Fujitsu FBR244ND01202CE-2-UL Miniature relay 2 poles-1 to 2 a (for signal switching) Datasheet

FUJITSU TAKAMISAWA
COMPONENT CATALOG
MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR244 SERIES
■ FEATURES
●
●
●
●
●
Gold-overlay bifurcated contact
Contact material and shape especially suitable for signal
switching; assures reliability at low level switching.
Conforms to FCC68 standards
High voltage relays are also available with dielectric
strength greater than 1,000 VAC and surge strength
greater than 1,500 V.
Formed terminals for temporary mounting
Kink terminals enable FBR240 Series relays to be mounted
temporarily on a PC board.
Automatic mounting
Shipped in carrier case plastic magazine suitable for automatic mounting.
UL and CSA recognized
NO
TF
DE
■ ORDERING INFORMATION
[Example]
FBR244 N
(a)
(b)
D
(c)
012 / 02C
(d)
(e)
OR
NE
GN
W
S
SI
S
(f )
-2 -CSA
(g)
(h)
(a)
Series Name
FBR244: FBR244 Series
(b)
Enclosure
(c)
Coil Type
(d)
Nominal Voltage
(Example) Standard
(Example) G type
003: 3 VDC
005: 4.5 VDC
012: 12 VDC
009: 9 VDC
(refer to the COIL DATA CHART)
(e)
Contact Arrangement
02C : 2 form C (DPDT)
(f)
Contact Style and Contact Material
T
E
S
P
: Bifurcated, gold-overlay silver contact
: Bifurcated, gold-overlay silver-palladium contact
: Single, gold-overlay silver contact
: Single, gold-overlay silver-palladium contact
(g)
Special Type
Nil
-2
: Standard
: High dielectric strength type
(h)
Safety Specification
Nil : Standard
-UL : UL114 recognized
-CSA : UL114 + CSA recognized
Nil
N
: Flux free type
: Plastic sealed type
D
G
: Standard (nominal power 0.5 W type)
: G type (nominal power 0.55 W type)
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR244D012/02CE
Stamp: 244D012/02CE
1
FBR244 SERIES
■ SAFETY STANDARD AND FILE NUMBERS
UL114 (File No. E63615)
C22.2 No. 14 (File No. LR40304 or LR64026)
Nominal voltage
Contact rating
2 A 28 VDC resistive
0.5 A 120 VAC resistive
3 to 48 VDC
■ SPECIFICATIONS
Item
Contact
S contact
Arrangement
2 form C (DPDT)
Style
Single
Material
Gold-overlay
silver
Resistance (initial)
Maximum 100 mΩ (at 0.1 A 6 VDC)
NO
Ratings
TF
2A
Maximum Switching Power
60 AV or 30 W
Voltage*1
Gold-overlay
silver-palladium
Gold-overlay
silver
Gold-overlay
silver-palladium
OR
220 VAC or 150 VDC
Maximum Switching Current
1.25 A (AC) or 2 A (DC)
Min. applicable
Plastic sealed
load*2 (Reference)
Flux free
1 mA 5 VDC
1 mA 1 VDC
1 mA 1 VDC
0.1 mA 0.1 VDC
5 mA 5 VDC
1 mA 5 VDC
1 mA 5 VDC
1 mA 1 VDC
Nominal Power (at 20°C)
Approximately 0.5 W to 0.58 W (standard), approximately 0.55 W (G type)
DE
Operating Temperature
Operating Humidity
NE
GN
W
S
SI
Approximately 0.28 W (standard), approximately 0.25 W (G type)
–30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)
45 to 85%RH
Operate (at nominal voltage)
Release (at nominal voltage)
Insulation
E contact
0.5 A 120 VAC or 1 A 30 VDC (resistive load)
Operate Power (at 20°C)
Time Value
T contact
Bifurcated
Maximum Carrying Current
Max. Switching
Coil
P contact
Maximum 6 ms
Maximum 3 ms
Resistance (initial)
Minimum 100 MΩ (at 500 VDC)
Dielectric
Strength
Between coil and contacts
500 VAC 1 minute (standard)
1,000 VAC 1 minute (high dielectric strength type)
Between open contacts
500 VAC 1 minute
Surge Strength
1,500 V (at 10 × 700 µs)
Mechanical
20 ×
Electrical (refer to the
REFERENCE DATA)
DC
AC
1,500 V
750 V
10 µs
Life
Other
106
operations minimum
500 ×
103
operations minimum (at contact rating)
100 ×
103
operations minimum (at contact rating)
Vibration Resistance
10 to 55 Hz (double amplitude of 1.5 mm)
Shock
Resistance
Misoperation
200 m/s2 (11 ±1 ms)
Endurance
1,000 m/s2 (11 ±1 ms)
Weight
700 µs
Approximately 4.5 g
1
* If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load.
*2 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum switching load varies with the switching frequency and operation environment.
2
FBR244 SERIES
■ COIL DATA CHART
1. STANDARD (D type)
MODEL
Nominal
Coil
current
resistance (at nominal
±10%
voltage)
approx.
Nominal
voltage
■ S, P, T, E
Must
operate
voltage
Must
release
voltage
Nominal
power
Operate
power
Coil
temperature
rise
Flux free
Plastic sealed
FBR244D003/02■
■
FBR244ND003/02■
■
3 VDC
18 Ω
167 mA
FBR244D005/02■
■
FBR244ND005/02■
■
5 VDC
50 Ω
100 mA
FBR244D006/02■
■
FBR244ND006/02■
■
6 VDC
72 Ω
FBR244D009/02■
■
FBR244ND009/02■
■
9 VDC
162 Ω
75% max. 10% min. Approx.
