Hittite HMC830LP6GE 1110 Fractional-n pll with integrated vco 25 - 3000 mhz Datasheet

HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Features
• RF Bandwidth:
25 - 3000 MHz
• <180 fs RMS Jitter
• Maximum Phase Detector Rate
100 MHz
• Exact Frequency Mode
• Ultra Low Phase Noise
-110 dBc/Hz in Band Typ.
• 40 Lead 6x6 mm SMT Package: 36 mm2
• 24-bit Step Size, Resolution 3 Hz typ
• Built in Digital Self Test
• Figure of Merit (FOM) -227 dBc/Hz
Typical Applications
PLLs with integrated vco - SMT
7
7-1
• Cellular/4G Infrastructure
• Phased Array Applications
• Repeaters and Femtocells
• DDS Replacement
• Communications Test Equipment
• Very High Data Rate Radios
• CATV Equipment
• Tunable Reference Source for SpuriousFree Performance
Functional Diagram
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
General Description
The HMC830LP6GE is a low noise, wide band, Fractional-N Phase-Locked-Loop (PLL) that features an integrated
Voltage Controlled Oscillator (VCO) with a fundamental frequency of 1500 MHz - 3000 MHz, and an integrated VCO
Output Divider (divide by 1/2/4/6.../60/62), that together allow the HMC830LP6GE to generate frequencies from
25 MHz to 3000 MHz. The integrated Phase Detector (PD) and delta-sigma modulator, capable of operating at up to
100 MHz, permit wider loop-bandwidths with excellent spectral performance.
The HMC830LP6GE features industry leading phase noise and spurious performance, across all frequencies, that
enable it to minimize blocker effects, and improve receiver sensitivity and transmitter spectral purity. The superior
noise floor (< -170 dBc/Hz) makes the HMC830LP6GE an ideal source for a variety of applications - such as; LO for
RF mixers, a clock source for high-frequency data-converters, or a tunable reference source for ultra-low spurious
applications.
For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To
view the Operating Guide, please visit www.hittite.com and choose HMC830LP6GE from the “Search by Part
Number” pull down menu.
Electrical Specifications
VPPCP, VDDLS, VCC1, VCC2 = 5 V; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3 V
Min and Max Specified across Temp -40 °C to 85 °C
Parameter
Condition
Min.
Typ.
Max.
Units
3000
MHz
RF Output Characteristics
Output Frequency
25
VCO Frequency at PLL Input
1500
3000
MHz
RF Output Frequency at f VCO
1500
3000
MHz
7.5
dBm
9
dB
Output Power
RF Output Power at f VCO = 2000 MHz
Across All Frequencies see Figure 10
Output Power Control
Broadband Matched Internally
[1]
4.5
3 dB Steps
7
6
Harmonics
fo Mode at 2 GHz
2nd / 3rd / 4th
-20/-29/-45
dBc
fo/2 Mode at 2GHz/2 = 1 GHz
2nd / 3rd / 4th
-23/-15/-35
dBc
fo/30 Mode at 3 GHz/30 = 100 MHz
2nd / 3rd / 4th
-25/-10/-33
dBc
fo/62 Mode at 1550 MHz/62 = 25 MHz
2nd / 3rd / 4th
-17/-8/-21
dBc
VCO Output Divider
VCO RF Divider Range
1,2,4,6,8,...,62
1
62
Max = 219 - 1
16
524,287
Fractional nominal divide ratio
varies (-3 / +4) dynamically max
20
524,283
PLL RF Divider Characteristics
19-Bit N-Divider Range (Integer)
19-Bit N-Divider Range (Fractional)
7
PLLs with integrated VCO - SMT
Additional features of the HMC830LP6GE include RF output power control from 0 to 9 dB (3 dB steps), output Mute
function, and a delta-sigma modulator Exact Frequency Mode which enables users to generate output frequencies
with 0 Hz frequency error.
