Taychipst FR302G Glass passivated fast recovery rectifier Datasheet

FR301G-FR307G
50V-1000V
3.0A
GLASS PASSIVATED FAST RECOVERY RECTIFIERS
Features
Low forward voltage drop
High current capability
High reliability
High surge current capability
Mechanical Data
Cases: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Axial leads, solderable per MIL-STD-
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
℃/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs.,(2.3kg) tension
Mounting position: Any
Weight: 1.2 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
FR301G FR302G FR303G FR304G FR305G FR306G FR307G UNITS
50
35
50
100
70
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
1000
V
V
V
.375"(9.5mm) Lead Length at Ta=55 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
3.0
A
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
Ta=25 C
125
1.3
5.0
A
V
A
100
at Rated DC Blocking Voltage
Ta=100 C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range Tj, TSTG
250
150
-65
60
+175
500
A
nS
pF
C
NOTES:
1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
E-mail: [email protected]
1 of 2
Web Site: www.taychipst.com
FR301G-FR307G
50V-1000V
3.0A
GLASS PASSIVATED FAST RECOVERY RECTIFIERS
RATINGS AND CHARACTERISTIC CURVES (FR301G THRU FR307G)
FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50W
NONINDUCTIVE
10W
NONINDUCTIVE
trr
+0.5A
(-)
DUT
(+)
50Vdc
(approx)
(-)
PULSE
GENERATOR
(NOTE 2)
1W
NON
INDUCTIVE
OSCILLOSCOPE
(NOTE 1)
0
-0.25A
(+)
-1.0A
NOTES: 1. Rise Time=7ns max. Input Impedance=
1 megohm 22pf
2. Rise Time=10ns max. Sourse Impedance=
50 ohms
1cm
FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
4
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT AMPERES
FIG.2- MAXIMUM FORWARD CURRENT DERATING
CURVE
3
2
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.375"(9.5mm)
Lead Length
1
0
0
25
50
75
100
125
150
200
100
50
20
10
1
175
o
AMBIENT TEMPERATURE. ( C)
2
4
6
8
10
20
40
60
80 100
NUMBER OF CYCLES AT 60Hz
FIG.5- TYPICAL JUNCTION CAPACITANCE
FIG.4- TYPICAL FORWARD CHARACTERISTICS
10
1000
Tj=25oC
JUNCTION CAPACITANCE.(pF)
INSTANTANEOUS FORWARD CURRENT. (A)
SET TIME BASE FOR
5/ 10ns/ cm
1
0.1
0.01
0.4
100
10
0.6
0.8
1.0
1.2
1.4
1.6
1
FORWARD VOLTAGE. (V)
E-mail: [email protected]
5
10
100
REVERSE VOLTAGE. (V)
2 of 2
Web Site: www.taychipst.com
Similar pages