Maxim MAX9943 High-voltage, precision, low-power op amps rail-to-rail output Datasheet

19-4433; Rev 3; 4/11
High-Voltage, Precision, Low-Power Op Amps
The MAX9943/MAX9944 is a family of high-voltage
amplifiers that offers precision, low drift, and low-power
consumption.
The MAX9943 (single) and MAX9944 (dual) op amps
offer 2.4MHz of gain-bandwidth product with only
550μA of supply current per amplifier.
The MAX9943/MAX9944 family has a wide power supply range operating from ±3V to ±19V dual supplies or
a 6V to 38V single supply.
The MAX9943/MAX9944 is ideal for sensor signal conditioning, high-performance industrial instrumentation and
loop-powered systems (e.g., 4mA–20mA transmitters).
The MAX9943 is offered in a space-saving 6-pin TDFN or
8-pin μMAX® package. The MAX9944 is offered in an
8-pin SO or an 8-pin TDFN package. These devices are
specified over the -40°C to +125°C automotive temperature range.
Features
o Wide 6V to 38V Supply Range
o Low 100µV (max) Input Offset Voltage
o Low 0.4µV/°C Offset Drift
o Unity Gain Stable with 1nF Load Capacitance
o 2.4MHz Gain-Bandwidth Product
o 550µA Supply Current
o 20mA Output Current
o Rail-to-Rail Output
o Package Options
3mm x 5mm, 8-Pin µMAX or 3mm x 3mm, 6-Pin
TDFN Packages (Single)
5mm x 6mm, 8-Pin SO or 3mm x 3mm, 8-Pin
TDFN Packages (Dual)
Ordering Information
Applications
PINPACKAGE
TOP
MARK
8 μMAX
AACA
PART
TEMP RANGE
Loop-Powered Systems
MAX9943AUA+
-40°C to +125°C
Industrial Instrumentation
MAX9943ATT+
-40°C to +125°C
6 TDFN-EP*
High-Voltage ATE
MAX9944ASA+
-40°C to +125°C
8 SO
High-Performance ADC/DAC Input/Output
Amplifiers
MAX9944ATA+
-40°C to +125°C
8 TDFN-EP*
Sensor Interfaces
μMAX is a registered trademark of Maxim Integrated Products, Inc.
MAX9943 toc17
UNSTABLE
CLOAD (pF)
10,000
1000
—
BLN
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
Package Detail
Capacitive Load vs. Resistive Load
100,000
AUF
TOP VIEW
MAX9943
OUT
1
VEE
IN+
*EP
6
VCC
2
5
N.C.
3
4
IN-
STABLE
100
100
1000
10,000
100,000
RLOAD (Ω)
TOP VIEW
6 TDFN-EP
*EP = EXPOSED PAD.
Pin Configurations appear at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
MAX9943/MAX9944
General Description
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC to VEE) ..................................-0.3V to +40V
All Other Pins (Note 1) .....................(VEE - 0.3V) to (VCC + 0.3V)
OUT Short-Circuit Current Duration
8-Pin μMAX (VCC - VEE ≤ 20V)...............................................3s
8-Pin μMAX (VCC - VEE > 20V) ................................Momentary
6-Pin TDFN (VCC - VEE ≤ 20V) .............................................60s
6-Pin TDFN (VCC - VEE > 20V)...............................................2s
8-Pin SO (VCC - VEE ≤ 20V) .................................................60s
8-Pin SO (VCC - VEE > 20V)...................................................2s
8-Pin TDFN (VCC - VEE ≤ 20V) .............................................60s
8-Pin TDFN (VCC - VEE > 20V)...............................................2s
Continuous Input Current (Any Pins) ................................±20mA
Thermal Limits (Note 2)
Multiple Layer PCB
Continuous Power Dissipation (TA = +70°C)
8-Pin μMAX (derate 4.8mW/°C above +70°C) ...........387.8mW
6-Pin TDFN-EP (derate 23.8mW/°C above +70°C) ..1904.8mW