REF Input Characteristics
Max Ref Input Frequency
Ref Input Voltage
Ref Input Capacitance
AC Coupled
[2]
1
2
350
MHz
3.3
Vp-p
5
pF
[1] Measured single-ended. Additional 3 dB possible with differential outputs.
[2] Measured with 100 Ω external termination. See Hittite PLL w/ Integraged VCOs Operating Guide Reference Input Stage section for more details.
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-2
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Electrical Specifications (Continued)
Parameter
Condition
14-Bit R-Divider Range
Min.
Typ.
Max.
1
16,383
Units
Phase Detector (PD) [3]
PD Frequency Fractional Mode B
[4]
DC
100
MHz
PD Frequency Fractional Mode A (and Register
6 [17:16] = 11)
DC
80
MHz
PD Frequency Integer Mode
DC
125
MHz
2.54
mA
Charge Pump
Output Current
0.02
Charge Pump Gain Step Size
PD/Charge Pump SSB Phase Noise
PLLs with integrated vco - SMT
7
20
µA
50 MHz Ref, Input Referred
1 kHz
-143
dBc/Hz
10 kHz
Add 1 dB for Fractional
-150
dBc/Hz
100 kHz
Add 3 dB for Fractional
-153
dBc/Hz
Logic Inputs
Vsw
40
50
60
% DVDD
Logic Outputs
VOH Output High Voltage
DVDD
VOL Output Low Voltage
0
Output Impedance
100
Maximum Load Current
V
V
200
Ω
1.5
mA
Power Supply Voltages
3.3 V Supplies
5 V Supplies
AVDD, VCCHF, VCCPS,
VCCPD, RVDD,DVDD
3.0
3.3
3.5
V
VPPCP, VDDCP, VCC1, VCC2
4.8
5
5.2
V
Power Supply Currents
+5V Analog Charge Pump
+5V VCO Core and VCO Buffer
+5V VCO Divider and RF/PLL Buffer
+3.3V
Power Down - Crystal Off
Power Down - Crystal On, 100 MHz
VPPCP, VDDCP
8
mA
fo/1 Mode VCC2
105
mA
fo/N Mode VCC2
80
mA
fo/1 Mode VCC1
25
mA
fo/N Mode VCC1
80
100
mA
AVDD, VCCHF, VCCPS,
VCCPD, RVDD, DVDD3V
52
mA
Reg 01h=0,
Crystal Not Clocked
10
µA
Reg 01h=0,
Crystal Clocked 100 MHz
10
30
mA
Power on Reset
Typical Reset Voltage on DVDD
Min DVDD Voltage for No Reset
Power on Reset Delay
700
mV
250
µs
-86
dBc/Hz
1.5
V
VCO Open Loop Phase Noise at fo @ 2 GHz
10 kHz Offset
[3] Slew rate of greater or equal to 0.5 ns/V is recommended, see PLL with Integrated RF VCOs Operating Guide for more details. Frequency is
guaranteed across process voltage and temperature from -40 °C to 85 °C.
[4] This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback
mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less.
7-3
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Electrical Specifications (Continued)
Parameter
Condition
100 kHz Offset
Min.
Typ.
Max.
