NXP LPC214x Nxp microcontrollers selection guide Datasheet

November 2012
NXP Microcontrollers Selection Guide
NXP LPC family of microcontrollers is changing the landscape for embedded applications. Featuring award-winning innovations in connectivity, flexibility, level of
Integration, packaging, performance, power consumption, security, ease-of-use, and more, NXP’s LPC family provides developers a scalable continuum of 32-bit ARM based
microcontrollers with both software and hardware reusability and portability. NXP’s microcontrollers include the latest 32-bit Cortex-M0, Cortex-M3, and Cortex-M4 based
product cores and deliver high performance, low power consumption, and many peripheral options. Surrounded by a rapidly growing eco-system of tools, community and
support, LPC product are designed to help you easily transition from concept to production.
LPC Go
NXP’s LPC Go microcontrollers feature unprecedented performance, simplicity, and low-power. These products, based on 32-bit ARM cores, are the most cost effective series compared to 8/16-bit
solutions and provide a dramatic reduction in code size for every application. LPC Go products can reduce your system cost and power consumption and are easy to use providing faster time-tomarket. This category includes Cortex-M0, Cortex-M3 and ARM7 based microcontrollers.
LPC811
8
2
4**
1
4*
2
1
1
1
14
30
1.8 - 3.6
F
TSSOP16
On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program,
Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant
LPC812
16
4
4**
1
4*
3
1
2
1
14
30
1.8 - 3.6
F
TSSOP16
On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program,
Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant
LPC812
16
4
4**
1
4*
2
1
1
1
18
30
1.8 - 3.6
F
SO20
On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program,
Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant
LPC812
16
4
4**
1
4*
3
1
2
1
18
30
1.8 - 3.6
F
TSSOP20
On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program,
Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant
8
8
8
5
5
5
9**
9**
11**
1
1
1
4-8
5
11**
1
Temp. range
options
CPU Voltage (V)
On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program,
Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant
I/O voltage (V)
Max freq. (MHz)
DIP8
RTC
F
External bus
interface
1.8 - 3.6
I/O pins
30
SD/MMC
6
LCD controller
1
Comparator
1
DAC (10-bit)
channels
1
ADC
channels/
resolution
2
I2S
4*
SSP/SPI
1
SPIFI
I2C
4**
CAN
UART
1
USB
4
Ethernet
PWM
channels++
LPC810
Type
EEPROM (KB)
State config
timer
Analog
Standard
Timers+
Serial Interfaces
RAM (KB)
Timers
Flash (KB)
Memory
Package
Comment/Special features
LPC800 devices
LPC1100XL devices
LPC1102
32
LPC1104
32
LPC1115
64
LPC1114
32
1
1
1
2
5/10 b
5/10 b
8/10 b
11
13
42
50
50
50
3.3
3.3
3.3
F
F
F
WLCSP16
WLCSP16
LQFP48
2.17 x 2.32 x 0.6 mm miniture package size
2.17 x 2.32 x 0.6 mm miniature package size
64K Flash version of the LPC1114
1
1-2
8/10 b
28/42
50
3.3
F
TSSOP28, DIP28, HVQFN33, LQFP48
On-chip power profile, I/O 5V tolerant;
Both 7 mm x 7 mm and 5 mm x 5 mm HVQFN33 available
LPC1113
24
4-8
5
11**
1
1
1-2
8/10 b
28/42
50
3.3
F
HVQFN33, LQFP48
On-chip power profile, I/O 5V tolerant
LPC1112
16
2-4
5
11**
1
1
1
8/10 b
28
50
3.3
F
TSSOP20, TSSOP28, HVQFN24/33
On-chip power profile, I/O 5V tolerant;
Both 7 mm x 7 mm and 5 mm x 5 mm HVQFN33 available
LPC1111
LPC1110
8
4
2-4
1
5
5
11**
11**
1
1
1
1
1
1
8/10 b
5/10 b
28
16
50
50
3.3
3.3
F
F
TSSOP20, HVQFN33
SO20
On-chip power profile, I/O 5V tolerant
On-chip power profile, I/O 5V tolerant
*SCT peripheral can be configured as additional timers and/or PWM channels
Includes Watchdog timer. ++ Using timers.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
+
**MRT (Multi rate timer), Self wake-up timer, SCT can be configured as additonal timer
4
2
1
512 b
8
8
8
4
10
8
8
8
2
64
32
16
8
4
2
4
4
2
I/O voltage (V)
CPU Voltage (V)
Max freq. (MHz)
1
1
1
1
1
1
1
1
2
2
2
2
8/10 b
8/10 b
8/10 b
8/10 b
28/40/54
40
40
28
50
50
50
50
3.3
3.3
3.3
