AVAGO HSMW-A100-T50J1 White surface mount led indicator smt plcc-2 Datasheet

HSMW-A10x-xxxxx
White Surface Mount LED Indicator
SMT PLCC-2
Data Sheet
Description
Features
This family of SMT LEDs is packaged in the industry
standard PLCC-2 package. These SMT LEDs have high
reliability performance and are designed to work under
a wide range of environmental conditions. This high
reliability feature makes them ideally suited to be used
under harsh interior automotive as well as interior signs
application conditions.
• Industry standard PLCC-2 package (plastic leaded
chip carrier)
• Super high reliability LED package
To facilitate easy pick & place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
shipped in single intensity and color bin.
These LEDs are compatible with IR solder reflow
process.
The super wide viewing angle at 120° makes these
LEDs ideally suited for panel, push button, or general
backlighting in automotive interior, office quipment,
industrial equipment, and home appliances. The flat top
emitting surface makes it easy for these LEDs to mate
with light pipes. With the built-in reflector pushing up
the intensity of the light output, these LEDs are also
suitable to be used as LED pixels in interior electronic
signs.
• Tight white color binning
• Super wide viewing angle at 120˚
• Available in 8 mm carrier tape on 7-inch reel (2000
pieces)
• Compatible with IR and TTW soldering process
Applications
• Interior automotive
– Instrument panel backlighting
– Central console backlighting
– Cabin backlighting
• Office automation, home appliances, industrial
equipment
– Front panel backlighting
– Push button backlighting
– Display backlighting
The super high brightness white PLCC-2 SMT LED is
ideal for all kinds of backlighting applications in interior
automotive, office automation, electrical appliance
and industrial instrument markets to offer a clear and
attractive product differentiation. The wide viewing
angle at 120˚also enables this white PLCC-2 SMT LED
to be used in localised area ambience lighting in
applications such as vanity mirror light, cabin light, and
car door puddle light. The white color backlighting offered by this series of white PLCC-2 SMT LED is suitable to
backlight color LCD screen in applications such as GPS
(global positioning system) screens in cars.
CAUTION: HSMW-A10x LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during
handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
Package Dimensions
2.80
(0.110)
1.90
(0.073)
0.05
(0.002)
2.20
(0.087)
0.80
(0.031)
3.50
(0.138)
3.20
(0.126)
0.80
(0.031)
CATHODE MARKING
NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES).
Device Selection Guide
Color
Part Number
Min. IV (mcd)
Typ. IV (mcd)
Max. IV (mcd)
Test Current (mA)
Dice Technology
White
HSMW-A101-R50J1
100.00
-
395.00
20
InGaN
HSMW-A100-T50J1
250.00
-
1000.00
20
InGaN
Note:
1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
Part Numbering System
HSM x1 –A x2 x3x4 - x5x6 x7 x8x9
Packaging 0ption
Color Bin Selection
Intensity Bin Select
Device Specific Configuration
Package Type
LED Chip Color
Absolute Maximum Ratings (TA = 25°C)
Parameters
HSMW
DC Forward Current[1]
30 mA
Peak Forward Current[2]
90 mA
Power Dissipation
114 mW
Reverse Voltage
5V
Junction Temperature
110°C
Operating Temperature
–40°C to +100°C
Storage Temperature
–40°C to +100°C
Notes:
1. Derate linearly as shown in Figure 4.
2. Duty factor = 10%, frequency = 1 kHz.
Optical Characteristics (TA = 25°C)
Typ. Chromaticity
Viewing Angle
Dice
Coordinates[1]
2q1/2[2] (Degrees)
Luminous
Efficacy, hV[3]
(lm/W)
Luminous Intensity/
Total Flux
IV (mcd)/FV (lm)
Color
Part Number
Technology
x
y
Typ.
Typ.
Typ.
White
HSMW-A10x
InGaN
0.31
0.31
120
260
0.45
Notes:
1. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device.
2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/watt.
Electrical Characteristics (TA = 25°C)
Part
Number
Forward Voltage, VF (Volts) @ IF = 20 mA
Typ.
Max.
Reverse Voltage, VR @ 10 µA
Min.
Thermal Resistance
RθJP (°C/W)
HSMW
3.4
5
280
4.05
1.6
35
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
FORWARD CURRENT - mA
30
25
20
15
10
5
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
4.0
0
5
Figure 1. Forward Current vs. forward voltage
25
30
35
35
5 mA
0.015
30
25
10 mA
0.010
CURRENT - mA
Y-COORDINATES
20
Figure 2. Relative intensity vs. forward current.
0.020
0.005
20 mA
0
-0.005
20
15
10
5
30 mA
-0.010
-0.003 -0.002 -0.001
0
0.001
0.002
0
0.003
0
Figure 3. Chromaticity shift vs. currrent.
Note: (x,y) values @ 20 mA reference to (0.0)
0.8
0.6
0.4
0.2
0
10
20
30
40
ANGULAR DISPLACEMENT - DEGREES
Figure 5. Radiation pattern.
40
60
80
100
120
Figure 4. Maximum forward current vs. ambient
temperature. Derated based on TJMAX = 110°C, RqJA =
500°C/W.
1.0
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
20
TEMPERATURE - °C
X-COORDINATES
NORMALIZED INTENSITY
15
DC FORWARD CURRENT - mA
FORWARD VOLTAGE - V
10
50
60
70
80 90
10 to 20 SEC.
255 °C
TEMPERATURE
217 °C
20 SEC. MAX.
TEMPERATURE
240°C MAX.
3°C/SEC. MAX.