8-Pin SO (derate 7.6mW/°C above +70°C)...................606.1W
8-Pin TDFN-EP (derate 24.4mW/°C above +70°C) ..1951.2mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Note 1: Operation is limited by thermal limits.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 2)
8 μMAX
Junction-to-Ambient Thermal Resistance (θJA)......206.3°C/W
Junction-to-Ambient Case Resistance (θJC) ...............42°C/W
6 TDFN-EP
Junction-to-Ambient Thermal Resistance (θJA)...........42°C/W
Junction-to-Ambient Case Resistance (θJC) .................9°C/W
8 SO
Junction-to-Ambient Thermal Resistance (θJA).........132°C/W
Junction-to-Ambient Case Resistance (θJC) ...............38°C/W
8 TDFN-EP
Junction-to-Ambient Thermal Resistance (θJA)...........41°C/W
Junction-to-Ambient Case Resistance (θJC) .................8°C/W
Note 2: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS
(VCC = 15V, VEE = -15V, VCM = 0V, RL = 10kΩ to GND, VGND = 0V, TA = -40°C to +125°C. Typical values are at TA = +25°C, unless
otherwise noted.) (Note 3)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
±19
V
950
μA
DC CHARACTERISTICS
Operating Supply Voltage Range
VSUPPLY
Quiescent Supply Current per
Amplifier
ICC
Power-Supply Rejection Ratio
PSRR
Input Offset Voltage
Input Offset Voltage Drift
Input Bias Current
VOS
IBIAS
IOS
Input Voltage Range
VIN+ , VIN-
2
±3
550
VS = ±3V to ±19V
105
TA = +25°C
CMRR
130
20
TA = -40°C to +125°C
dB
100
240
TCVOS
Input Offset Current
Common-Mode Rejection Ratio
Guaranteed by PSRR test
0.4
VEE + 0.3V ≤ VCM ≤ VCC - 1.8V
4
VEE ≤ VCM ≤ VCC - 1.8V
μV/°C
20
90
VEE ≤ VCM ≤ VCC - 1.8V
1
Guaranteed by CMRR test,
TA = -40°C to +125°C
VEE
VEE + 0.3V ≤ VCM ≤ VCC - 1.8V
105
VEE ≤ VCM ≤ VCC - 1.8V
105
125
_______________________________________________________________________________________
μV
nA
10
nA
VCC 1.8
V
dB
High-Voltage, Precision, Low-Power Op Amps
(VCC = 15V, VEE = -15V, VCM = 0V, RL = 10kΩ to GND, VGND = 0V, TA = -40°C to +125°C. Typical values are at TA = +25°C, unless
otherwise noted.) (Note 3)
PARAMETER
Open-Loop Gain
SYMBOL
AVOL
CONDITIONS
MIN
TYP
-13.5V ≤ VO ≤ +13.5V, RL = 10kΩ,
TA = +25°C
115
130
-13.5V ≤ VO ≤ +13.5V, RL = 10kΩ,
TA = -40°C to +125°C
100
-12V ≤ VO ≤ +12V, RL = 600Ω,
TA = +25°C
100
-12V ≤ VO ≤ +12V, RL = 600Ω,
TA = -40°C to +85°C
90
RL = 600Ω
TA = +25°C
TA = -40°C to +85°C
Output Voltage Swing
dB
110
VCC 1.8
VCC - 2
VEE +
0.1
VEE +
1
VEE +
1.1
RL = 10kΩ
TA = +25°C
VOL
RL = 600Ω
TA = -40°C to +85°C
Short-Circuit Current
ISC
UNITS
VCC 0.2
RL = 10kΩ
VOH
MAX
TA = +25°C
60
TA = -40°C to +125°C
100
V
mA
AC CHARACTERISTICS
Gain Bandwidth Product
GBWP
2.4
MHz
Slew Rate
SR
-5V ≤ VOUT ≤ +5V
0.35
V/μs
Input Voltage Noise Density
en
f = 1kHz
17.6
nV/√Hz
TOTAL NOISE 0.1Hz ≤ f ≤ 10Hz
Input Voltage Noise
Input Current Noise Density
Capacitive Loading
In
CLOAD
500
nVP-P
f = 1kHz
0.18
pA/√Hz
No sustained oscillation
1000
pF
Note 3: All devices are 100% production tested at TA = +25°C. Temperature limits are guaranteed by design.
_______________________________________________________________________________________
3
MAX9943/MAX9944
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(VCC = 15V, VEE = -15V, VCM = 0V, RL = 10kΩ to GND, VGND = 0V, TA = +25°C, unless otherwise noted.)
