IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G OptiMOS®2 Power-Transistor Product Summary Features • N-channel, normal level • Excellent gate charge x R DS(on) product (FOM) V DS 100 V R DS(on),max (TO252) 78 mΩ ID 13 A • Very low on-resistance R DS(on) • 175 °C operating temperature • Pb-free lead plating; RoHS compliant • Qualified according to JEDEC1) for target application • Ideal for high-frequency switching and synchronous rectification Type IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G Package PG-TO263-3 PG-TO252-3 PG-TO262-3 PG-TO220-3 PG-TO251-3 Marking 80CN10N 78CN10N 80CN10N 80CN10N 78CN10N Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Continuous drain current ID Value T C=25 °C 13 T C=100 °C 9 Unit A Pulsed drain current2) I D,pulse T C=25 °C 52 Avalanche energy, single pulse E AS I D=13 A, R GS=25 Ω 17 mJ Reverse diode dv /dt dv /dt I D=13 A, V DS=80 V, di /dt =100 A/µs, T j,max=175 °C 6 kV/µs Gate source voltage3) V GS Power dissipation P tot Operating and storage temperature T j, T stg T C=25 °C IEC climatic category; DIN IEC 68-1 1) ±20 V 31 W -55 ... 175 °C 55/175/56 J-STD20 and JESD22 2) see figure 3 3) Tjmax=150°C and duty cycle D=0.01 for Vgs<-5V Rev. 1.01 page 1 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G Parameter Values Symbol Conditions Unit min. typ. max. - - 4.9 minimal footprint - - 62 6 cm2 cooling area4) - - 40 minimal footprint - - 75 6 cm2 cooling area4) - - 50 100 - - Thermal characteristics Thermal resistance, junction - case R thJC Thermal resistance, junction ambient (TO220, TO262, TO263) R thJA Thermal resistance, junction ambient (TO252, TO251) K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA Gate threshold voltage V GS(th) V DS=V GS, I D=12 µA 2 3 4 Zero gate voltage drain current I DSS V DS=80 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=80 V, V GS=0 V, T j=125 °C - 10 100 V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 1 100 nA Drain-source on-state resistance R DS(on) V GS=10 V, I D=13 A, (TO252) - 59 78 mΩ V GS=10 V, I D=13 A, (TO251) - 59 78 V GS=10 V, I D=13 A, (TO263) - 61 80 V GS=10 V, I D=13 A, (TO220, TO262) - 61 80 - 0.8 - Ω 7 13 - S Gate resistance RG Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=13 A 4) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm 2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.01 page 2 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G Parameter Values Symbol Conditions Unit min. typ. max. - 538 716 - 76 101 Dynamic characteristics Input capacitance C iss Output capacitance C oss Reverse transfer capacitance C rss - 8 12 Turn-on delay time t d(on) - 9 13 Rise time tr - 4 6 Turn-off delay time t d(off) - 13 18 Fall time tf - 3 4 Gate to source charge Q gs - 3 4 Gate to drain charge Q gd - 2 3 Switching charge Q sw - 3 5 Gate charge total Qg - 8 11 Gate plateau voltage V plateau - 5.7 - Output charge Q oss - 8 10 nC - - 13 A - - 52 - 1 1.2 V - 67 - ns - 114 - nC V GS=0 V, V DS=50 V, f =1 MHz V DD=50 V, V GS=10 V, I D=13 A, R G=2.4 Ω pF ns Gate Charge Characteristics5) V DD=50 V, I D=13 A, V GS=0 to 10 V V DD=50 V, V GS=0 V nC V Reverse Diode Diode continous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD Reverse recovery time t rr Reverse recovery charge Q rr 5) T C=25 °C V GS=0 V, I F=13 A, T j=25 °C V R=50 V, I F=I S, di F/dt =100 A/µs See figure 16 for gate charge parameter definition Rev. 1.01 page 3 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G 1 Power dissipation 2 Drain current P tot=f(T C) I D=f(T C); V GS≥10 V 40 15 30 I D [A] P tot [W] 10 20 5 10 0 0 0 50 100 150 0 200 50 T C [°C] 100 150 200 T C [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 102 10 1 µs 10 µs 0.5 Z thJC [K/W] 100 µs 101 I D [A] 1 ms 0.2 1 0.1 0.05 100 10 ms 0.02 DC 0.01 single pulse 10-1 0.1 -1 10 0 10 1 10 2 10 3 10 t p [s] V DS [V] Rev. 1.01 page 4 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 60 200 180 160 10 V 140 40 5V R DS(on) [mΩ] I D [A] 8V 7V 5.5 V 6V 6.5 V 7V 120 100 80 8V 6.5 V 20 10 V 60 6V 40 5.5 V 20 5V 4.5 V 0 0 1 2 0 3 4 5 0 10 20 V DS [V] 30 40 I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 30 20 25 15 g fs [S] I D [A] 20 15 10 10 175 °C 5 25 °C 5 0 0 0 2 4 6 8 Rev. 1.01 0 10 20 30 I D [A] V GS [V] page 5 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=13 A; V GS=10 V V GS(th)=f(T j); V GS=V DS parameter: I D 180 4 160 3.5 140 120 µA 3 12 µA 2.5 100 V GS(th) [V] R DS(on) [mΩ] 120 98 % 80 typ 2 1.5 60 1 40 0.5 20 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 103 100 Ciss 25 °C 175 °C 175 °C, 98% Coss 102 I F [A] C [pF] 10 Crss 101 1 100 0.1 0 20 40 60 80 0 0.5 1 1.5 2 V SD [V] V DS [V] Rev. 1.01 25 °C, 98% page 6 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=13 A pulsed parameter: T j(start) parameter: V DD 100 12 50 V 10 80 V 20 V V GS [V] I AS [A] 8 10 6 4 25 °C 100 °C 150 °C 2 1 0 1 10 100 1000 0 2 4 6 8 10 Q gate [nC] t AV [µs] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 115 V GS Qg V BR(DSS) [V] 110 105 V g s(th) 100 95 Q g (th) Q sw Q gs 90 -60 -20 20 60 100 140 Q gate Q gd 180 T j [°C] Rev. 1.01 page 7 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G PG-TO220-3: Outline Rev. 1.01 page 8 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G PG-TO-263 (D²-Pak) Rev. 1.01 page 9 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G Rev. 1.01 page 10 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G PG-TO252-3: Outline Rev. 1.01 page 11 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G PG-TO251-3: Outline Rev. 1.01 page 12 2006-06-02 IPB80CN10N G IPD78CN10N G IPI80CN10N G IPP80CN10N G IPU78CN10N G Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2006. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com ). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.01 page 13 2006-06-02