PCN11 Series (Product Compliant with DIN Standard: Solderless Connection Type) Backplane Connection Plug-Right Angle [PCN12(A)-*P-2.54DS 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100(12A) 3-row: 96(12, 12A) 4-row: PCN 10(A)-128P-2.54DS] Socket- Right Angle PCN10C-*S-2.54DS(double-sided 2-point contacts) PCN13-*S-2.54DS(single-sided 1-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 (16 core for PCN13 only) 3-row: PCN10A(B)-96S-2.54DS PCN13(B)-96S-2.54DS 4-row: PCN10B-128S-2.54DS Plug-Straight PCN10-*S-2.54DSA 2-row: 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 Socket-Straight ■Features 1. Compliant with the DIN standard Comply with IEC603-2/DIN41612 standards. Cable Type Crimping(AWG22~30) PCN10-*S-2.54DSA 2-row: 20, 50, 64 3-row: 96 Crimping(AWG28) PCN10-64S-2.54R 3-row 96 contact type without row b 2. Variation in number of contacts The socket contact is constructed with the high reliability double-sided 2-point contacts. 4. Applicable contact board thickness The applicable contact board thickness is 2.54mm min. 5. Through-hole diameter variation Ø0.8, Ø0.9 andØ1.0 through holes are available. 6. Backplane connection Connected to the Backplane. Refer to the fig 1 7. Compatibility with other series Compatibility with PCN10, 12, and 13 series allows to utilize various application patterns. 8. Press fit machine Press fit machine is available. ■Application PBX, control equipment and so on. A86 For connector mating sizes, refer to the application pattern. Fig 1 10, 16, 20, 32, 44, 50, 64, 90, 96, 100 and 128 contacts are available. 3. Reliabillty contact construction PCN11-*S-2.54PFB(double-sided 2-point contacts) PCN12-*S-2.54DSA PCN13-*S-2.54DSA(single-sided 1-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 (PCN11, 13) Press fit Machine ■Product Specifications Current rating: 2A Operating Temperature Range: -30 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) Voltage rating: 300V AC Operating Humidity Range: 40 to 80% Operating Humidity Range: 40 to 70% (Note 2) Rating Item Specification Condition 1.Insulation Resistance 10 M ohms 100V DC 2.Withstanding Voltage No flashover or insulation breakdown. 1000V AC/1 minute. 3.Contact Resistance 20m ohms max. 0.1A 4.Vibration No electrical discontinuity of 10µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6 5.Humidity (Steady state) Insulation resistance : 106M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6.Temperature Cycle (-65ç : 30 minutes→15 to 35ç: 5 minutes max.→ 125ç : 30 minutes→15 to 35ç: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 500 cycles 7.Durability (Mating/un-mating) Contact resistance : 20m ohms max. 8.Resistance to Solderingr heat No deformation of components affecting performance. Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■ Material ●Housing, Contact Board and Key Header Parts Material Insulator PBT Contact Copper alloy Finish Remarks Contact area: Gold plated Remainder: Gold plated --------------- ●Receptacle, Backplane Housing Parts Material Finish Remarks Insulator PBT Beige UL94V-0 Contact Copper alloy PFB Contact area: Gold plated Remainder: Tin-lead plated WB Contact area: Gold plated Remainder: Gold flash plated Post area: Gold plated --------------- ■Ordering Information ●Housing PCN11 q A – * P – 2.54 H 2 w e r t y u q Series name : PCN11 w Mounting hole type Blank A : With Mounting hole : Without mounting hole e Number of contacts : 20, 32, 44, 50, 64, 90, 96, 100 r Opening type P : Male connector t Contact pitch : 2.54mm y H : Housing u Board thickness 2 : 2.4mm A87 ●Contact Board PCN11 – * P – 2.54 WA – 2 q w e r t q Series name : PCN11 w Number of contacts y : 20, 32, 44, 50, 64, 90, 96, 100 e Opening type P : Male connector r Contact pitch : 2.54mm t Contact type WA : Wrapping Backplane (Dia.0.8) WB : Wrapping Backplane (Dia.0.9) WC : Wrapping Backplane (Dia.1.0) y Board thickness 2 : 2.4mm ●Key Header (Correspond to Backplane system) PCN11 – * P – 2.54 KH q w e r q Series name : PCN11 w Number of contacts : 10, 14, 16, 20, 26, 30, 34, 40, 50, 64, 96 t e Opening type P : Male connector r Contact pitch : 2.54mm t KH : Key header ●Receptacle PCN11 – * S – 2.54 PFB – 2 q w e r t q Series name : PCN11 w Number of contacts : 10, 16, 20, 32, 44, 50, 64, 90, 96, 100, 128 y e Opening type S : Female connector r Contact pitch : 2.54mm t Contact type PFB : Short type (Dia.0.9) WB : Wrapping Backplane (Dia.0.9) y Board thickness 2 : 2.4mm ●Backplane Housing PCN11 q A – * P – 2.54 BP – 2 w e r t y u q Series name : PCN11 w Mounting hole type Blank A : With mounting hole : Without mounting hole e Number of contacts : 10, 16, 20, 32, 44, 50, 64, 90, 96, 100, 128 r Opening type P : Male connector t Contact pitch : 2.54mm y BP : Backplane housing (H : 128 contacts only) u Board thickness 2 : 2.4mm A88 ■2 Row Backplane (Board thickness: 2.54mm) ●Housing With mounting hole PCN11-*P-2.54H-2 Unit:mm Part Number CL No. Number of Contacts A B C D E PCN11-020P-2.54H-2 583-1050-2 20 43.3 38.1 32.1 29.47 22.86 PCN11-032P-2.54H-2 583-1051-5 32 58.54 53.34 47.34 44.71 38.1 PCN11-044P-2.54H-2 583-1052-8 44 73.78 68.58 62.58 59.95 53.34 PCN11-050P-2.54H-2 583-1053-0 50 81.4 76.2 70.2 67.57 60.96 PCN11-064P-2.54H-2 583-1054-3 64 85.35 78.74 PCN11-090P-2.54H-2 583-1055-6 90 132.2 127 121 118.37 111.76 PCN11-100P-2.54H-2 583-1056-9 100 144.9 139.7 133.7 131.07 124.46 99.18 93.98 87.98 ●Housing Without mounting hole PCN11A-*P-2.54H-2 Unit:mm Part Number CL No. Number of Contacts A B C PCN11A-020P-2.54H-2 583-1057-1 20 32.1 29.47 22.86 PCN11A-032P-2.54H-2 583-1058-4 32 47.34 44.71 38.1 PCN11A-044P-2.54H-2 583-1059-7 44 62.58 59.95 53.34 PCN11A-050P-2.54H-2 583-1060-6 50 70.2 67.57 60.96 PCN11A-064P-2.54H-2 583-1061-9 64 85.35 78.74 PCN11A-090P-2.54H-2 583-1062-1 90 121 118.37 111.76 PCN11A-100P-2.54H-2 583-1063-4 100 133.7 131.07 124.46 87.98 A89 Press fit direction ●Contact Board (Board thickness: 2.4.mm) PCN11-*P-2.54WA, WB, WC-2 BPCB mounting pattern WA(Dia.0.8 through-hole) WC(Dia.1.0 through-hole) Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts PCN11-020P-2.54WA-2 583-1011-0 20 32.06 22.86 PCN11-100P-2.54WC-2 583-1180-8 100 PCN11-032P-2.54WA-2 