JDS FBE-SM2-C Fiber inspection and cleaning kit Datasheet

COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Fiber Inspection and Cleaning Kits
Key Features
• Complete solution for inspecting and cleaning
fiber connectors in a single kit
• Easily inspect and clean both sides of fiber connections
• Crisp, clear fiber end face images for detailed visual
inspection of contamination
• Portable, handheld probe and display
• Highly effective cleaning tools
• Precision inspection tips for different connectors
and applications
• Compact carrying case for portability and organization
Applications
• Easily inspects both sides
(bulkhead and patch cord) of a fiber
connection
Dirt, dust, and other particles on fiber end faces are the primary causes of
troubleshooting in optical networks. In addition, most field test failures can be
attributed to dirty connectors. JDSU Fiber Inspection and Cleaning Kits enable
quick and easy visual inspection to determine whether fiber connectors are truly
clean before they are mated. Proactively inspecting and cleaning fiber connectors,
enables technicians to reduce network troubleshooting and downtime, optimizes
signal performance, and prevents network damage.
JDSU provides the industry’s most complete solution for inspecting and cleaning
fiber connectors with a combination of all the necessary equipment that
technicians need to ensure the integrity of optical connections. These convenient
kits address the vast array of inspection and cleaning needs in today’s field
applications.
• Provides a quick and easy cleaning
solution for end face contaminants
• Effectively remove stubborn
contaminants with cleaning solvent
WEBSITE : www.jdsu.com/test
For inspection, each kit comes equipped with a probe microscope, a portable
handheld HD3 video display, and eight precision inspection tips for various
bulkhead and patch cord configurations. For cleaning, each kit includes two
bulkhead/patch cord cleaning tools, connector cleaning solvent, and lint-free
wipes. All contents are provided in a compact and secure carrying case, providing
a safe, portable, and convenient solution for fiber technicians.
FIBER INSPECTION AND CLEANING KITS
2
Kit Components
Fiber Inspection
The JDSU video fiber inspection probe and handheld display system is used to
inspect both “male” (patch cord) and “female” (bulkhead) sides of a fiber
interconnect. Both the probe and display fit comfortably in a users’ hand for
portability and easy operation. Various interchangeable tips enable optimized
inspection for different connector types and applications.
The FBP series probe provides dual (200x and 400x) magnification and a selection
of over 350 different inspection tips. FBE series probes provide a more economical
option with single magnification (200x or 400x) and a selection of common tip
configurations. Both configurations are hardwired with a compact HD3 series
display, which includes a 1.8-inch TFT LCD to provide a portable inspection
solution for fiber technicians.
FBE Probe
FBP Probe
FBET Inspection Tip
FBET-SC
FBPT Inspection tip
and Barrel Assembly
Focus Control
Recirculating focus wheel adjusts
focus on the display screen
AC Power/Charger Input
Alternative AC power and battery charger input
Focus Control
Adjust focus on the
display screen
Magnification Control
Switch between low & high
magnification
HD3 Display
Probe Input
4-pin FBP Probe Input for stand-alone display
Low Battery Indicator
When lit, remaining battery life = 30 minutes
Accessory Connection
1.8”TFT LCD Screen
Power Mode Selector
· ON mode for continuous ON
· GripSwitch Mode designed to
save battery life
· Off/Charge Mode to turn
power OFF or to CHARGE
battery
GripSwitch™
Press both sides to turn power ON and release
to turn power OFF
Hex Screw
Remove to access battery
compartment
Microscope
Display
Compatability
Patchcord Inspection Tips
Bulkhead Inspection Tips
Portable Cleaning Tool: Bulkhead/Patch Cord - 2.5 mm
Portable Cleaning Tool: Bulkhead/Patch Cord - 1.25 mm
Cleaning Solvent
Cleaning Wipes
Carrying Case
FBE-SM1-C/FBE-SM2-C
FBP-SM03-C
FBE
HD3
FBET Series (~30)
Universal 1.25 mm
Universal 2.5 mm
Universal 2.5 mm APC
SC, LC, FC, ST, SC/APC
Yes
Yes
Yes
Yes
Yes
FBP
HD3
FBPT Series (350+)
Universal 1.25 mm
Universal 2.5 mm
Universal 2.5 mm APC
SC, LC, FC, ST, SC/APC
Yes
Yes
Yes
Yes
Yes
FIBER INSPECTION AND CLEANING KITS
3
Fiber Cleaning Tools
IBC™ brand cleaners are dry cloth cleaners specifically designed to clean either
side of a fiber connection. For cleaning connectors behind a bulkhead, simply
insert the device into the bulkhead until a click sound is heard. For cleaning
patch cords, the dust cap acts as an adapter to receive the connector ferrule.