3.3
F
F
F
F
LQFP64, LQFP48, HVQFN33
LQFP48
LQFP48
HVQFN33
ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM
ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM
ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM
ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM
6
6
6
6
13**
13**
13**
13**
2
2
2
2
1
1
1
1
1
1
1
1
8/10 b
8/10 b
8/10 b
8/10 b
39/55
39/55
39/55
39/55
30
30
30
30
3.3
3.3
3.3
3.3
F
F
F
F
LQFP48, LQFP64
LQFP48, LQFP64
LQFP48, LQFP64
LQFP48. LQFP64
Additional DMA, CRC, 2x comparators, RS-48S
Additional DMA, CRC, 2x comparators, RS-48S
Additional DMA, CRC, 2x comparators, RS-48S
Additional DMA. CRC. 2x comparators. RS-48S
5
5
5
5
5
11**
11**
11**
11**
11**
1
1
1
1
1
1
1
1
1
1
2
2
2
1
1
8/12 b
8/12 b
8/12 b
8/10 b
8/10 b
28-51
28-51
28-51
28-42
28
72
72
72
72
72
3.3
3.3
3.3
3.3
3.3
F
F
F
F
F
LQFP64, LQFP48, HVQFN33
LQFP64, LQFP48, HVQFN33
LQFP64, LQFP48, HVQFN33
LQFP48, HVQFN33
HVQFN33
USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM
USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM
USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM
Low-cost, low-power Cortex-M3 device
8K Flash / 2K RAM version of LPC1313
5
5
5
6
6
6
6
6
6
14**
14**
14**
2
2
2
2
2
2
1
1
1
2
2
2
1
1
1
2
2
2
8/12 b
8/10 b
8/10 b
32
32
32
32
32
32
F
F
F
F
F
F
LQFP48
LQFP48
LQFP48
LQFP48, HVQFN48
LQFP48, HVQFN48
LQFP48
64K RAM, 128K Flash
32K RAM version of LPC2106/01
16K RAM version of LPC2106/01
Lowest cost, lowest power, ADC
16K Flash, 4K RAM version of LPC2103
8K Flash, 2K RAM version of LPC2103
+
Includes Watchdog timer. ++ Using timers.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
RTC
11**
11**
11**
11**
External bus
interface
5
5
5
5
I/O pins
Available dual 1.8V and 3.3V VDD for HVQFN33 package
Available dual 1.8V and 3.3V VDD for HVQFN33 package
SD/MMC
HVQFN24/33
HVQFN24/33
Comparator
F
F
DAC (10-bit)
channels
1.8
1.8
ADC
channels/
resolution
50
50
I2S
20/27
20/27
SSP/SPI
6/8 b
6/8 b
SPIFI
1
1
CAN
1
1
USB
1
1
Ethernet
11**
11**
PWM
channels++
5
5
State config
timer
Temp. range
options
10
8
6
4
Analog
I2C
2/4
4/8
Serial Interfaces
Package
Standard
Timers+
EEPROM (KB)
Timers
UART
LPC1100LV devices
LPC1112LV
16
LPC1114LV
32
LPC11E00 devices
LPC11E14
32
LPC11E13
24
LPC11E12
16
LPC11E11
8
LPC1200 Devices
LPC1227
128
LPC1226
96
LPC1225
64/80
LPC1224
32/48
LPC1300 devices
LPC1317
64
LPC1316
48
LPC1315
32
LPC1313
32
LPC1311
8
LPC2100
LPC2106/01
128
LPC2105/01
128
LPC2104/01
128
LPC2103
32
LPC2102
16
LPC2101
8
RAM (KB)
Type
Flash (KB)
Memory
LCD controller
LPC Go Cont’d
1
1
1
1
•
•
•
•
•
•
60
60
60
70
70
70
1.8
1.8
1.8
1.8
1.8
1.8
3.3
3.3
3.3
3.3
3.3
3.3
Comment/Special features
LPC Connect
NXP’s LPC Connect microcontrollers add point-to-point connectivity to LPC Go products. Adding a USB or CAN interface to your system has never been easier. LPC Connect products combine
these plug-and-play interfaces with software integrated drivers in on-chip ROM. Get to market faster with these easy-to-use connected microcontrollers. This category includes Cortex-M0,
Cortex-M3 and ARM7 based microcontrollers.
Temp. range options
External bus interface
32K Flash version of LPC11U12
LQFP48
24K Flash version of LPC11U12
LPC11U12
16
6
5
11**
1
1
1
2
8/10 b
26/40
50
3.3
F
LQFP48, HVQFN33
Low cost, low-power Cortex-M0 device with USB, on-chip power profiles
I/O voltage ( V)
HVQFN33, LQFP48, TFBGA48
F
CPU Voltage ( V)
F
3.3
Max freq. (MHz)
3.3
50
RTC
50
40
I/O pins
26/40
8/10 b
SD/MMC
8/10 b
2
LCD controller
2
1
ADC channels/
resolution
1
1
I2S
1
1
SSP/SPI
1
11**
SPIFI
11**
5
CAN
I2C
5
6
Ethernet
6
24
EEPROM (KB)
32
LPC11U13
RAM (KB)
LPC11U14
Type
Flash (KB)
UART
DAC (10-bit) channels
Analog
USB
Serial Interfaces
PWM channels*
Timers
Standard Timers*
Memory
Package
Comment/Special features
LPC11U10 devices
LPC11U20 devices
LPC11U24
32
10
4
5
11**
1
1
2
8/10 b
26/40/54
50
3.3
F
LQFP64, LQFP48, HVQFN33
ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries
LPC11U24
32
8
2
5
11**
1
1
2
8/10 b
26/40
50
3.3
F
HVQFN33 (5x5), TFBGA48, LQFP48
ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries
LPC11U23
24
8
1
5
11**
1
1
2
8/10 b
40
50
3.3
F
LQFP48
ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries
LPC11U30 devices
LPC11U37
128
10/12
4
5
11**
1
1
1
2
8/10 b
40/54
50
3.3
F
LQFP48/64
On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector
LPC11U36
96
10/12
4
5
11**
1
1
1
2
8/10 b
40/54
50
3.3
F
LQFP48/64
On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector
LPC11U35
64
10/12
4
5
11**
1
1
1
2
8/10 b
40/54
50
3.3
F
HVQFN33, LQFP48/64, TFBGA48
On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector, both 7mm x 7mm and 5mm x 5mm HVQFN33 available
LPC11U34
40/48
8/10
4
5
11**
1
1
1
2
8/10 b
26/40
50
3.3
F
HVQFN33, LQFP48
On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector
LPC11C00 devices
LPC11C24
32
8
5
11**
1
1
1
2
8/10 b
36
50
3.3
F
LQFP48
32K Flash version of LPC11C22
LPC11C22
16
8
5
11**
1
1
1
2
8/10 b
36
50
3.3
F
LQFP48
Cortex-M0 MCU with on-chip CAN drivers and integrated CAN tranceiver
LPC11C14
32
8
5
11**
1
1
1
2
8/10 b
42
50
3.3
F
LQFP48
32K Flash version of LPC11C12
LPC11C12
16
8
5
11**
1
1
1
2
8/10 b
42
50
3.3
F
LQFP48
Cortex-M0 MCU with on-chip CAN drivers
LPC11Axx devices
LPC11A14
32
8
4
5
11**
1
1
2
10-b/8
1
28/42
50
3.3
F
HVQFN33, LQFP48
Comparator, VREF, UVLO protection
LPC11A13
24
6
2
5
11**
1
1
2
10-b/8
1
28
50
3.3
F
HVQFN33
Comparator, VREF, UVLO protection
LPC11A12
16
4
1
5
11**
1
1
2
10-b/8
1
28/42
50
3.3
F
HVQFN33, LQFP48
Comparator, VREF, UVLO protection
LPC11A11
8
2
512b
5
11**
1
1
2
10-b/8
1
28
50
3.3
F
HVQFN33
Comparator, VREF, UVLO protection
3.3
LPC11A04
32
8
4
5
11**
1
1
1
10-b/8
1
18
50
LPC11A02
16
4
2
5
11**
1
1
1
10-b/8
1
18
50
F
WLCSP20
Miniature package size, Comparator, VREF, UVLO protection
F
WLCSP20
Comparator, VREF, UVLO protection
LPC134x devices
LPC1347
64
12
4
5
11**
1
1
1
2
8/12 b
28-51
72
3.3
F
LQFP64, LQFP48, HVQFN33
FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface
LPC1346
48
10
4
5
11**
1
1
1
2
8/12 b
28-51
72
3.3
F
LQFP64, LQFP48, HVQFN33
FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface
LPC1345
32
10
4
5
11**
1
1
1
2
8/12 b
28-51
72
3.3
F
LQFP64, LQFP48, HVQFN33
FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface
LPC1343
32
8
5
11**
1
1
1
1
8/10 b
28-42
72
3.3
F
LQFP48, HVQFN33
Low-cost, low-power Cortex-M3 device with FS USB device interface and pre-loaded USB drivers
LPC1342
16
4
5
11**
1
1
1
1
8/10 b
28
72
3.3
F
HVQFN33
16K Flash / 4K RAM version of LPC1343
LPC213x devices
LPC2138/01
512
32
5
6
2
2
2
2x8
1
47
•
60
3.3
F
LQFP64, HVQFN64
Dual 8-ch. 10-bit ADC, BOD, POR, 32-kHz XTAL input, VBAT, fast I/O
LPC2136/01
256
32
5
6
2
2
2
2x8
1
47
•
60
3.3
F
LQFP64
256K Flash version of LPC2138/01
LPC2134/01
128
16
5
6
2
2
2
2x8
1
47
•
60
3.3
F
LQFP64
128K Flash, 16K RAM version of LPC2138/01
LPC2132/01
64
16
5
6
2
2
2
8
1
47
•
60
3.3
F
LQFP64, HVQFN64
64K Flash, 16K RAM version of LPC2138/01, single ADC
LPC2131/01
32
8
5
6
2
2
2
8
47
•
60
3.3
F
LQFP64
32K Flash, 8K RAM version of LPC2138/01, single ADC, no DAC
* SCT peripheral can be configured as additional timers and/or PWM channels.
** Using timers.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC Connect Cont’d
Temp. range options
I/O voltage ( V)
CPU Voltage ( V)
Max freq. (MHz)
RTC
External bus interface
I/O pins
SD/MMC
DAC (10-bit) channels
LCD controller
ADC channels/
resolution
I2S
Analog
SSP/SPI
SPIFI
CAN
I2 C
UART
USB
Serial Interfaces
Ethernet
PWM channels*
Standard Timers*
Timers
EEPROM (KB)
RAM (KB)
Type
Flash (KB)
Memory
Package
Comment/Special features
LPC2138 plus USB 2.0 FS device
LPC214x devices
LPC2148
512
40
5
6
1
2
2
2
8+6/10 b
1
45
•
60
3.3
F
LQFP64
LPC2146
256
40
5
6
1
2
2
2
8+6/10 b
1
45
•
60
3.3
F
LQFP64
LPC2136 plus USB 2.0 FS device
LPC2144
128
16
5
6
1
2
2
2
8+6/10 b
1
45
•
60
3.3
F
LQFP64
LPC2134 plus USB 2.0 FS device
LPC2142
64
16
5
6
1
2
2
2
6/10 b
1
LPC2141
32
8
5
6
1
2
2
2
6/10 b
* SCT peripheral can be configured as additional timers and/or PWM channels.
