Kingbright BLF052SURC-E-6V 5mm flange based led lamp Datasheet

5mm FLANGE BASED LED LAMP
BLF052SURC/E-6V
HYPER
RED
Features
Description
!BUILT-IN CURRENT LIMITING RESISTOR FOR DIRECT
The Hyper Red source color devices are made with DH
APPLICATION OF DIFFERENT ACROSS CURRENT.
InGaAlP on GaAs substrate Light Emitting Diode.
!LONG LIFE.
! LOW
CURRENT, POWER SAVINGS.
!LOW MAINTENANCE.
! DIFFERENT
COLOR AVAILABLE.
! SOLID STATE, HIGH VIBRATION RESISTANT.
!6V INTERNAL RESISTOR.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO:DSAB3302
APPROVED: J.LU
REV NO: V.2
CHECKED:Allen Liu
DATE:APR/13/2003
DRAWN:D.L.HUANG
PAGE: 1 OF 3
Selection Guide
P ar t N o .
Dic e
BLF052SURC/E-6V
Iv (m c d )
V=6V
L en s Ty p e
Hyper Red(InGaAIP)
WATER CLEAR
V i ew i n g
An g l e
Min .
Ty p .
2θ 1/2
900
1200
45°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°°C
Sy m b o l
P ar am et er
D ev i c e
Ty p .
Max .
Un its
Tes t Co n d it io n s
λ peak
Peak Wavelength
Hyper Red
640
-
nm
VF=6V
λD
Wavelength at Dominate Hyper Red
630
-
nm
VF=6V
∆λ1/2
Spectral Line Half-width Hyper Red
25
-
nm
VF=6V
IF
Forward Current
Hyper Red
23
-
mA
VF=6V
IR
Reverse Current
Hyper Red
-
10
uA
V R = 5V
Absolute Maximum Ratings at TA=25°°C
P ar am et er
H y p er R ed
Un its
180
mW
Forward Voltage
7
V
Reverse Voltage
5
V
Power dissipation
Operating Temperature
-40°C To +70°C
Storage Temperature
-40°C To +85°C
SPEC NO:DSAB3302
APPROVED: J.LU
REV NO: V.2
CHECKED:Allen Liu
DATE:APR/13/2003
DRAWN:D.L.HUANG
PAGE: 2 OF 3
Hyper
Red
SPEC NO:DSAB3302
APPROVED: J.LU
BLF052SURC/E-6V
REV NO: V.2
CHECKED:Allen Liu
DATE:APR/13/2003
DRAWN:D.L.HUANG
PAGE: 3 OF 3
Similar pages