STMicroelectronics M54HC04K Rad-hard hex inverter Datasheet

M54HC04
RAD-HARD HEX INVERTER
■
■
■
■
■
■
■
■
■
■
■
HIGH SPEED:
tPD = 8ns (TYP.) at VCC = 6V
LOW POWER DISSIPATION:
ICC = 1µA(MAX.) at TA=25°C
HIGH NOISE IMMUNITY:
VNIH = VNIL = 28% VCC (MIN.)
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 4mA (MIN) at VCC = 4.5V
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
WIDE OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 6V
PIN AND FUNCTION COMPATIBLE WITH
54 SERIES 04
SPACE GRADE-1: ESA SCC QUALIFIED
50 krad QUALIFIED, 100 krad AVAILABLE ON
REQUEST
NO SEL UNDER HIGH LET HEAVY IONS
IRRADIATION
DEVICE FULLY COMPLIANT WITH
SCC-9401-033
DILC-14
FPC-14
ORDER CODES
PACKAGE
FM
EM
DILC
FPC
M54HC04D
M54HC04K
M54HC04D1
M54HC04K1
The internal circuit is composed of 3 stages
including buffer output, which enables high noise
immunity and stable output.
All inputs are equipped with protection circuits
against static discharge and transient excess
voltage.
DESCRIPTION
The M54HC04 is an high speed CMOS HEX
INVERTER fabricated with silicon gate C2MOS
technology.
PIN CONNECTION
March 2004
1/8
M54HC04
IEC LOGIC SYMBOLS
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN N°
SYMBOL
1, 3, 5, 9, 11,
13
2, 4, 6, 8, 10,
12
7
NAME AND FUNCTION
1A to 6A
Data Inputs
1Y to 6Y
Data Outputs
GND
VCC
Ground (0V)
14
Positive Supply Voltage
TRUTH TABLE
A
Y
L
H
H
L
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
Parameter
Supply Voltage
Value
Unit
-0.5 to +7
V
VI
DC Input Voltage
-0.5 to VCC + 0.5
V
VO
DC Output Voltage
-0.5 to VCC + 0.5
± 20
V
mA
IIK
DC Input Diode Current
IOK
DC Output Diode Current
± 20
mA
IO
DC Output Current
± 25
mA
± 50
mA
ICC or IGND DC VCC or Ground Current
Power Dissipation
PD
Tstg
Storage Temperature
TL
Lead Temperature (10 sec)
300
mW
-65 to +150
°C
265
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied
2/8
M54HC04
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Supply Voltage
VI
Input Voltage
VO
Output Voltage
Top
Operating Temperature
Input Rise and Fall Time
tr, tf
Value
Unit
2 to 6
V
0 to VCC
V
0 to VCC
V
-55 to 125
°C
VCC = 2.0V
0 to 1000
ns
VCC = 4.5V
0 to 500
ns
VCC = 6.0V
0 to 400
ns
DC SPECIFICATIONS
Test Condition
Symbol
VIH
VIL
VOH
VOL
II
ICC
Parameter
High Level Input
Voltage
Low Level Input
Voltage
High Level Output
Voltage
Low Level Output
Voltage
Input Leakage
Current
Quiescent Supply
Current
Value
TA = 25°C
VCC
(V)
Min.
2.0
4.5
6.0
2.0
4.5
6.0
Typ.
Max.
1.5
3.15
4.2
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
1.5
3.15
4.2
0.5
1.35
1.8
Max.
1.5
3.15
4.2
0.5
1.35
1.8
V
0.5
1.35
1.8
2.0
IO=-20 µA
1.9
2.0
1.9
1.9
4.5
IO=-20 µA
4.4
4.5
4.4
4.4
6.0
IO=-20 µA
5.9
6.0
5.9
5.9
4.5
IO=-4.0 mA
4.18
4.31
4.13
4.10
5.68
Unit
V
V
6.0
IO=-5.2 mA
2.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=20 µA
0.0
0.1
0.1
0.1
6.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=4.0 mA
0.17
0.26
0.33
0.40
6.0
IO=5.2 mA
0.18
0.26
0.33
0.40
6.0
VI = VCC or GND
± 0.1
±1
±1
µA
6.0
VI = VCC or GND
1
10
20
µA
5.8
5.63
5.60
V
3/8
M54HC04
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, Input tr = tf = 6ns)
Test Condition
Symbol
ttLH ttHL
Parameter
Output Transition
Time
tPLH tPHL Propagation Delay
Time
Value
TA = 25°C
VCC
(V)
Min.
2.0
4.5
6.0
2.0
4.5
6.0
Typ.
Max.
38
8
6
45
9
8
75
15
13
95
19
16
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
95
19
16
120
24
20
Unit
Max.
110
22
19
145
29
25
ns
ns
CAPACITIVE CHARACTERISTICS
Test Condition
Symbol
Parameter
VCC
(V)
Value
TA = 25°C
Min.
Typ.
Max.
10
CIN
Input Capacitance
5.0
5
CPD
Power Dissipation
Capacitance (note
1)
5.0
22
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
10
Unit
Max.
10
pF
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/6 (per Gate)
TEST CIRCUIT
CL = 50pF or equivalent (includes jig and probe capacitance)
RT = ZOUT of pulse generator (typically 50Ω)
4/8
M54HC04
WAVEFORM: PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)
5/8
M54HC04
DILC-14 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
2.1
22.54
0.083
0.100
a1
3.00
3.70
0.118
0.146
a2
0.63
0.88
1.14
0.025
0.035
0.045
B
1.82
2.03
2.39
0.072
0.080
0.094
b
0.40
0.45
0.50
0.016
0.018
0.020
b1
0.20
0.254
0.30
0.008
0.010
0.012
D
18.79
19.00
19.20
0.740
0.748
0.756
e
7.36
7.62
7.87
0.290
0.300
0.310
e1
2.54
0.100
e2
15.11
15.24
15.37
0.595
0.600
0.605
e3
7.62
7.87
8.12
0.300
0.310
0.320
F
7.11
7.75
0.280
I
0.305
3.70
K
10.90
L
1.14
1.27
0.146
12.1
0.429
1.5
0.045
0.476
0.050
0.059
0016173H
6/8
M54HC04
FPC-14 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
6.75
6.91
7.06
0.266
0.272
0.278
B
9.76
9.95
10.14
0.384
0.392
0.399
C
1.49
1.95
0.059
D
0.10
0.127
0.15
0.004
0.005
0.006
E
7.50
7.62
7.75
0.295
0.300
0.305
F
G
1.27
0.38
0.050
0.43
H
L
0.077
0.48
0.015
0.017
6.0
0.019
0.236
18.75
22.0
0.738
0.866
M
0.38
0.015
N
4.31
0.170
G
F
D
H
14
8
L
N
A
7
1
H
E
B
M
C
016029E
7/8
M54HC04
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
All other names are the property of their respective owners
© 2004 STMicroelectronics - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
http://www.st.com
8/8
Similar pages