Mean Well LPS-75-12 75w single output switching power supply Datasheet

LPS-75
75W Single Output Switching Power Supply
series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
PWM control and regulated
Small and compact size
Built-in remote ON-OFF control
LED indicator for power on
100% full load burn-in test
2 years warranty
SPECIFICATION
MODEL
LPS-75-3.3
LPS-75-5
LPS-75-12
LPS-75-15
LPS-75-24
LPS-75-48
DC VOLTAGE
3.3V
5V
12V
15V
24V
48V
RATED CURRENT
15A
15A
6.2A
5A
3.2A
1.56A
CURRENT RANGE
0 ~ 16.5A
0 ~ 16.5A
0 ~ 6.8A
0 ~ 5.5A
0 ~ 3.5A
0 ~ 1.7A
RATED POWER
49.5W
75W
74.4W
75W
76.8W
75W
82.5W
81.6W
82.5W
84W
74.88W
RIPPLE & NOISE (max.) Note.2 80mVp-p
80mVp-p
100mVp-p
100mVp-p
120mVp-p
120mVp-p
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V
11 ~ 13.5V
13.5 ~ 16.5V
PEAK LOAD(10sec.)
OUTPUT
Note.4 54.45W
VOLTAGE TOLERANCE Note.3
INPUT
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
3.0%
3.0%
2.0%
2.0%
1.0%
1.0%
SETUP, RISE TIME
100ms, 35ms/230VAC
HOLD UP TIME (Typ.)
60ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
100ms, 35ms/115VAC at full load
12ms/115VAC at full load
127 ~ 370VDC
77%
80%
EFFICIENCY(Typ.)
69%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
1.9A/115VAC
1.1A/230VAC
COLD START 18A/115VAC
36A/230VAC
OVERLOAD
OVER VOLTAGE
REMOTE ON/OFF
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND
VOLTAGE
SAFETY &
ISOLATION
RESISTANCE
EMC
(Note 5)
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
45 ~ 54V
2.0%
1.0%
PROTECTION
OTHERS
22 ~ 27V
3.0%
LINE REGULATION
LEAKAGE CURRENT
FUNCTION
3 ~3.5V
3.0%
81%
83%
83%
27.6 ~ 32.4V
57.6 ~ 67.2V
<1mA / 240VAC
115 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off
-20 ~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.04%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 / 70% RH
Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
355Khrs min. MIL-HDBK-217F (25 )
222*55*30mm (L*W*H)
0.3Kg; 48pcs/15.6Kg/1.12CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
File Name:LPS-75-SPEC 2011-08-10
LPS-75
75W Single Output Switching Power Supply
Mechanical Specification
series
Unit:mm
222
212
1
CN3 2
CN1
3
45
55
5
1
SVR1
AC FUSE
F4A/250V
4-
LED
3.8
2 max.
30
FS1
1
2
CN2 3
4
5
6
AC Input Connector (CN1) : JST B5P-VH or equivalent
Pin No.
1
2,4
3
5
Assignment
AC/L
No Pin
AC/N
FG
Mating Housing
Terminal
JST VHR
or equivalent
JST SVH-21T-P1.1
or equivalent
DC Output Connector (CN2) : JST B6P-VH or equivalent
Pin No.
1,2,3
4,5,6
Assignment
-V
+V
Terminal
JST SVH-21T-P1.1
or equivalent
Mating Housing
JST VHR
or equivalent
Remote ON/OFF Connector(CN3):JST B2B-XH or equivalent
Pin No.
1
2
Assignment
RC+
RC-
Mating Housing
Terminal
JST XHP
or equivalent
JST SXH-001T-P0.6
or equivalent
Block Diagram
fosc : 60KHz
EMI
FILTER
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
O.L.P.
PWM
CONTROL
RECTIFIERS
&
FILTER
+V
-V
FG
Static Characteristics (15V)
100
2
80
OUTPUT VOLTAGE (V)
1
3
1 Convection
LOAD (%)
60
40
2 18CFM Forced Air
3 5V Only
20
-20
0
10
20
30
40
50
AMBIENT TEMPERATURE ( )
60
70 (HORIZONTAL)
21
300
18
250
15
200
12
150
9
100
6
50
3
25
80
90
100
120
140
160
180
200
220
240
OUTPUT RIPPLE (mVp-p)
Derating Curve
DETECTION
CIRCUIT
264
INPUT VOLTAGE (V) 60Hz
File Name:LPS-75-SPEC 2011-08-10
Similar pages