INPUT VOLTAGE OFFSET
DRIFT HISTOGRAM
10
650
SUPPLY CURRENT (µA)
15
700
MAX9943 toc02
60
FREQUENCY (%)
20
SUPPLY CURRENT vs. SUPPLY VOLTAGE
70
MAX9943 toc01
25
50
40
30
20
5
6
10
14
18
22
500
MAX9943 toc05
25
OFFSET VOLTAGE (µV)
600
400
20
15
10
5
0
300
-50
-25
0
25
50
75
100
6
125
10
14
18
22
26
30
34
38
SUPPLY VOLTAGE (V)
TEMPERATURE (°C)
OFFSET VOLTAGE
vs. COMMON-MODE VOLTAGE
OFFSET VOLTAGE vs. TEMPERATURE
80
OFFSET VOLTAGE (µV)
25
20
15
10
5
MAX9943 toc07
100
MAX9943 toc06
30
60
40
20
0
-20
0
-40
-14
-10
-6
-2
2
6
COMMON-MODE VOLTAGE (V)
10
14
-50
-25
26
SUPPLY VOLTAGE (V)
30
MAX9943 toc04
700
SUPPLY CURRENT (µA)
450
OFFSET VOLTAGE vs. SUPPLY VOLTAGE
SUPPLY CURRENT vs. TEMPERATURE
OFFSET VOLTAGE (µV)
500
300
-0.3 -0.2 -0.1
0
0.1
0.2
0.3
-0.25 -0.15 -0.05 0.05 0.15 0.25
VOS DRIFT (µV/°C)
800
4
550
350
0
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60
OFFSET VOLTAGE (µV)
600
400
10
0
MAX9943 toc03
OFFSET VOLTAGE HISTOGRAM
FREQUENCY (%)
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
0
25
50
75
100
125
TEMPERATURE (°C)
_______________________________________________________________________________________
30
34
38
High-Voltage, Precision, Low-Power Op Amps
INPUT BIAS CURRENT
vs. SUPPLY VOLTAGE
INPUT BIAS CURRENT
vs. COMMON-MODE VOLTAGE
2.0
1.5
1.0
0.5
2.0
1.5
1.0
0.5
0
0
-10
-6
-2
2
6
10
6
14
10
14
22
26
30
34
SUPPLY VOLTAGE (V)
COMMON-MODE REJECTION
RATIO vs. FREQUENCY
POWER-SUPPLY REJECTION
RATIO vs. FREQUENCY
160
MAX9943 toc10
140
130
140
120
110
100
PSRR (dB)
120
100
60
80
40
70
20
0.1
1
10
100
0
0.001 0.01
1000 10,000
1
10
100
1000 10,000
VOL vs. OUTPUT CURRENT
VOH vs. OUTPUT CURRENT
OUTPUT VOLTAGE (V)
TA = -40°C
TA = +25°C
14
TA = +85°C
TA = +125°C
MAX9943 toc13
-12
MAX9943 toc12
16
13
0.1
FREQUENCY (kHz)
FREQUENCY (kHz)
15
38
80
90
60
0.001 0.01
OUTPUT VOLTAGE (V)
18
COMMON-MODE VOLTAGE (V)
MAX9943 toc11
-14
CMRR (dB)
MAX9943 toc09
2.5
INPUT BIAS CURRENT (nA)
2.5
INPUT BIAS CURRENT (nA)
3.0
MAX9943 toc08
3.0
-13
TA = +85°C
-14
TA = -40°C
-15
12
TA = +125°C
TA = +25°C
-16
0
5
10
15
20
OUTPUT CURRENT (mA)
25
30
0
5
10
15
20
25
30
OUTPUT CURRENT (mA)
_______________________________________________________________________________________
5
MAX9943/MAX9944
Typical Operating Characteristics (continued)
(VCC = 15V, VEE = -15V, VCM = 0V, RL = 10kΩ to GND, VGND = 0V, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 15V, VEE = -15V, VCM = 0V, RL = 10kΩ to GND, VGND = 0V, TA = +25°C, unless otherwise noted.)
