
otherwise specified.)
Symbol
VO
Parameter
Test Conditions
Output Voltage
IO = 10mA
∆VO
Line Regulation
IO = 10mA to 5AVI - VO =1.5 to 25V
(note 1)
IO = 10mA VI = 2.75 to 15V TJ = 25°C
∆VO
Load Regulation
IO = 10mA to 5ATJ = 25°C
IO = 0 to 5A
Vd
Dropout Voltage
IO = 5A
IO = 10mA
IO(min)
Isc
VI - VO = 3V TJ = 25°C
Minimum Load Current
VI = 25V
Short Circuit Current
VI - VO = 5.5V
Termal Regulation
TJ = 25°C, 30ms pulse
f = 120 Hz,
IO = 5A
IADJ
CO = 25 µF, CADJ = 25 µF,
VI - VO = 3 ± 1V
Adjust Pin Current
IO = 10 mA
∆IADJ
Adjust Pin Current Change
IO = 10mA to 5A
eN
RMS Output Noise Voltage
(% of VO)
TJ = 25°C
f =10Hz to 10KHz
TJ = 125°C
1000Hrs
Temperature Stability
Long Term Stability
VI = 3 to 25V (note 1)
NOTE 1: See short-circuit current curve for available output current at fixed dropout.
8/17
Max.
Unit
1.237
1.25
1.263
V
1.25
1.275
V
0.015
0.2
%
0.1
0.2
%
0.1
0.3
%
0.25
0.5
%
1.2
1.4
V
3
10
mA
5.5
Supply Voltage Rejection
Typ.
1.225
VI = 2.75 to 15V
SVR
S
S
Min.
7
0.004
60
A
0.02
75
%/W
dB
50
100
µA
0.2
5
µA
0.003
%
0.5
0.5
%
%
LD1585C SERIES
TYPICAL CHARACTERISTICS (unless otherwise specified Tj = 25°C, CI=CO=10µF tant)
Figure 1 : Output Voltage vs Temperature
Figure 4 : Line Regulation vs Temperature
Figure 2 : Short Circuit Current vs Dropout
Voltage
Figure 5 : Load Regulation vs Temperature
Figure 3 : Line Regulation vs Temperature
Figure 6 : Load Regulation vs Temperature
9/17
LD1585C SERIES
Figure 7 : Dropout Voltage vs Temperature
Figure 10 : Adjust Pin Current vs Temperature
Figure 8 : Dropout Voltage vs Output Current
Figure 11 : Adjust Pin Current Change vs
Temperature
Figure 9 : Adjust Pin Current vs Input Voltage
Figure 12 : Quiescent Current vs Temperature
10/17
LD1585C SERIES
Figure 13 : Reference Voltage vs Temperature
Figure 16 : Supply Voltage Rejection vs Output
Current
Figure 14 : Minimum Load Current vs
Temperature
Figure 17 : Supply Voltage Rejection vs
Frequency
Figure 15 : Supply Voltage Rejection vs Output
Current
Figure 18 : Supply Voltage Rejection vs
Frequency
11/17
LD1585C SERIES
Figure 19 : Supply Voltage Rejection vs
Temperature
Figure 22 : Load Transient
VI=15 V, I O=0.1 to 5 A, CI = 10µF(tant), CO=10µF(tant)
Figure 20 : Supply Voltage Rejection vs
Temperature
Figure 23 : Load Transient
VI=7 V, IO=0.1 to 5 A, CI = 10µF(tant), CO=10µF(tant)
Figure 21 : Line Transient
VI=15 to 16V, IO=200mA, CI = 1µF(tant), CO=10µF(tant),
12/17
LD1585C SERIES
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
D1
1.27
0.050
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.067
F2
1.14
1.70
0.044
0.067
G
4.95
5.15
0.194
0.203
G1
2.4
2.7
0.094
0.106
H2
10.0
10.40
0.393
0.409
L2
16.4
0.645
L4
13.0
14.0
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.2
6.6
0.244
0.260
L9
3.5
3.93
0.137
0.154
DIA.
3.75
3.85
0.147
0.151
P011C
13/17
LD1585C SERIES
D2PAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
D1
E
8
10
E1
0.315
8.5
0.409
0.335
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.624
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
V2
0.4
0˚
0.126
0.016
8˚
0˚
8˚
P011P6G
14/17
LD1585C SERIES
D2PAK/A MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
A1
2.49
2.69
0.098
0.106
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.60
0.017
0.023
C2
1.21
1.36
0.047
0.053
D
8.95
9.35
0.352
0.368
E
10
10.4
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.106
L2
1.27
1.4
0.050
0.055
15/17
LD1585C SERIES
Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MIN.
TYP.
180
13.0
13.2
MAX.
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
16/17
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
10.50
10.6
10.70
0.413
0.417
0.421
Bo
15.70
15.80
15.90
0.618
0.622
0.626
Ko
4.80
4.90
5.00
0.189
0.193
0.197
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
11.9
12.0
12.1
0.468
0.472
0.476
LD1585C SERIES
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2003 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
17/17
Similar pages