Dubilier DBCHJ0695M-4TM Audio pcb 6.4 headphone jack Datasheet

AUDIO
PCB 6.4 Ø HEADPHONE JACK
SECTION 6
Competitively priced
Industry Compatible
PCB Mounting
Available in plastic or metal bushing
SPECIFICATION
Contact resistance (DCR 0.1A)
1, Initial, before any testing:
2, After life test with mating plug:
Insertation Force:
Extraction Force:
Soldering Heat:
Operating Temperature range:
Insulating Resistance:
Voltage Test:
Lifetime:
Rated Voltage:
Rated Current:
(1) Between the terminals (NC): 30mΩ
(2) Plug to sleeve, tip ,ring (NO) contact: 50mΩ
(1) Between the terminals (NC): 60mΩ
(2) Plug to sleeve, tip, ring (NO) contact: 100mΩ
0.3kg - 3.0kg
Terminals must withstand a 500g minimum pull for 10 seconds
0.3kg - 3.0kg
before movement or break from housing occurs
Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds
-25˚C to 100˚C
More than 100MΩ by 500v DC at 90 - 95% RH, 40˚C
Withstand 0.5mA 500v AC between any open terminal for one minute
Withstand more than 5000 cycle’s insertion and withdrawal with testing plug
16vdc
20mA - 0.3A
OUTLINE DRAWING
ORDERING INFORMATION
DBC
HJ
0695
Dubilier
Connectors
6.4Ø Earphone
Socket
Connector
Series
-2T
Bushing
Contacts
Blank = Plastic
M = Metal
-2T
-3RT
-3TS
-4R
-4TC
-4TM
--5
152
Fax: 01371 875075
www.dubilier.co.uk
Tel: 01371 875758
Similar pages