100-150°C
183°C
+5 °C
-0 °C
3 °C/SEC. MAX.
125 °C ± 25 °C
6 °C/SEC. MAX.
MAX. 120 SEC.
60 to 150 SEC.
Ð6°C/SEC.
MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
60-150 SEC.
* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.
TIME
Figure 6a. Recommended SnPb reflow soldering profile.
Figure 6b. Recommended Pb-free reflow soldering profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
TURBULENT WAVE
TEMPERATURE Ð °C
250
HOT AIR KNIFE
BOTTOM SIDE
OF PC BOARD
200
4.50
LAMINAR WAVE
1.50
TOP SIDE
OF PC BOARD
150
FLUXING
100
2.60
50
30
0
PREHEAT
0
10
20
30
40 6 50
0
70
80
90
100
TIME Ð SECONDS
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150°C (100°C PCB)
SOLDER WAVE TEMPERATURE = 245°C
AIR KNIFE TEMPERATURE = 390°C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40°
SOLDER: SN63; FLUX: RMA
NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY
COOLED BEFORE EXERTING MECHANICAL FORCE.
Figure 7. Recommended wave soldering profile.
SOLDER RESIST
Figure 8. Recommended soldering pad pattern.
TRAILER
COMPONENT
200 mm MIN. FOR 180 REEL.
200 mm MIN. FOR 330 REEL.
LEADER
480 mm MIN. FOR 180 REEL.
960 mm MIN. FOR 330 REEL.
C
A
USER FEED DIRECTION
Figure 9. Tape leader and trailer dimension.
4 ± 0.1
4 ± 0.1
2 ± 0.05
2.29 ± 0.1
1.75 ± 0.1
+0.1
1.5 -0
C
3.5 ± 0.05
+0.3
8 - 0.1
3.81 ± 0.1
A
3.05 ± 0.1
+0.1
1- 0
8°
0.229 ± 0.01
Figure 10. Tape dimension.
∅ 20.5 ± 0.3
2 +0.5
-0
62.5
180
+0
- 2.5
∅ 13 ± 0.2
8.4
+1.50
(MEASURED AT OUTER EDGE)
- 0.00
14.4 (MAX. MEASURED AT HUB)
LABEL AREA (111 mm x 57 mm)
WITH DEPRESSION (0.25 mm)
7.9 (MIN.)
10.9 (MAX.)
Figure 11. Reel dimensions.
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 12. Reeling orientation.
Moisture Sensitivity
- The LEDs must be kept at <30°C / 60%RH at all time
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
This product is qualified as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
C. Control for unfinished reel
A. Storage before use
D. Control of assembled boards
- Unopen moisture barrier bag (MBB) can be stored
at <40°C/90%RH for 12 months. If the actual shelf
life has exceeded 12 months and the HIC indicates
that baking is not required, then it is safe to reflow
the LEDs per the original MSL rating.
- It is not recommended to open the MBB prior to
assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
- For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
- If the PCB soldered with the LEDs is to be subjected
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their floor life of 672 hours.
E. Baking is required if:
- “10%” or “15%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60%
RH at any time.
- The LEDs floor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
Intensity Bin Select (X5X6)
Color Bin Limits
Individual reel will contain parts
from one half bin only.
X5
Min Iv Bin
Bin ID
A
x
y
B
x
y
C
x
y
D
x
y
E
x
y
F
x
y
X6
0
3
4
5
7
8
9
Full Distribution
3 half bins starting from X51
4 half bins starting from X51
5 half bins starting from X51
3 half bins starting from X52
4 half bins starting from X52
5 half bins starting from X52
Limits (Chromaticity Coordinates)
0.352
0.365
0.365
0.377
0.395
0.360
0.340
0.352
0.352
0.360
0.377
0.341
0.327
0.340
0.340
0.342
0.360
0.325
0.315
0.327
0.327
0.325
0.342
0.306
0.302
0.315
0.315
0.307
0.325
0.290
0.290
0.302
0.302
0.290
0.307
0.271
0.352
0.341
0.340
0.325
0.327
0.306
0.315
0.290
0.302
0.271
0.290
0.255
Note: Tolerance for each bin limit = ± 0.02.
Intensity Bin Limits
Min. (mcd)
71.50
90.00
112.50
140.00
180.00
224.00
285.00
355.00
450.00
560.00
715.00
900.00
Max. (mcd)
90.00
112.50
140.00
180.00
224.00
285.00
355.00
450.00
560.00
715.00
900.00
1125.00
Tolerance of each bin limit = ± 12%.
Individual reel will contain parts
from one full bin only.
X7
0
Full Distribution
Z
A and B only
Y
B and C only
W
C and D only
V
D and E only
U
E and F only
Q
A, B and C only
P
B, C and D only
N
C, D and E only
M
D, E and F only
1
A, B, C and D only
3
B, C, D and E only
4
C, D, E and F only
5
A, B, C, D and E only
6
B, C, D, E and F only
For product information and a complete list of distributors, please go to our website:
A
Y-COORDINATE
Bin ID
Q1
Q2
R1
R2
S1
S2
T1
T2
U1
U2
V1
V2
0.40
Color Bin Select (X7)
B
0.35
C
D
0.30
E
F
0.25
0.25
0.30
0.35
0.40
X-COORDINATE
Figure 14.
Packaging Option (X8X9)
Option
Test
Current
J1
20 mA
Package
Type
Top
Mount
Reel Size
7 inch
J2
10 mA
Top
Mount
7 inch
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0645EN
AV02-0490EN - June 19, 2007
Similar pages