Approx.
Approx.
of
of
500 mW 280 mW
45 deg
83 mA
nominal nominal (at nominal
max.
(at nominal
voltage
voltage
voltage)
voltage)
56 mA
FBR244D012/02■
■
FBR244ND012/02■
■
12 VDC
290 Ω
41 mA
FBR244ND024/02■
■
24 VDC
1,150 Ω
21 mA
FBR244ND048/02■
■
48 VDC
4,000 Ω
12 mA
NO
FBR244D024/02■
■
FBR244D048/02■
■
580 mW
53 deg
Note: All values in the table are measured at 20°C.
MODEL
■ S, P, T, E
TF
Nominal
Coil
current
resistance (at nominal
±10%
voltage)
approx.
Nominal
voltage
DE
Flux free
Plastic sealed
FBR244G005/02■
■
FBR244NG005/02■
■
4.5 VDC
36 Ω
FBR244G006/02■
■
FBR244NG006/02■
■
6 VDC
66 Ω
FBR244G009/02■
■
FBR244NG009/02■
■
9 VDC
140 Ω
FBR244G012/02■
■
FBR244NG012/02■
■
12 VDC
280 Ω
FBR244G024/02■
■
FBR244NG024/02■
■
24 VDC
1,050 Ω
FBR244G048/02■
■
FBR244NG048/02■
■
48 VDC
4,100 Ω
■ CHARACTERISTIC DATA
Range of operation temperature and voltage
[Standard 0.5 W type]
Nominal voltage multiplying factor (%)
1.8
(Data) assumes that the
maximum allowable
temperature of E type
insulation coil is
115˚C
Max
imu
m
coil allowa
volt ble
age
0A
1.6
1A
1.4
1.2
1.0
0.8
0.6
Operating voltage range
ge
ate volta
Must oper
Nominal
power
Operate
power
91 mA
4.0 VDC 0.27 VDC
Approx.
Approx.
Approx.
50 deg
550 mW 250 mW
(at nominal
43 mA
8.1 VDC 0.55 VDC (at nominal max.
voltage)
voltage)
23 mA 15.8 VDC 1.06 VDC
64 mA
6.0 VDC 0.38 VDC
11 mA 30.5 VDC 2.12 VDC
2.0
1.8
1.6
1.4
(Data) assumes
that the maximum
allowable temperatu
of E type insulation
coil is 115˚C
0A
1A
Ma
xim
um
allo
wab
1.2
1.0
le c
Operating voltage range
oil v
olta
ge
0.8
0.6
Operate time
20
10
5
including bounce
time
3
2
1
not including
bounce time
ate voltage
Must oper
0.5
0 10 20 30 40 50 60 70
Operating temperature (˚C)
Coil
temperature
rise
3.1 VDC 0.20 VDC
Range of operation temperature and voltage
[G type 0.55 W type]
Nominal voltage multiplying factor (%)
2.0
Must
release
voltage
NE
GN
W
S
SI
Note: All values in the table are measured at 20°C.
OR
125 mA
Must
operate
voltage
Time (ms)
2. G TYPE
0 10 20 30 40 50 60 70
Operating temperature (˚C)
0.2 0.4 0.6 0.8 1.0 1.2
Coil power (W)
3
FBR244 SERIES
Release time
5
3
2
not including
bounce time
1
0.5
➀AC resistive load
( AC contact rating)
➁DC resistive load
( DC contact rating)
➁
2.0
➀
1.0
➀
➁
0.5
0.3
0.2
(x104 )
500
Service life (operations)
including bounce
time
Contact load current (A)
Time (ms)
10
Life curve
Maximum switching capacity
20
28 V DC resistive load
100
50
120 V AC
resistive load
10
5
1
0.1
0.2 0.4 0.6 0.8 1.0 1.2
Coil power (W)
0.5
NO
1.0
1.5
2.0
Contact load current (A)
10 20 30 50 100 150 220
Contact load voltage (V)
■ REFERENCE DATA
Distribution of operate and release time
Distribution of operate and release voltage
30
80
DE
20
10
0
0 10 20 30 40 50 60 70 80
Rated coil voltage multiplying factor (%)
■ DIMENSIONS
●Dimensions
9.6+0.2
3.5
80
OR
60
40
60
40
NE
SI
GN
W
S
20
0
0 1
2
3 4 5
Time (ms)
6
7
8
●Schematic
(BOTTOM VIEW)
20
0
0 10 20 30 40 50 60 70 80
Contact resistance (mΩ)
●PC board mounting hole
layout (BOTTOM VIEW)
8–ø0.8
10.0+0.3
20.0+0.2
Operate
Release
1
4
16
13 11 9
6
8
7.62
Distribution (%)
40
TF
100
Distribution (%)
Operate
Release
50
Distribution of contact resistance
100
Distribution (%)
60
*
(1.0)
7.62
5.08 5.08 (0.99)
7.62
7.62
5.08
5.08
*:The terminals marked with an asterisk are kinked for temporary mounting on PC board.
●Tube carrier
520 maximum
19.8 maximum
12.8 max.
25 pieces/tube
Unit: mm
4
FBR244 SERIES
Fujitsu Takamisawa
International
Headquarter
Offices
www.fujitsu.takamisawa.com
Japan
Fujitsu Takamisawa Component Limited
Global Marketing and Sales
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
North and South America
Fujitsu Takamisawa America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Europe
Fujitsu Takamisawa Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Asia Pacific
Fujitsu Takamisawa Asia Pacific Pte. Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
NO
TF
DE
OR
NE
GN
W
S
SI
5
Similar pages