MCC44 MCD44 Thyristor Modules Thyristor/Diode Modules ITRMS = 2x80 A ITAVM = 2x51 A VRRM = 800-1800 V VRSM VRRM TO-240 AA VDSM VDRM V V 900 1300 1500 1700 1900 800 1200 1400 1600 1800 Type 1 MCC MCC MCC MCC MCC 44-08 44-12 44-14 44-16 44-18 1B io1 B / io1 B / io1 B / io1 B / io1 B / Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 83°C; 180° sine TC = 85°C; 180° sine ITSM, IFSM TVJ = 45°C; VR = 0; io8 B io8 B io8 B io8 B io8 B Version MCD MCD MCD MCD MCD 1B 44-08 44-12 44-14 44-16 44-18 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1230 A A TVJ = TVJM; t = 10 ms; VR = 0; (50 Hz), sine t = 8.3 ms (60 Hz), sine 1000 1070 A A TVJ = 45°C; VR = 0, t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 6600 6280 A2s A2s t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5000 4750 2 As A2s TVJ = TVJM; repetitive, IT = 150 A f = 50Hz; tP = 200µs; VD = 2/3 VDRM; IG = 0.45 A; non repetitive, IT = ITAVM diG/dt = 0.45 A/µs 150 A/µs 500 A/µs TVJ = TVJM; VDR = /3 VDRM RGK = ∞; method 1 (linear voltage rise) PGM TVJ = TVJM; IT = ITAVM; tP = 30 µs tP = 300 µs 1000 V/µs W W PGAV 0.5 W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 °C °C °C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS; IISOL ≤ 1 mA; Md Mounting torque (M5) Terminal connection torque (M5) t = 1 min t=1s typical including screws IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 6 7 1 5 4 2 3 1 5 4 2 1 5 2 1 5 2 MCC Version 1 B MCD Version 1 B 3 6 MCC Version 8 B MCD Version 8 B Features 10 5 Weight 3 3 (dv/dt)cr 5 io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B Maximum Ratings 2 4 8B 80 51 49 TVJ = TVJM; VR = 0; (di/dt)cr 8B 7 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g • International standard package, JEDEC TO-240 AA • Direct copper bonded Al2O3-ceramic base plate • Planar passivated chips • Isolation voltage 3600 V~ • UL registered, E 72873 • Gate-cathode twin pins for version 1B Applications • DC motor control • Softstart AC motor controller • Light, heat and temperature control Advantages • Space and weight savings • Simple mounting with two screws • Improved temperature and power cycling • Reduced protection circuits 419 Version Symbol I2dt 6 3 2 1-4 MCC44 MCD44 Symbol Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT, IF = 200 A; TVJ = 25°C 1.75 V VT0 rT For power-loss calculations only (TVJ = 125°C) 0.85 5.3 V mΩ VGT VD = 6 V; IGT VD = 6 V; 1.5 1.6 100 200 V V mA mA TVJ TVJ TVJ TVJ = = = = 5 25°C -40°C 25°C -40°C TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 µs, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/µs 2 µs tq TVJ = TVJM; IT = 120 A, tP = 200 µs; -di/dt = 10 A/µs VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM typ. 150 µs QS IRM TVJ = TVJM; IT /IF = 50 A, -di/dt = 0.64 A/µs 90 11 µC A RthJC per per per per 0.53 0.265 0.73 0.365 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 RthJK dS dA a other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration Optional accessories for module-type MCC 44 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1: IGT, TVJ = 125°C mA VGD IGD thyristor/diode; DC current module thyristor/diode; DC current module 10 V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VG 3 2 1 5 6 1 4 4: PGAV = 0.5 W 5: PGM = IGD, TVJ = 125°C 0.1 100 101 5W 6: PGM = 10 W 102 103 IG mA 104 Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C µs tgd typ. 100 Limit 10 1 10 mA 100 1000 IG Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC Version 8 B IXYS reserves the right to change limits, test conditions and dimensions 2-4 MCD Version 8 B 333 419 MCC/MCD Version 1 B © 2004 IXYS All rights reserved MCC44 MCD44 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 419 Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature 3-4 MCC44 MCD44 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d RthJC (K/W) DC 180° 120° 60° 30° 0.53 0.55 0.58 0.6 0.62 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.015 0.026 0.489 0.0035 0.02 0.195 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d RthJK (K/W) DC 180° 120° 60° 30° 0.73 0.75 0.78 0.8 0.82 Constants for ZthJK calculation: IXYS reserves the right to change limits, test conditions and dimensions 4-4 Rthi (K/W) ti (s) 0.015 0.026 0.489 0.2 0.0035 0.02 0.195 0.68 419 i 1 2 3 4 © 2004 IXYS All rights reserved