583-1012-3 32 47.3 38.1 PCN11-044P-2.54WA-2 583-1013-6 44 62.54 53.34 PCN11-050P-2.54WA-2 583-1014-9 50 70.16 60.96 PCN11-064P-2.54WA-2 583-1015-1 64 87.94 78.74 PCN11-090P-2.54WA-2 583-1016-4 90 120.96 111.76 PCN11-100P-2.54WA-2 583-1017-7 100 133.66 124.46 WB(Dia.0.9 through-hole) A90 Part Number CL No. Number of Contacts A B PCN11-020P-2.54WB-2 583-1043-7 20 32.06 22.86 PCN11-032P-2.54WB-2 583-1044-0 32 47.3 38.1 PCN11-044P-2.54WB-2 583-1045-2 44 62.54 53.34 PCN11-050P-2.54WB-2 583-1046-5 50 70.16 60.96 PCN11-064P-2.54WB-2 583-1047-8 64 87.94 78.74 PCN11-090P-2.54WB-2 583-1048-0 90 120.96 111.76 PCN11-100P-2.54WB-2 583-1049-3 100 133.66 124.46 A B 133.66 124.46 ●Key Header (Board thickness: 2.4mm) PCN11(A)-*P-2.54KH Unit:mm Part Number CL No. Number of Contacts A B C D PCN11A-10P-2.54KH 583-1000-4 10 19.36 17.5 10.16 4.1 PCN11A-14P-2.54KH 583-1001-7 14 24.44 22.58 15.24 4.1 PCN11A-16P-2.54KH 583-1002-0 16 26.98 25.12 17.78 4.1 PCN11A-20P-2.54KH 583-1003-2 20 32.06 30.2 22.86 4.1 PCN11A-26P-2.54KH 583-1004-5 26 39.66 37.8 30.48 4.1 PCN11A-30P-2.54KH 583-1005-8 30 44.76 42.9 35.56 4.1 PCN11A-34P-2.54KH 583-1006-0 34 49.86 48 40.64 4.1 PCN11A-40P-2.54KH 583-1007-3 40 57.46 55.6 48.26 4.1 PCN11A-50P-2.54KH 583-1008-6 50 70.16 68.3 60.96 26.96 PCN11A-50P-2.54KH 583-1034-6 50 70.16 68.3 60.96 4.1 PCN11A-60P-2.54KH 583-1009-9 60 82.86 81 73.66 26.96 PCN11A-60P-2.54KH 583-1035-9 60 82.86 81 73.66 4.1 PCN11A-64P-2.54KH 583-1010-8 64 87.96 86.1 78.74 26.96 PCN11A-64P-2.54KH 583-1036-1 64 87.96 86.1 78.74 4.1 <Connectors to correspond to PCN11(A)-*P-2.54KH are HIF3BA-*D-2.54R, HIF3BA-*D-2.54C and HIF3C-*D-2.54C.> A91 ■3 Row Backplane (Board thickness: 2.54mm) ●Housing (With mounting hole) PCN11-96P-2.54H-2 CL583-1032-0 ●Housing (Without mounting hole) PCN11A-96P-2.54H-2 CL583-1033-3 A92 Press fit direction ●Contact Board PCN11-96P-2.54WA, WB, WC-2 BPCB mounting pattern Part Number CL No. PCN11-96P-2.54WA-2 583-1030-5 Dia.0.8 through-hole PCN11-96P-2.54WB-2 583-1064-7 Dia.0.9 through-hole PCN11-96P-2.54WC-2 583-1181-0 Dia.1.0 through-hole ●Key header PCN11-96P-2.54KH CL583-1031-8 <Connectors to correspond to PCN11-96P-2.54KH are PCN10-64S-2.54R, PCN10-96S-2.54C.> A93 ■Receptacle: 2 Row Short Type PCN11-*S-2.54PFB-2 Note BPCB mounting pattern Unit:mm Part Number CL No. Number of Contacts A B C D PCN11-010S-2.54PFB-2 583-1109-3 10 26.42 21.42 16.42 10.16 PCN11-016S-2.54PFB-2 583-1110-2 16 34.04 29.04 24.04 17.78 PCN11-020S-2.54PFB-2 583-1111-5 20 39.12 34.12 29.12 22.86 PCN11-032S-2.54PFB-2 583-1112-8 32 54.36 49.36 44.36 38.1 PCN11-044S-2.54PFB-2 583-1113-0 44 69.6 64.6 59.6 53.34 PCN11-050S-2.54PFB-2 583-1114-3 50 77.22 72.22 67.22 60.96 PCN11-064S-2.54PFB-2 583-1115-6 64 PCN11-090S-2.54PFB-2 583-1116-9 90 128.02 123.02 118.02 111.76 PCN11-100S-2.54PFB-2 583-1117-1 100 140.72 135.72 130.72 124.46 NOTE: With stand off for 64, 90, 100 contacts products A94 95 90 85 78.74 ■Receptacle: 2 Row Wrapping Backplane Type PCN11-*S-2.54WB-2 Note BPCB mounting pattern Unit:mm Part Number CL No. Number of Contacts A PCN11-10S-2.54WB-2 583-1076-6 10 26.42 