APTGT600DA60G Boost chopper Trench + Field Stop IGBT® Power Module VBUS VCES = 600V IC = 600A* @ Tc = 80°C Application • AC and DC motor control • Switched Mode Power Supplies • Power Factor Correction CR1 E2 0/VBUS VBUS 0/VBUS OUT E2 G2 Benefits • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat • Low profile • RoHS Compliant Absolute maximum ratings Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation RBSOA Reverse Bias Safe Operating Area TC = 25°C Max ratings 600 700 * 600 * 800 ±20 2300 Tj = 150°C 1200A @ 550V TC = 25°C TC = 80°C TC = 25°C Unit V A V W June, 2006 Q2 G2 * Specification of IGBT device but output current must be limited to 500A to not exceed a delta of temperature greater than 100°C for the connectors. These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-5 APTGT600DA60G – Rev 1 OUT Features • Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - M5 power connectors • High level of integration APTGT600DA60G All ratings @ Tj = 25°C unless otherwise specified ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter Saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, VCE = 600V Tj = 25°C VGE =15V IC = 600A Tj = 150°C VGE = VCE , IC = 2mA VGE = 20V, VCE = 0V Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Test Conditions VGE = 0V VCE = 25V f = 1MHz Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Eon Turn on Energy Eoff Turn off Energy Min Chopper diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM Maximum Reverse Leakage Current IF DC Forward Current VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions VR=600V IF = 600A VGE = 0V IF = 600A VR = 300V di/dt =5000A/µs Er 5.0 Inductive Switching (25°C) VGE = ±15V VBus = 300V IC = 600A R G = 2Ω Inductive Switching (150°C) VGE = ±15V VBus = 300V IC = 600A R G = 2Ω Tj = 25°C VGE = ±15V Tj = 150°C VBus = 300V IC = 600A Tj = 25°C R G = 2Ω Tj = 150°C Fall Time Tf Min Reverse Recovery Energy www.microsemi.com 1.4 1.5 5.8 Typ 49 3.1 1.5 130 55 250 Max Unit 750 1.8 µA 6.5 800 V nA Max Unit V nF ns 60 145 60 320 ns 80 3 5.5 17 21 Min 600 Tj = 25°C Tj = 150°C Tc = 80°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Typ Typ mJ mJ Max 350 550 600 1.5 1.4 120 210 27 57 6.9 14.1 Unit V µA A 1.9 V ns µC June, 2006 Symbol Characteristic mJ 2-5 APTGT600DA60G – Rev 1 Electrical Characteristics APTGT600DA60G Thermal and package characteristics Symbol Characteristic Min IGBT Diode RthJC Junction to Case Thermal Resistance VISOL TJ TSTG TC RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Torque Mounting torque Wt Package Weight To heatsink For terminals M6 M5 2500 -40 -40 -40 3 2 Typ Max 0.065 0.11 Unit °C/W V 175 125 100 5 3.5 280 °C N.m g June, 2006 SP6 Package outline (dimensions in mm) www.microsemi.com 3-5 APTGT600DA60G – Rev 1 See application note APT0601 - Mounting Instructions for SP6 Power Modules on www.microsemi.com APTGT600DA60G Typical Performance Curve Output Characteristics (VGE=15V) 1200 T J = 150°C TJ =25°C 1000 1000 VGE =13V VGE =19V TJ=125°C 800 800 T J=150°C IC (A) IC (A) Output Characteristics 1200 600 400 VGE =15V 600 VGE =9V 400 200 200 TJ=25°C 0 0 0 0.5 1 1.5 V CE (V) 2 0 2.5 40 T J=25°C 30 E (mJ) IC (A) 800 T J=125°C T J=25°C 200 25 3.5 Er 20 Eon 5 0 0 5 6 7 8 9 10 0 11 200 400 600 800 1000 1200 IC (A) V GE (V) Switching Energy Losses vs Gate Resistance Reverse Bias Safe Operating Area 1400 V CE = 300V V GE =15V I C = 600A T J = 150°C Eoff 1200 Eon 1000 IC (A) E (mJ) 3 Eoff 10 T J=150°C 30 2.5 15 400 40 1.5 2 V CE (V) VCE = 300V VGE = 15V RG = 1Ω T J = 150°C 35 1000 600 1 Energy losses vs Collector Current Transfert Characteristics 1200 0.5 20 10 800 600 400 Er V GE=15V T J=150°C RG=1Ω 200 Eon 0 0 0 1 2 3 4 5 Gate Resistance (ohms) 6 0 100 200 300 400 VCE (V) 500 600 700 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.9 0.05 0.7 0.04 0.5 0.03 IGBT June, 2006 0.06 0.3 0.02 0.01 0.1 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 Rectangular Pulse Duration in Seconds www.microsemi.com 4-5 APTGT600DA60G – Rev 1 Thermal Impedance (°C/W) 0.07 APTGT600DA60G Forward Characteristic of diode 1200 100 VCE=300V D=50% RG=1Ω TJ =150°C ZVS 80 ZCS 1000 800 Tc=85°C IF (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 120 60 600 T J=125°C 400 40 Hard switching 20 TJ=150°C T J=25°C 200 0 0 0 200 400 600 IC (A) 800 0 1000 0.4 0.8 1.2 V F (V) 1.6 2 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.12 0.1 0.08 Diode 0.9 0.7 0.06 0.5 0.04 0.3 0.02 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 5-5 APTGT600DA60G – Rev 1 June, 2006 Rectangular Pulse Duration in Seconds