Units
-116
dBc/Hz
dBc/Hz
1 MHz Offset
-141
10 MHz Offset
-162
dBc/Hz
100 MHz Offset
-171
dBc/Hz
10 kHz Offset
-92
dBc/Hz
100 kHz Offset
-122
dBc/Hz
VCO Open Loop Phase Noise at fo @ 2 GHz/2 = 1 GHz
-147
dBc/Hz
-165
dBc/Hz
100 MHz Offset
-165
dBc/Hz
10 kHz Offset
-112
dBc/Hz
100 kHz Offset
-142
dBc/Hz
VCO Open Loop Phase Noise at fo @3 GHz/30 = 100 MHz
1 MHz Offset
-165
dBc/Hz
10 MHz Offset
-168
dBc/Hz
100 MHz Offset
-171
dBc/Hz
-230
dBc/Hz
Figure of Merit
Floor Integer Mode
Normalized to 1 Hz
Floor Fractional Mode
Normalized to 1 Hz
-227
dBc/Hz
Flicker (Both Modes)
Normalized to 1 Hz
-268
dBc/Hz
VCO Tuning Sensitivity at 2800 MHz
Measured at 2.5 V
13.3
MHz/V
VCO Tuning Sensitivity at 2400 MHz
Measured at 2.5 V
13.8
MHz/V
VCO Tuning Sensitivity at 2000 MHz
Measured at 2.5 V
13.6
MHz/V
VCO Tuning Sensitivity at 1600 MHz
Measured at 2.5 V
12.1
MHz/V
VCO Supply Pushing
Measured at 2.5 V
2
MHz/V
VCO Characteristics
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7
PLLs with integrated VCO - SMT
1 MHz Offset
10 MHz Offset
7-4
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Figure 2. Typical Closed Loop Fractional
Phase Noise [“Loop Filter Configuration Table”]
-100
-100
-120
-120
PHASE NOISE (dBc)
PHASE NOISE (dBc)
Figure 1. Typical Closed Loop Integer
Phase Noise[“Loop Filter Configuration Table”]
-140
-160
-140
-160
fout 880 MHz, Loop BW 74 kHz, rms jitter 149 fs
fout 880 MHz, Loop BW 90 kHz, rms jitter 142 fs
fout 875 MHz, Loop BW 74 kHz, rms jitter 147 fs
fout 875 MHz, Loop BW 90 kHz, rms jitter 116 fs
fout 1600 MHz, Loop BW 74 kHz, rms jitter 127 fs
fout 1600 MHz, Loop BW 90 kHz, rms jitter 97 fs
fout 2500 MHz, Loop BW 74 kHz, rms jitter 153 fs
fout 2500 MHz, Loop BW 90 kHz, rms jitter 104 fs
-180
-180
fout 1605 MHz, Loop BW 90 kHz, rms jitter 123 fs
fout 2505 MHz, Loop BW 74 kHz, rms jitter 157 fs
fout 2505 MHz, Loop BW 90 kHz, rms jitter 131 fs
-200
-200
1
10
100
1000
OFFSET (kHz)
10000
100000
-40
-100
-60
-110
-80
-100
-120
-140
2817 MHz
2418 MHz
1996 MHz
1575 MHz
-160
10
100
1000
10000
100000
Figure 4. Free Running VCO
Phase Noise vs. Temperature
PHASE NOISE (dBc/Hz)
PHASE NOISE (dBc/Hz)
1
OFFSET (kHz)
Figure 3. Free Running Phase Noise
100 kHz Offset
27 C
-40 C
85 C
-120
-130
1 MHz Offset
-140
-150
-160
100 MHz Offset
-170
-180
-180
1
10
100
1000
10000
100000
10
100
OFFSET (kHz)
1000
10000
FREQUENCY (MHz)
Figure 6. Typical Tuning Voltage
After Calibration
Figure 5. Typical VCO Sensitivity
60
40
30
20
10
0
0
1
2
3
TUNING VOLTAGE (V)
4
5
TUNE VOLTAGE AFTER CALIBRATION (V)
5
2817 MHz at 2.5V, Tuning Cap 15
2418 MHz at 2.5V, Tuning Cap 15
1996 MHz at 2.5V, Tuning Cap 15
1575 MHz at 2.5V, Tuning Cap 15
50
kVCO (MHz/V)
PLLs with integrated vco - SMT
7
7-5
fout 1605 MHz, Loop BW 74 kHz, rms jitter 130 fs
4
fmin
3
31
fmax
15
0
2
1
0
VCO FREQUENCY
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Figure 7. Integrated RMS Jitter[1]
Figure 8. Figure of Merit
300
200
150
100
50
10
100
1000
-210
Typ FOM vs Offset
-220
FOM Floor
FOM 1/f Noise
-230
-240
2
10
10000
10
3
10
4
10
5
10
6
FREQUENCY OFFSET (Hz)
OUTPUT FREQUENCY (MHz)
7
Figure 10. Typical Output Power vs.