** Using timers.
45
•
60
3.3
F
LQFP64
LPC2132 plus USB 2.0 FS device
45
•
60
3.3
F
LQFP64
LPC2131 plus USB 2.0 FS device
LPC ConnectPlus
NXP’s LPC ConnectPlus microcontrollers offer a broad range of interfaces and the bandwidth for running these multiple communication protocols simultaneously. Connect to USB plus CAN plus
Ethernet plus LCD and more. LPC ConnectPlus products are offered in a wide range of packages, memories and peripherals and feature pin-compatibility between cores. This category includes
Cortex-M3, Cortex-M4 and ARM7 based microcontrollers.
3
2
3
1
8/12 b
1
1
1
109-165
8-32
1
120
3.3
F
LQFP208, TFBGA208,
TFBGA180, LQFP144
USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package)
1
5
3
2
3
1
8/12 b
1
1
1
165
32
1
120
3.3
F
LQFP208
USB host/OTG/device, QEI
1
5
3
2
3
1
8/12 b
1
1
1
165
32
1
120
3.3
F
LQFP208
USB host/OTG/device, QEI
1
5
3
2
3
1
8/12 b
1
1
1
165
32
1
120
3.3
F
LQFP208
USB Host/OTG/device
USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package)
Temp. range options
6
5
I/O voltage (V)
6
5
1
CPU Voltage (V)
5
4
Max freq. (MHz)
4
80
RTC
80
256
External bus interface
256
LPC1785
I/O pins
LPC1786
SD/MMC
6
LCD controller
5
DAC (10-bit)
channels
4
ADC channels/
resolution
96
I2S**
5125
SSP/SPI**
LPC1787
1
SPIFI
6
CAN
5
I2C**
4
UART**
PWM channels*
96
Analog
USB
Standard Timers*
512
Serial Interfaces
Ethernet
EEPROM (KB)
LPC1788
Type
State Config. Timer
RAM (KB)
Timers
Flash (KB)
Memory
Package
Comment/Special features
LPC17xx devices
LPC1778
512
96
4
5
6
LPC1777
512
96
4
5
6
LPC1776
256
80
4
5
6
LPC1774
128
40
2
5
LPC1773
128
40
2
LPC1769
512
LPC1768
512
LPC1767
1
1
8-32
1
120
3.3
F
LQFP208, TFBGA208,
TFBGA180, LQFP144
165
32
1
120
3.3
F
LQFP208
USB host/OTG/device, QEI
141-165
16-32
1
120
3.3
F
LQFP208, TFBGA180
USB host/OTG/device, QEI
8-32
1
120
3.3
F
LQFP208, LQFP144
USB Device Only, 8/32-bit External Memory Controler (depends on package)
109-165
1
120
3.3
F
LQFP144
USB Device Only
1
70
1
120
3.3
F
LQFP100
FS USB Host/OTG/Device, QEI, Motor Control PWM
1
70
1
100
3.3
F
LQFP100, TFBGA100
FS USB Host/OTG/Device, QEI, Motor Control PWM
8/12 b
1
70
1
100
3.3
F
LQFP100
QEI, Motor Control PWM
1
8/12 b
1
70
1
100
3.3
F
LQFP100
FS USB Host/OTG/Device, QEI, Motor Control PWM
1
8/12 b
1
70
1
100
3.3
F
LQFP100, TFBGA100
FS USB Host/OTG/Device, QEI, Motor Control PWM
1
5
3
2
3
1
8/12 b
1
1
1
5
3
2
3
1
8/12 b
1
1
1
5
3
2
3
1
8/12 b
1
1
6
1
4
3
2
3
1
8/12 b
1
109-165
5
6
1
4
3
2
3
1
8/12 b
1
64
6
6
1
1
4
3
2
2
1
8/12 b
64
6
6
1
1
4
3
2
2
1
8/12 b
512
64
6
6
1
4
3
2
1
LPC1766
256
64
6
6
1
1
4
3
2
2
LPC1765
256
64
6
6
1
4
3
2
2
LPC1764
128
32
6
6
1
4
3
2
2
LPC1763
256
64
6
6
4
3
LPC1759
512
64
6
6
1
4
3
LPC1758
512
64
6
6
1
4
LPC1756
256
32
6
6
1
4
LPC1754
128
32
6
6
1
LPC1752
64
16
6
6
LPC1751
32
8
6
6
1
1
109-165
LPC17xx devices
1
1
70
1
100
3.3
F
LQFP100
FS USB Host/OTG/Device, QEI, Motor Control PWM
2
1
8/12 b
8/12 b
1
70
1
100
3.3
F
LQFP100
QEI, Motor Control PWM
2
2
1
6/12 b
1
52
1
120
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
3
2
2
1
6/12 b
1
52
1
100
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
3
2
2
1
6/12 b
1
52
1
100
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
4
3
1
2
6/12 b
1
52
1
100
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
1
4
3
1
2
6/12 b
52
1
100
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
1
4
3
1
2
6/12 b
52
1
100
3.3
F
LQFP80
FS USB Host/OTG/Device, QEI, Motor Control PWM
* SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I2S, I2C, UART and/or SSP channels.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC ConnectPlus Cont’d
•
72
3.3
F
LQFP144
On-chip 4 MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM USB 2.0 FS device w/ PHY, DMA and 4K RAM; UART
3 w/ IrDA; MiniBus (8-bit)
•
•
72
3.3
F
LQFP144
LPC2378 without USB or CAN
70
•
72
3.3
F
LQFP100, TFBGA100
100-pin version of LPC2378 with USB device, no external bus
70
•
72
3.3
F
LQFP100
LPC2368 without USB or CAN
1
70
•
72
3.3
F
LQFP100
256K Flash version of LPC2368 with USB device, no SD/MMC
6/10 b
1
70
•
72
3.3
F
LQFP100
LPC2366 without USB or CAN
1
6/10 b
1
70
•
72
3.3
F,H
LQFP100 TFBGA100
128K Flash / 34K RAM version of LPC2368 with USB device, no SD/MMC
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
LPC2364 with USB host/OTG/device and more RAM
2
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
64K Flash, USB host/OTG/device and CAN controller
3
2
3
1
8/10 b
1
•
104
•
72
3.3
F
LQFP144
LPC2378 with 98K SRAM and USB host/OTG/device
4
3
2
3
1
6/10 b
1
•
70
•
72
3.3
F
LQFP100
LPC2368 with 98K SRAM and USB host/OTG/device
4
3
2
3
1
8/10 b
1
•
104
•
•
72
3.3
F
LQFP144
On-chip 4 MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM USB 2.0 FS device w/ PHY, DMA and 4K RAM; UART
3 w/ IrDA; MiniBus (8-bit)
4
3
3
1
8/10 b
1
•
104
•
•
72
3.3
F
LQFP144
LPC2378 without USB or CAN
4
3
3
1
6/10 b
1
•
70
•
72
3.3
F
LQFP100, TFBGA100
100-pin version of LPC2378 with USB device, no external bus
4
3
3
1
6/10 b
1
•
70
•
72
3.3
F
LQFP100
LPC2368 without USB or CAN
4
3
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
256K Flash version of LPC2368 with USB device, no SD/MMC
4
3
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
LPC2366 without USB or CAN
1
4
3
2
3
1
6/10 b
1
70
•
72
3.3
F,H
LQFP100 TFBGA100
128K Flash / 34K RAM version of LPC2368 with USB device, no SD/MMC
1
4
3
2
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
LPC2364 with USB host/OTG/device and more RAM
1
4
3
2
3
1
6/10 b
1
70
•
72
3.3
F
LQFP100
64K Flash, USB host/OTG/device and CAN controller
4
3
2
3
1
8/10 b
1
•
104
LPC2387
512
98
6
6
1
1
4
3
2
3
1
6
1
•
70
LPC2378
512
58
6
6
1
1
4
3
2
3
1
8/10 b
1
•
104
LPC2377
512
58
6
6
1
4
3
3
1
8/10 b
1
•
104
LPC2368
512
58
6
6
1
4
3
3
1
6/10 b
1
•
LPC2367
512
58
6
6
1
4
3
3
1
6/10 b
1
•
LPC2366
256
58
6
6
1
4
3
3
1
6/10 b
LPC2365
256
58
6
6
1
4
3
3
1
LPC2364
128
34
6
6
1
1
4
3
2
3
LPC2362
128
58
6
6
1
1
4
3
2
LPC2361
64
34
6
6
1
4
3
LPC2388
512
98
6
6
1
1
4
LPC2387
512
98
6
6
1
1
LPC2378
512
58
6
6
1
1
LPC2377
512
58
6
6
1
LPC2368
512
58
6
6
1
LPC2367
512
58
6
6
1
LPC2366
256
58
6
6
1
LPC2365
256
58
6
6
1
LPC2364
128
34
6
6
1
LPC2362
128
58
6
6
1
LPC2361
64
34
6
6
I/O voltage (V)
1
LCD controller
1
SPIFI
6
EEPROM (KB)
6
Floating Pt Unit
98
M0 Coprocessor
512
Temp. range options
•
LPC2388
Type
CPU Voltage (V)
Max freq. (MHz)
LPC2368 with 98K SRAM and USB host/OTG/device
I/O pins
LQFP100
SD/MMC
F
DAC (10-bit)
channels
3.3
ADC channels/
resolution
72
I2S**
•
SSP/SPI**
LPC2378 with 98K SRAM and USB host/OTG/device
CAN
LQFP144
I2C**
F
UART**
3.3
USB
72
Ethernet
•
PWM channels*
•
Standard Timers*
RTC
Analog
External bus interface
Serial Interfaces
RAM (KB)
State Config. Timer
Timers
Flash (KB)
Memory
Package
Comment/Special features
LPC23xx devices
1
1
2
2
•
LPC23xx devices
1
1
2
2
* SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I S, I2C, UART and/or SSP channels.