21.42 16.42 10.16 PCN11-16S-2.54WB-2 583-1077-9 16 34.04 29.04 24.04 17.78 PCN11-20S-2.54WB-2 583-1078-1 20 39.12 34.12 29.12 22.86 PCN11-32S-2.54WB-2 583-1079-4 32 54.36 49.36 44.36 38.1 PCN11-44S-2.54WB-2 583-1080-3 44 69.6 64.6 59.6 53.34 PCN11-50S-2.54WB-2 583-1081-6 50 77.22 72.22 67.22 60.96 PCN11-64S-2.54WB-2 583-1082-9 64 PCN11-90S-2.54WB-2 583-1083-1 90 128.02 123.02 118.02 111.76 PCN11-100S-2.54WB-2 583-1084-4 100 140.72 135.72 130.72 124.46 95 B 90 C 85 D 78.74 NOTE: With stand off for 64, 90, 100 contacts A95 ■Receptacle : 2 Row Backplane Type (t=2.4mm board) ●Housing (With Mounting hole) PCN11-*P-2.54BP-2 Unit:mm Part Number CL No. Number of Contacts A B PCN11-010P-2.54BP-2 583-1131-2 10 30.6 25.4 16.77 10.16 PCN11-016P-2.54BP-2 583-1132-5 16 38.22 33.02 24.39 17.78 PCN11-020P-2.54BP-2 583-1133-8 20 43.3 38.1 29.47 22.86 PCN11-032P-2.54BP-2 583-1134-0 32 58.54 53.34 44.71 38.1 PCN11-044P-2.54BP-2 583-1135-3 44 73.78 68.58 59.95 53.34 PCN11-050P-2.54BP-2 583-1136-6 50 81.4 76.2 67.57 60.96 PCN11-064P-2.54BP-2 583-1137-9 64 85.35 78.74 PCN11-090P-2.54BP-2 583-1138-1 90 132.2 127 118.37 111.76 PCN11-100P-2.54BP-2 583-1140-3 100 144.9 139.7 131.07 124.46 99.18 93.98 C ●Housing (Without mounting hole) PCN11A-*P-2.54BP-2 Unit:mm Part Number A96 CL No. Number of Contacts A PCN11A-10P-2.54BP-2 583-1141-6 10 19.4 16.77 B 10.16 C PCN11A-16P-2.54BP-2 583-1142-9 16 27.02 24.39 17.78 PCN11A-20P-2.54BP-2 583-1143-1 20 32.1 29.47 22.86 PCN11A-32P-2.54BP-2 583-1144-4 32 47.34 44.71 38.1 PCN11A-44P-2.54BP-2 583-1145-7 44 62.58 59.95 53.34 PCN11A-50P-2.54BP-2 583-1146-0 50 70.2 67.57 60.96 PCN11A-64P-2.54BP-2 583-1147-2 64 87.98 85.35 78.74 PCN11A-90P-2.54BP-2 583-1148-5 90 121 118.37 111.76 PCN11A-100P-2.54BP-2 583-1150-7 100 133.7 131.07 124.46 D ■Receptacle: 3 Row Short Type PCN11-96S-2.54PFB-2 CL583-1118-4 BPCB mounting pattern ■Receptacle: 3 Row Wrapping Backplane Type PCN11-96S-2.54WB-2 CL583-1085-7 BPCB mounting pattern A97 ■Receptacle: 3 Row Backplane Type (t=2.45 board) ●Housing (With Mounting hole) PCN11-96P-2.54BP-2 CL583-1139-4 ●Housing (Without mounting hole) PCN11A-96P-2.54BP-2 CL583-1149-8 A98 ■Receptacle: 4 Row Short Type PCN11-128S-2.54PFB-2 CL583-1119-7 BPCB mounting pattern ■Receptacle: 4 Row Wrapping Backplane Type PCN11-128S-2.54WB-2 CL583-1086-0 BPCB mounting pattern A99 ■ Receptacle: 3 Row Backplane Type (t=2.45 board) ●Housing Without mounting hole PCN11A-128P-2.54H-2 CL583-1151-0 A100 BApplication ' ●2-row type Mounting hole center C.L. Center line ●3 Row Type ●4-row type For other combination application patterns, refer to the PCN10 Series catalog. A101 BRecommendation for Press fit Board Assembly If boards are furnished from the users, HIROSE will assemble the connectors. Please confirm following requirements. 1Board size: 600 x 600mm max. 2Board through-hole pitch The board punching bench is designed in the 2.54mm pitch grid. Set the through-hole pitch to pitch (connector side) size to 2.54 x n. 3Connector punching surface indication For indication on the connector punching surface, mark "FRONT" or "F", and "BACK" or "B" on the reverse side in order to clearly identify the front and rear sides. In addition, the punching direction should be clearly marked. 