Temperature, Maximum Gain
Figure 9. Typical Output Power
10
10
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
8
5
0
-5
6
4
-40 C
27 C
85 C
2
Gain Setting 11
Gain Setting 10
Gain Setting 01
Gain Setting 00
0
-10
10
100
1000
10
10000
100
10000
Figure 12. Reference Input Sensitivity,
Square Wave, 50 Ω [2]
Figure 11. RF Output Return Loss
0
234
-5
232
230
-10
FOM (dBc/Hz)
RETURN LOSS (dB)
1000
OUTPUT FREQUENCY (MHz)
OUTPUT FREQUENCY (MHz)
-15
-20
228
226
14 MHz Square Wave
25 MHz Square Wave
50 MHz Square Wave
100 MHz Square Wave
224
-25
222
-30
10
100
1000
OUTPUT FREQUENCY (MHz)
10000
220
-15
-12
-9
-6
-3
0
PLLs with integrated VCO - SMT
-40C
27C
85C
250
JITTER (fs)
NORMALIZED PHASE NOISE (dBc/Hz)
-200
3
REFERENCE POWER (dBm)
[1] RMS Jitter data is measured in fractional mode with 100 kHz Loop bandwidth using 50 MHz reference frequency from 1 kHz to 20 MHz
integration bandwidth.
[2] Measured from a 50 Ω source with a 100 Ω external resistor termination. See PLL with Integrated RF VCOs Operating Guide Reference Input
Stage section for more details. Full FOM performance up to maximum 3.3 Vpp input voltage.
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-6
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Figure 13. Reference Input Sensitivity
Sinusoid Wave, 50 Ω[3]
Figure 14. Integer Boundary Spur at
2500.2 MHz[4]
235
-60
230
PHASE NOISE (dBc/Hz)
-80
FOM (dBc/Hz)
225
220
215
14 MHz sin
25 MHz sin
50 MHz sq
100 MHz sq
210
205
-140
-180
-20
-15
-10
-5
0
5
1
10
REFERENCE POWER (dBm)
1000
10000
100000
Figure 16. Fractional-N Exact Frequency
Mode ON Performance at 2113.5 MHz[6]
0
0
-20
-20
-40
-40
PHASE NOISE (dBc/Hz)
PHASE NOISE (dBc/Hz)
100
OFFSET (kHz)
Figure 15. Integer-N Exact Frequency
Mode ON Performance at 704 MHz[5]
-60
-80
-100
-120
-140
-60
-80
-100
-120
-140
-160
-160
-180
-180
1
10
100
1000
10000
100000
1
10
OFFSET (kHz)
100
1000
10000
100000
OFFSET (kHz)
Figure 17. Fractional-N Exact Frequency
Mode ON Performance at 2591 MHz[7]
Figure 18. Fractional-N Exact Frequency
Mode OFF Performance at 2591 MHz[8]
0
0
-20
-20
-40
-40
PHASE NOISE (dBc/Hz)
PHASE NOISE (dBc/Hz)
PLLs with integrated vco - SMT
-120
-160
200
7
-100
-60
-80
-100
-120
-60
-80
-100
-120
-140
-140
-160
-160
-180
-180
1
10
100
1000
OFFSET (kHz)
10000
100000
1
10
100
1000
10000
100000
OFFSET (kHz)
[3] Measured from a 50 Ω source with a 100 Ω external resistor termination. See PLL with Integrated RF VCOs Operating Guide Reference Input Stage
section for more details. Full FOM performance up to maximum 3.3 Vpp input voltage.