These tools are simple to use and highly effective at removing oil and dust
contaminants.
Optical-grade cleaning solvent and lint-free wipes
remove stubborn contaminants
FCC2™ optical-grade solvent is designed specifically for cleaning optical
connectors. Electrically conductive, this solvent is ideal and effective at removing
stubborn forms of debris by dissipating static charges that bind particulate to
connector end faces. Ideal for wet-to-dry cleaning procedures, this fast-drying
solvent is nonflammable, nontoxic, noncorrosive, and safe to use.
IBC Cleaner (1.25 mm)
IBC Connector cleaner (Universal 2.5 mm)
Specifications
FBE Probe
Inspection Tip Compatibility
Dimensions
Detection w/ HD3 display
Low Mag (HFOV)
High Mag (HFOV)
Weight
Cord Length
Camera Type
Light Source
Lighting Technique
Power Source
FBET Series tips
12.5 x 3.3 x 3.2 cm
(5 x 1.32 x 1.28 in)
<1 µm
550 µm
350 µm
180 g (6.35 oz)
240 cm (7.87 ft) coil
1/3” CMOS Sensor
Blue LED, 100,000+ hour life
Coaxial
From HD3 display
Detection w/ HD3 display
Low Mag (HFOV)
High Mag (HFOV)
Weight
Cord Length
Camera Type
Light Source
Lighting Technique
Power Source
Cleaning Solvent
Dimensions
Technical Details
Chemical Family
HFC solvent
Appearance
Clear, colorless liquid
Odor
Slight, ethereal
Boiling Point
45°C / 113°F
Solvency & Cleaning Data
Vapor Pressure (mmHg @ 20°C)
310
Percent Volatile
100%
Specific Gravity
1.34
pH
Neutral
Health, Safety & Environmental Data
Toxicity
ppm, 8-Hr TWA, PEL See MSDS
Flashpoint (TCC)
None
Flammability
Nonflammable
NFPA
Health: 1; Fire 0; Reactivity: 1
Ozone Impact
Zero
RoHS and WEEE Compliant
Yes
SNAP Approved
Yes
Safe for Travel
Yes
10 x 7 x 4.3 cm
(3.9 x 2.8 x 1.7 in)
Weight
150 g (5 oz) w/ Hanging accy
Screen Size
4.6 cm (1.8 in)
Power Source
Built-in rechargeable NiMH
(nickel metal hydride), 800 mAH battery of AC adapter
(100-200 VAC/12 VDC)
Power Mode
ON (continuous on)
ON/GRIP (GripSwitch power save mode)
OFF/CHARGE (power off or charge)
Portable Cleaning Tools
Compatibility
FBP Probe
Inspection Tip Compatibility
Dimensions
HD3 Display
FBPT Series tips
14.0 x 4.6 x 4.4 cm
(5.5 x 1.8 x 1.7 in)
<1 µm
550 µm
350 µm
180 g (6.35 oz)
240 cm (7.87 ft) coil
1/3” CMOS Sensor
Blue LED, 100,000+ hour life
Coaxial
From HD3 display
1.25 mm Version (LC, MU)
2.5 mm Version (SC, FC, ST)
Cleanings per unit
525+
Impact resistance:
Up to 6 feet
Operating Temperature Range
-10 to +60°C
(14 to 140°F)
Crush resistance
up to 20.4 kg (45 lbs)
Effective at removing:
Debris, dust, skin oil,
70% IPA residue, hand lotion, distilled water residue, salt residue
Lint-Free Cleaning Wipes
Material
Dimensions (in tub)
Quantity (per tub)
Soft, hydroentangled polyester fabric
5 x 10.80 cm (2 x 4.25 in)
90
FIBER INSPECTION AND CLEANING KITS