2
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC ConnectPlus cont’d
I2C**
CAN
SSP/SPI**
I2S**
ADC channels/
resolution
DAC (10-bit)
channels
LCD controller
SD/MMC
I/O pins
External bus interface
RTC
Max freq. (MHz)
1
2
4
3
2
2
1
8/10 b
1
•
•
160
•
•
72
3.3
F
LPFP208, TFBGA208
LPC2468 with XGA LCD controller, USB device/host/OTG
98
6
12
1
2
4
3
2
2
1
8/10 b
1
•
•
160
•
•
72
3.3
F
LPFP208, TFBGA208
LPC2468 with XGA LCD controller, USB device/host/OTG
98
6
12
1
2
4
3
2
2
1
8/10 b
1
•
160
•
•
72
3.3
F
LPFP208, TFBGA208
On-chip 4-MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM 2 PWM blocks; USB 2.0 FS host/OTG/device, DMA
and 4K RAM; UART 3 w/ IrDA; 32-bit ext. bus
98
6
12
1
2
4
3
2
2
1
8/10 b
1
•
160
•
•
72
3.3
F
LPFP208, TFBGA208
Flashless LPC2468
98
6
12
1
2
4
3
2
2
1
8/10 b
1
•
160
•
•
72
3.3
F
TFBGA180
LPC2468 with 16-bit external memory interface, USB device/host/OTG
82
6
12
2
4
3
2
1
8/10 b
1
•
160
•
•
72
3.3
F
LPFP208, TFBGA208
Flashless USB device/host/OTG controller, USB device/host/OTG
5
6
1
5
3
3
1
8/12 b
1
1
109-165
8-32
1
120
3.3
F
LQFP208, TFBGA208,
TFBGA180, LQFP144
USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package), 2 analog comparators
USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package), 2 analog comparators
I/O voltage (V)
Temp. range options
UART**
12
CPU Voltage (V)
USB
6
SPIFI
Ethernet
98
State Config. Timer
512
EEPROM (KB)
PWM channels*
Analog
Standard Timers*
Serial Interfaces
RAM (KB)
Timers
Flash (KB)
Floating Pt Unit
Type
M0 Coprocessor
Memory
Package
Comment/Special features
LPC24xx devices
LPC2478
LPC2470
LPC2468
512
LPC2460
LPC2458
512
LPC2420
LPC4000 Series
LPC4088
1
512
96
4
1
2
1
1
LPC4078
1
512
96
4
5
6
1
1
5
3
2
1
3
1
8/12 b
1
1
53-165
8-32
1
120
3.3
F
LQFP208, TFBGA208, TFBGA180, LQFP144 , LQFP80
LPC4076
1
256
80
4
5
6
1
1
5
3
2
1
3
1
8/12 b
1
1
109-140
8-16
1
120
3.3
F
TFBGA180, LQFP144
USB host/OTG/device, QEI, 8/16-bit External Memory Controller (depends on package) , 2 analog comparators
LPC4074
128
40
2
5
6
1
4
3
2
1
3
1
8/12 b
1
53-109
8
1
120
3.3
F
LQFP144, LQFP80
USB device, 8-bit External Memory Controller
LPC4072
64
32
2
5
6
1
4
3
2
1
3
1
8/12 b
1
53
8
1
120
3.3
F
TFBGA80, LQFP80
USB device, 8-bit External Memory Controller
* SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I S, I2C, UART and/or SSP channels.
2
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC ConnectTurbo
NXP’s LPC ConnectTurbo microcontrollers include the Industry’s fastest Cortex-M Microcontrollers. This turbo performance is combined with advanced peripherals for solving complex design
challenges. LPC ConnectTurbo innovations include Hi-speed USB with integrated Hi-speed PHY, NXP’s unique SPI Flash Interface (SPIFI), State Configurable Timer (SCT), Serial GPIO and an industry
first dual-core Cortex-M4/M0. All this integration reduces system cost and enables unprecedented embedded performance. This category includes Cortex-M3, Cortex-M4 and ARM9 based
microcontrollers.
I2C**
CAN
SPIFI
SSP/SPI**
I2S**
ADC channels/
resolution
DAC (10-bit) channels
LCD controller
SD/MMC
I/O pins
External bus interface
RTC
Max freq. (MHz)
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
1
146
16-32
1
180
3.3
F and J LQFP208, LBGA256/ TFBGA180
Dual-bank Flash, 1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
1
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
1
146
16-32
1
180
3.3
F and J LQFP208, LBGA256/ TFBGA180
Dual-bank Flash, 1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI. **
5
6
1
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
1
146
16-32
1
180
3.3
I/O voltage (V)
Temp. range options
UART**
1
6
CPU Voltage (V)
USB
6
5
SGPIO
Ethernet
5
16
RAM (KB)
16
512
Flash (KB)
1024 136
LPC1853
Floating Pt Unit
LPC1857
Type
M0 Coprocessor
State Config. Timer
Analog
PWM channels*
Serial Interfaces
Standard Timers*
Timers
EEPROM (KB)
Memory
Package
Comment/Special features
LPC1800 devices
LPC1850
136
200
LPC1837
1024 136
16
5
6
1
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
146
16-32
1
180
3.3
LPC1833
512
16
5
6
1
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
146
16-32
1
180
3.3
5
6
1
1
2
4
2
2
1
3
2
8/10 b (x2)
1
1
146
16-32
1
180
3.3
136
F
LQFP208, LBGA256/ TFBGA180
LQFP144, LBGA256/ TFF and J
BGA180/100
LQFP144, LBGA256/ TFF and J
BGA180/100
LQFP144, LBGA256/ TFF
BGA180/100
1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4
2011 **
Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
LPC1830
200
LPC1827
1024 136
16
5
6
1
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
LPC1825
768
136
16
5
6
1
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
LPC1823
512
104
16
5
6
1
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI.