[4] Fractional Mode in Mode B, Integer Boundary at 2500 MHz
[5] REF in = 100 MHz, PD = 800 kHz, Output Divider 4 Selected, Loop Filter bandwidth = 16 kHz, Channel Spacing 200 kHz
[6] Exact Frequency Mode, REF in = 100 MHz, PD = 50 MHz, Output Divider 1 Selected, Loop Filter bandwidth = 100 kHz, Channel Spacing = 100 kHz
[7] Exact Frequency Mode, Channel Spacing = 100 kHz, Fractional Mode B RF out = 2591 MHz, REF in = 100 MHz, PD frequency = 50 MHz, Output
Divider 1 selected, Loop Filter bandwidth = 120 kHz,
[8] Fractional Mode B RF out = 2591 MHz, REF in = 100 MHz, PD frequency = 50 MHz, Output Divider 1 selected, Loop Filter bandwidth = 120 kHz.
7-7
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Figure 20. Worst Spur, Tunable Reference,
Output Frequency = 2000.1 MHz [9]
0
0
-20
-20
-40
-40
PHASE NOISE (dBc/Hz)
-60
-80
-100
-120
-60
-80
-100
-120
-140
-140
-160
-160
-180
-180
0.1
1
10
100
1000
10000
100000
0.1
1
10
OFFSET (kHz)
Figure 21. Worst Spur, Fixed vs. Tunable
Reference [10]
1000
10000
100000
7
Figure 22. Low Frequency Performance [11]
-120
-50
-60
Carrier Frequency = 25 MHz
Carrier Frequency = 55.55 MHz
Carrier Frequency = 100 MHz
-130
PHASE NOISE (dBc/Hz)
WORST SPUR (dBc)
100
OFFSET (kHz)
-70
-80
Fixed 50 MHz Reference
Tunable Reference
-90
-100
-140
-150
-160
-110
-170
0.1
-120
2GHz +1kHz
2GHz +10kHz
2GHz +100kHz
2GHz +1000kHz
2GHz +10000kHz
1
10
100
1000
10000
100000
OFFSET (kHz)
OUTPUT FREQUENCY
Loop Filter Configuration Table
Loop Filter
BW (kHz)
C1
(pF)
C2
(nF)
C3
(pF)
C4
(pF)
R2
(kΩ)
R3
(kΩ)
R4
(kΩ)
74
150
27
220
220
0.82
1
1
90
270
3.9
56
56
1.2
1
1
Loop Filter Design
PLLs with integrated VCO - SMT
PHASE NOISE (dBc/Hz)
Figure 19. Worst Spur, Fixed 50 MHz
Reference, Output Freq. = 2000.1 MHz[9]
[9] Capability of HMC830LP6GE to generate low frequencies (as low as 25 MHz), enables the HMC830LP6GE to be used as a tunable reference
source into another HMC830LP6GE, which maximizes spur performance of the second HMC830LP6GE. Please see “HMC830LP6GE
Application Information” for more information.
[10] The graph is generated by observing, and plotting, the magnitude of only the worst spur (largest magnitude), at any offset, at each output
frequency, while using a fixed 50 MHz reference and a tunable reference tuned to 47.5 MHz. See “HMC830LP6GE Application Information” for
more details.
[11] Phase noise performance of the HMC830LP6GE when used as a tunable reference source. HMC830LP6GE is operating at 3 GHz/30, 3
GHz/54, and 1.55 GHz/62 for the 100 MHz, 55.55 MHz, and 25 MHz curves respectively. 25 MHz output is 50 MHz low pass filtered prior to input
to second PLL. 100 MHz and 55.55 MHz curves were not filtered.
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7-8
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Pin Descriptions
PLLs with integrated vco - SMT
7
7-9
Pin Number
Function
Description
1
AVDD
DC Power Supply for analog circuitry.
2, 5, 6, 8, 9,
11 - 14, 18 - 22, 24,
26, 34, 37, 38
N/C
The pins are not connected internally; however, all data shown herein
was measured with these pins connected to RF/DC ground externally.
Power Supply for charge pump analog section
3
VPPCP
4
CP
Charge Pump Output
7
VDDLS
Power Supply for the charge pump digital section
10
RVDD
Reference Supply
15
XREFP
Reference Oscillator Input
16
DVDD3V
DC Power Supply for Digital (CMOS) Circuitry
17
CEN
Chip Enable. Connect to logic high for normal operation.