Ordering Information
Inspection and Cleaning Kits
FBE-SM1-C
FBE-SM2-C
FBP-SM03-C
Fiber Inspection and Cleaning Kit, 200X FBE probe, hardwired to HD3 display. Includes SC, LC, FC, ST, SC-APC, U25M,
U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), soft case, and
power supply/charger
Fiber Inspection and Cleaning Kit, 400X FBE probe, hardwired to HD3 display.Includes SC, LC, FC, ST, SC-APC, U25M,
U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), soft case, and
power supply/charger
Fiber Inspection and Cleaning Kit, 200X/400X FBP probe, hardwired to HD3 display. Includes SC, LC, FC, ST, SC-APC,
U25M, U25MA, and U12M tips, bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm), carrying case, and power
supply/charger
Accessories
Supplemental Cleaning Tools and Consumables
FCB-IBC12-10 Fiber cleaning tool, IBC, bulkhead and patch cord, 1.25 mm ferrules, 10-Pack
FCB-IBC25-10 Fiber cleaning tool, IBC, bulkhead and patch cord, 2.5 mm ferrules, 10-Pack
FCR-001
Fiber cleaning tool, CleanCheck, patch cord
FCR-CLN-01 Fiber Field Cleaning Consumables Kit
FCR-FCC-01
Fiber Cleaning Consumables (Solvent & Wipes) Bulk Refill Pack
Supplemental Inspection Tips and Adapters
FBPT-E2000 Tip, E2000 bulkhead, for FBP video fiber microscope
FBPT-FC
Tip, FC bulkhead, for FBP video fiber microscope
FBPT-LC
Tip, LC bulkhead, for FBP video fiber microscope
FBPT-LC-L
Tip, LC long reach for FBP video fiber microscope
FBPT-MTP
Tip, MTP/MPO multimode bulkhead, for FBP video fiber microscope
FBPT-MTPA
Tip, MTP/MPO single-mode bulkhead, for FBP video fiber microscope
FBPT-SC
Tip, SC bulkhead, for FBP video fiber microscope
FBPT-SC-APC Tip, SC-APC bulkhead, for FBP video fiber microscope
FBPT-SC-A6 Tip, SC bulkhead, for FBP video fiber microscope, angled 60°
FBPT-ST
Tip, ST bulkhead, for FBP video fiber microscope
FBPT-ST-A6
Tip, ST bulkhead, for FBP video fiber microscope, angled 60°
FBPT-U12M
Tip, universal 1.25 mm patch cord for FBP video fiber microscope
FBPT-U25M
Tip, universal 2.5 mm patch cord for FBP video fiber microscope
FBPT-U25MA Tip, universal 2.5 mm APC patch cord for FBP video fiber microscope
FBPT-UFMA Universal flare adapter, connects FMA adapters to FBP probe
* For additional information on tips and accessories not listed above, please contact a JDSU sales representative.
Test & Measurement Regional Sales
NORTH AMERICA
TOLL FREE : 1 866 228 3762
FAX : +1 301 353 9216
LATIN AMERICA
TEL : +55 11 5503 3800
FAX : +55 11 5505 1598
ASIA PACIFIC
TEL : +852 2892 0990
FAX : +852 2892 0770
Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation
EMEA
TEL : +49 7121 86 2222
FAX : +49 7121 86 1222
July 2008
www.jdsu.com/test
30149492 000 0708
CLEANKIT.DS.FOP.TM.AE
Similar pages