LPC1822
512
104
16
5
6
1
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
On-chip HS PHY, SPIFI, SCT, RTC, QEI.
5
6
1
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
F
LQFP144, TFBGA100
On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4 2011
On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4 2011
LPC1820
168
LPC1817
1024 136
16
5
6
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, SPIFI, SCT, RTC, QEI.
LPC1815
768
136
16
5
6
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, SPIFI, SCT, RTC, QEI.
LPC1813
512
104
16
5
6
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
Dual-bank Flash, SPIFI, SCT, RTC, QEI.
LPC1812
512
104
16
5
6
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
J
LQFP144, TFBGA100
SPIFI, SCT, RTC, QEI.
5
6
1
4
2
2
1
3
2
8/10 b (x2)
1
1
up to 64
8-16
1
180
3.3
F
LQFP144, TFBGA100
SPIFI, SCT, RTC, QEI. Available Q4 2011
LPC1810
136
LPC4300 Series
LPC4357
1
1 1024 136
16
5
6
1
1
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
1
146
16-32
1
204
3.3
LPC4353
1
1
16
5
6
1
1
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
1
146
16-32
1
204
3.3
1
512
136
LPC4350
1
1
5
6
1
1
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
146
16-32
1
204
3.3
LPC4337
1
1 1024 136
264
16
5
6
1
1
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
146
16-32
1
204
3.3
LPC4333
1
1
16
5
6
1
1
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
146
16-32
1
204
3.3
5
6
1
1
16
5
6
1
512
136
LPC4330
1
1
LPC4327
1
1 1024 136
264
2
4
2
2
1
3
2
1
8/10 b (x2)
1
1
146
16-32
1
204
3.3
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
LQFP208, LBGA256/
TFBGA180
LQFP208, LBGA256/
TFBGA180
LQFP208, LBGA256/
F
TFBGA180
LQFP144, LBGA256/
F and J
TFBGA180/100
LQFP144, LBGA256/
F and J
TFBGA180/100
LQFP144, LBGA256/
F
TFBGA180/100
F and J
F and J
J
LQFP144, TFBGA100
Dual-bank Flash, 1024x768 Color LCD Controller, HS USB PHY, QEI.
Cortex-M4/M0, FPU, Dual-bank Flash, 1024x768 Color LCD Controller, HS USB PHY, SPIFI,
SCT, SGPIO, RTC, QEI.
Cortex-M4/M0, FPU, 1024x768 Color LCD Controller, HS USB PHY, SPIFI,
SCT, SGPIO, RTC, QEI. Available Q4 2011
Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011
Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
LPC4325
1
1
768
136
16
5
6
1
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
LPC4323
1
1
512
104
16
5
6
1
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
* SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I2S, I2C, UART and/or SSP channels.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC ConnectTurbo Cont’d
SD/MMC
I/O pins
External bus interface
RTC
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI.
5
6
1
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
F
LQFP144, TFBGA100
Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011
Temp. range options
DAC (10-bit)
channels
1
I/O voltage (V)
ADC channels/
resolution
1
CPU Voltage (V)
SGPIO
6
Max freq. (MHz)
I2S**
5
PLL
SSP/SPI**
16
LCD controller
SPIFI
200
CAN
1
I2C**
1
UART**
LPC4320
USB
104
Ethernet
512
State Config. Timer
1
Analog
PWM channels*
RAM (KB)
1
Serial Interfaces
Standard Timers*
Flash (KB)
LPC4322
Type
Timers
EEPROM (KB)
Floating Pt Unit
M0 Coprocessor
Memory
Package
Comment/Special features
LPC4300 Series
LPC4317
1
1
1024 136
16
5
6
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI.
LPC4315
1
1
768
136
16
5
6
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI.
LPC4313
1
1
512
104
16
5
6
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI.
512
104
16
LPC4312
1
1
LPC4310
1
1
168
5
6
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
J
LQFP144, TFBGA100
Cortex-M4/M0, FPU, SPIFI, SCT, SGPIO, RTC, QEI.
5
6
1
4
2
2
1
3
2
1
4-6/10 b (x2)
1
1
up to 64
8-16
1
204
3.3
F
LQFP144, TFBGA100
Cortex-M4/M0, FPU, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011
LPC 2900
LPC2939
768
LPC2930
56
16
7
24
2
4
2
2
3
24/10 b
152
•
•
125
1.8
3.3
F
LQFP208
ARM968E-S MCU with USB host/OTG/device, 32K I- & D- TCM, motor control, GP DMA,
16 KB EEPROM
56
16
7
24
2
4
2
2
3
24/10 b
152
•
•
125
1.8
3.3
F
LQFP208
Flashless version of LPC2939
LPC2929
768
56
16
7
24
1
4
2
2
3
24/10 b
104
•
•
125
1.8
3.3
F
LQFP144
LPC2939 with 144 pins and without USB host
LPC2927
512
56
16
7
24
1
4
2
2
3
24/10 b
104
•
•
125
1.8
3.3
F
LQFP144
LPC2929 with 512K Flash, USB device/OTG
LPC2926
256
56
16
7
24
1
4
2
2
3
24/10 b
104
•
125
1.8
3.3
F
LQFP144
LPC2927 with 256K Flash
LPC2925
512
40
16
7
24
1
4
2
2
3
16/10 b
60
•
125
1.8
3.3
F
LQFP100
LPC2923
256
24
16
7
24
1
4
2
2
3
16/10 b
60
•
125
1.8
3.3
F
LQFP100
LPC2925 with 256K Flash
LPC2921
128
24
16
7
24
1
4
2
2
3
16/10 b
60
•
125
1.8
3.3
F
LQFP100
LPC2923 with 128K Flash, USB device
LPC2919/01
768
56
16
7
24
4
2
2
3
16/10 b
108
•
•
125
1.8
3.3
F
LQFP144
ARM968E-S MCU with 2 LIN master controllers, 16K I-TCM, 16K D-TCM
LPC2917/01
521
56
16
7
24
4
2
2
3
16/10 b
108
•
•
125
1.8
3.3
F
LQFP144
LPC2919/01 with 512K Flash
* Includes Watchdog timer and real-time clock. ** Using timers 0-3.