23
VTUNE
VCO Varactor. Tuning Port Input.
25
VCC2
VCO Analog Supply 2
27
VCC1
VCO Analog Supply 1
28
RF_N
RF Negative Output
29
RF_P
RF Positive Output
30
SEN
PLL Serial Port Enable (CMOS) Logic Input
31
SDI
PLL Serial Port Data (CMOS) Logic Input
32
SCK
PLL Serial Port Clock (CMOS) Logic Input
33
LD_SDO
Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO)
35
VCCHF
DC Power Supply for Analog Circuitry
36
VCCPS
DC Power Supply for Analog Prescaler
39
VCCPD
DC Power Supply for Phase Detector
40
BIAS
External bypass decoupling for precision bias circuits.
Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot
drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A,
normal 10MΩ DVM will read erroneously.
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Absolute Maximum Ratings
AVDD, RVDD, DVDD3V, VCCPD,
VCCHF, VCCPS
-0.3V to +3.6V
VPPCP, VDDCP, VCC1
-0.3V to +5.5V
VCC2
-0.3V to +5.5V
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to 150°C
Maximum Junction Temperature
125 °C
Thermal Resistance (RTH)
(junction to ground paddle)
20 °C/W
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Reflow Soldering
260°C
Time at Peak Temperature
40 sec
ESD Sensitivity (HBM)
7
Class 1B
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA
AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm
MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF
GROUND.
PLLs with integrated VCO - SMT
Peak Temperature
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
Package Marking [1]
HMC830LP6GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
H830
XXXX
[1] 4-Digit lot number XXXX
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 10
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
Evaluation PCB
PLLs with integrated vco - SMT
7
7 - 11
The circuit board used in the application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the
ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Evaluation PCB Schematic
To view this Evaluation PCB Schematic please visit www.hittite.com and choose HMC830LP6GE from the
“Search by Part Number” pull down menu to view the product splash page.
Evaluation Order Information
Item
Contents
Part Number
Evaluation PCB Only
HMC830LP6GE Evaluation PCB
EVAL01-HMC830LP6GE
Evaluation Kit
HMC830LP6GE Evaluation PCB
USB Interface Board
6’ USB A Male to USB B Female Cable
CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software,
Hittite PLL Design Software)
EKIT01-HMC830LP6GE
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC830LP6GE
v01.0711
FRACTIONAL-N PLL WITH INTEGRATED VCO
25 - 3000 MHz
HMC830LP6GE Application Information
Large bandwidth (25 MHz to 3000 MHz), industry leading phase noise and spurious performance, excellent noise floor
(<-170 dBc/Hz), coupled with a high level of integration make the HMC830LP6GE ideal for a variety of applications; as
an RF or IF stage LO, a clock source for high-frequency data-converters, or a tunable reference source for extremely
low spurious applications (< -100 dBc/Hz spurs).
Figure 23. HMC830LP6GE in a typical transmit chain
Figure 24. HMC830LP6GE in a typical receive chain
Figure 25. HMC830LP6GE used as a tunable reference for second HMC830LP6GE
PLLs with integrated VCO - SMT
7
Using the HMC830LP6GE with a tunable reference as shown in Figure 25, it is possible to drastically improve spurious
emissions performance across all frequencies. Example shown in Figure 21 graph shows that it is possible to have
spurious emissions < -100 dBc/Hz across all frequencies. For more information about spurious emissions, how they
are related to the reference frequency, and how to tune the reference frequency for optimal spurious performance
please see the “Spurious Performance” section of Hittite PLL w/ Integraged VCOs Operating Guide. Note that at very
low output frequencies < 100 MHz, harmonics increase due to small internal AC coupling. Applications which are
sensitive to harmonics may require external low pass filtering.
For price, delivery, and to place orders: Hittite Microwave Corporation,20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 12
Similar pages