4Clearly indicate the board No. and marking position. 5Clearly indicate board mounting hole positions and hole diameters. In addition, we provide the press fit board assembly from the both sides, For further information, consult HRS company. BAssembly Drawing ●PCN11 A102 BAssembly Drawing ●PCN11 Socket Type · Combination with PCN10, 12 and 13 can be selected alternatively. · In connection with the backplane, various assemblies are available. (2.4mm thickness board) Plug-Right Angle PCN12(A)-*P-2.54DS 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100(12A) 3-row: 96(12, 12A) 4-row: PCN 10(A)-128P-2.54DS Socket- Right Angle PCN10C-*S-2.54DS (double-sided 2-points contacts) PCN13-*S-2.54DS (single-sided 2-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 (16 for PCN13 only) 3-row: PCN10A(B)-96S-2.54DS PCN13(B)-96S-2.54DS 4-row: PCN10B-128S-2.54DS Plug-Straight PCN10-*S-2.54DSA 2-row: 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 Socket-Straight Cable Type Crimp(AWG22 to 30) PCN10-*S-2.54DSA 2-row: 20, 50, 64 3-row: 96 IDC(AWG28) PCN10-64S-2.54R 3-row 96 contact type without row b PCN11-*S-2.54PFB-2 (double-sided 2-points contacts) PCN12-*S-2.54DSA PCN13-*S-2.54DSA (single-sided 2-point contact) 2-row: 10, 16, 20, 32, 44, 50, 64, 90, 100 3-row: 96 4-row: 128 (PCN11, 13) ] For connector mating sizes, refer to the application pattern. A103 ■Recommended Press fit Through-hole (2) Ø0.9 (1) Ø0.8 Drill dia. Ø0.9±0.025 Finish dia. Ø0.8±0.08 (3) Ø1.0 Drill dia. Ø1.0±0.025 Finish dia. Ø0.9±0.08 Drill dia. Ø1.1±0.025 Finish dia. Ø1.0±0.08 Copper plating 20µm min. Copper plating 20µm min. Copper plating 20µm min. Solder plating 5 to 10µm Solder plating 5 to 10µm Solder plating 5 to 10µm ■Applicable Board Material and Board Thickness ●t=2.4mm (Board thickness tolerance: ±0.2mm) ●Material: FR-4, G-10, polyamid BPress fit machine ●Features ●By changing the board bed and punch tooling, various connectors can be press fitted. ●The easy height adjustment mechanism allows to obtain a proper pressure height to the board thickness. ●By programming the pre-inserted connector, continuous press-insertion services can proceed. A104 Mechanical size (Width) 1330 x (depth) 1600 x (height) 2000mm Weight 1000kg approx. Drive source 200V AC Air supply source: normally 5kg/cm2 Press pressure source Hydraulic output :5t max. Board size 600 x 800 mm max. BPress fit Repair Tool The following tools are used to repair the press fit connector housing and contact. ●Tool to Remove Housing This tool is used to remove the connector from the board. Part Number PCN11-*S-HP Applicable Product PCN11-*S-2.54PFB-2 PCN11-*S-2.54WB-2 *indicates the number of contacts. ●Tool to Remove Contact After the housing is removed from the board, this tool is used to remove every contact from the board. Part Number Applicable Product PCN11S-PFB-2-CP PCN11-*S-2.54PFB-2 PCN11S-WB-2-CP PCN11-*S-2.54WB-2 *indicates the number of contacts. A105