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
LPC Command
NXP’s LPC Command application processors provide an ideal low-cost platform for running the Linux operating system. Based on the ARM9 core, LPC Command products provide an extensive set of
peripherals and are designed for general purpose and specialty embedded applications such as high-speed document printers/scanners, industrial control, and motor control. This category includes
ARM9 based microcontrollers.
I2S
ADC channels/
resolution
LCD controller
SD/MMC
I/O pins
External bus interface
PLL
Max freq. (MHz)
CPU Voltage (V)
I/O voltage (V)
Temp. range options
1
3
2
3/10 b
•
•
157
•
•
180
1.2
1.8/2.8/3.3
F
TFBGA208
LPC3152 with a Decryption Engine & Secure Boot
LPC3152
192
4
1
1
1
1
3
2
3/10 b
•
•
157
•
•
180
1.2
1.8/2.8/3.3
F
TFBGA208
Stereo CODEC with Class-AB headphone amplifier, power supply unit, battery charger, unique
ID, OTP, HS USB 2.0 OTG with on-chip PHY, NAND Flash controller, MMC/SDHC/SDIO/CE-ATA,
6800/8080/serial LCD interface
LPC3143
192
4
1
1
1
2
4
2
4/10 b
•
•
97
•
•
270
1.2
1.8/2.8/3.3
F
TFBGA180
LPC3141 with a Decryption Engine & Secure Boot
LPC3141
192
4
1
1
1
2
4
2
4/10 b
•
•
97
•
•
270
1.2
1.8/2.8/3.3
F
TFBGA180
HS USB 2.0 OTG with on-chip PHY, NAND Flash controller, MMC/SDHC/SDIO/CE-ATA, 6800/8080
LCD interface, random number generator, unique ID, OTP
LPC3131
192
4
1
1
1
2
4
2
4/10 b
•
•
97
•
•
180
1.2
1.8/2.8/3.3
F
TFBGA180
LPC3130 with 192K SRAM, HS USB host/OTG/device
LPC3130
96
4
1
1
1
2
4
2
4/10 b
•
•
97
•
•
180
1.2
1.8/2.8/3.3
F
TFBGA180
HS USB 2.0 host/OTG/device with on-chip PHY, NAND Flash controller with 8-bit ECC, MMC/SDHC/
SDIO/CE-ATA, 6800/8080/serial LCD interface, random number generator
LPC3180/01
64
4
1
1
7
2
3
•
55
•
•
208
1.2
1.8/2.8/3.0
F
LFBGA320
VFP unit, NAND Flash, SDRAM/DDR, USB 2.0 FS host/OTG device
256
8
11
1
7
2
•
87
•
•
1.8/2.8/3.0
F
LFBGA296
VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, 24-bit color LCD controler
and touchscreen controller, keypad interface, and 0.9 V low-power mode
DAC (10-bit)
channels
SSP/SPI
1
SPFI
1
CAN
I2C
1
Ethernet
4
EEPROM (KB)
192
RAM (KB)
LPC3154
Type
Flash (KB)
UART
Analog
USB
Serial Interfaces
PWM channels
Timers
Standard Timers
Memory
Package
Comment/Special features
LPC3100
3/10 b
LPC3200
LPC3250
LPC3240
256
8
11
LPC3230
256
8
LPC3220
128
8
Temp. range options
F= -40 to +85 C
J= -40 to +105 C
1
1
2
2
2
3/10 b
1
7
2
2
2
2
3/10 b
11
1
7
2
2
2
2
3/10 b
11
1
7
2
2
2
2
3/10 b
•
•
266/208 1.35/1.2
•
87
•
•
266/208 1.35/1.2
1.8/2.8/3.0
F
LFBGA296
VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, keypad interface, and
0.9 V low-power mode
•
87
•
•
266/208 1.35/1.2
1.8/2.8/3.0
F
LFBGA296
VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, 24-bit color LCD controler
and touchscreen controller, keypad interface, and 0.9 V low-power mode
•
87
•
•
266/208 1.35/1.2
1.8/2.8/3.0
F
LFBGA296
VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, keypad interface, and
0.9 V low-power mode
Need devices, support, or development tools?
For a list of sales offices and distributors near you, please visit www.nxp.com/profile/sales/index.html
For general support, please visit www.nxp.com/microcontrollers
For tools, evaluation boards, or development support, please visit www.nxp.com
www.nxp.com
© 2012 NXP Semiconductors N.V.
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The
Date of release: November 2012
information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and
Document order number: 9397 750 17327
may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof
Printed in the Netherlands
does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Similar pages