INPUT VOLTAGE NOISE
vs. FREQUENCY
OUTPUT IMPEDANCE vs. FREQUENCY
10
1
0.1
MAX9943 toc15
MAX9943 toc14
100
100
90
INPUT VOLTAGE NOISE (nV/√Hz)
OUTPUT IMPEDANCE (Ω)
1000
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
1000
1
10,000
10
100
1000
10,000 100,000
FREQUENCY (Hz)
FREQUENCY (kHz)
OPEN-LOOP GAIN vs. FREQUENCY
CAPACITIVE LOAD vs. RESISTIVE LOAD
120
100,000
MAX9943 toc17
MAX9943 toc16
140
100
UNSTABLE
10,000
80
CLOAD (pF)
OPEN-LOOP GAIN (dB)
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
60
40
1000
STABLE
20
0
-20
10
0.001
0.1
0.00001
1000
10,000
1
0.0001
100
0.01
FREQUENCY (kHz)
100
100
1000
10,000
100,000
RLOAD (Ω)
LARGE SIGNAL-STEP RESPONSE
SMALL SIGNAL-STEP RESPONSE
MAX9943 toc19
MAX9943 toc18
1V/div
20mV/div
OUT
OUT
1μs/div
6
10μs/div
_______________________________________________________________________________________
High-Voltage, Precision, Low-Power Op Amps
MAX9943
6 TDFN-EP
MAX9943
8 µMAX
MAX9944
8 SO/TDFN-EP
NAME
FUNCTION
1
6
—
OUT
—
—
1
OUTA
Output
—
—
7
OUTB
2
4
4
VEE
Negative Power Supply. Bypass with a 0.1μF capacitor to ground.
3
3
—
IN+
Positive Input
—
—
3
INA+
—
—
5
INB+
Positive Input B
4
2
—
IN-
Negative Input
—
—
2
INA-
—
—
6
INB-
Negative Input B
5
1, 5, 8
—
N.C.
No Connection
6
7
8
VCC
Positive Power Supply. Bypass with a 0.1μF capacitor to ground.
—
—
—
EP
Output A
Output B
Positive Input A
Negative Input A
Exposed Pad (TDFN Only). Connect to a large VEE plane to maximize
thermal performance. Not intended as an electrical connection point.
Detailed Description
The MAX9943/MAX9944 are single/dual operational
amplifiers designed for industrial applications. They
operate from 6V to 38V supply range while maintaining
excellent performance. These devices utilize a threestage architecture optimized for low offset voltage and
low input noise with only 550μA supply current. The
devices are unity gain stable with a 1nF capacitive
load. These well-matched devices guarantee the high
open-loop gain, CMRR, PSRR, and low voltage offset.
The MAX9943/MAX9944 provide a wide input/output
voltage range. The input terminals of the MAX9943/
MAX9944 are protected from excessive differential voltage with back-to-back diodes. The input signal current
is also limited by an internal series resistor. With a 40V
differential voltage, the input current is limited to 20mA.
The output can swing to the negative rail while delivering 20mA of current, which is ideal for loop-powered
system applications. The specifications and operation
of the MAX9943/MAX9944 family is guaranteed over the
-40°C to +125°C temperature range.
Application Information
Bias Current vs. Input Common Mode
The MAX9943/MAX9944 use an internal bias current
cancellation circuit to achieve very low bias current over
a wide input common-mode range. For such a circuit to
function properly, the input common mode must be at
least 300mV away from the negative supply VEE. The
input common mode can reach the negative supply
VEE. However, in the region between VEE and VEE +
0.3V, there is an increase in bias current for both inputs.
Capacitive Load Stability
Driving large capacitive loads can cause instability in
many op amps. The MAX9943/MAX9944 are stable with
capacitive loads up to 1nF. The Capacitive Load vs.
Resistive Load graph in the Typical Operating
Characteristics gives the stable operation region for
capacitive versus resistive loads. Stability with higher
capacitive loads can be improved by adding an isolation resistor in series with the op-amp output, as shown
in Figure 1. This resistor improves the circuit’s phase
margin by isolating the load capacitor from the amplifier’s output.
_______________________________________________________________________________________
7
MAX9943/MAX9944
Pin Description
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
Power Supplies and Layout
The MAX9943/MAX9944 can operate with dual supplies
from ±3V to ±19V or with a single supply from +6V to
+38V with respect to ground. When used with dual supplies, bypass both VCC and VEE with their own 0.1μF
capacitor to ground. When used with a single supply,
bypass VCC with a 0.1μF capacitor to ground. Careful
layout technique helps optimize performance by
decreasing the amount of stray capacitance at the op
amp’s inputs and outputs. To decrease stray capacitance, minimize trace lengths by placing external components close to the op amp’s pins.
RISO
OUTPUT
MAX9943
CL
INPUT
Figure 1. Capacitive Load Driving Circuit
Output Current Capability
The MAX9943/MAX9944 are capable of driving heavy
loads such as the ones that can be found in loop-powered systems for remote sensors. The information is
transmitted through ±20mA or 4mA–20mA current output
across long lines that are terminated with low resistance
loads (e.g., 600Ω). The Typical Application Circuit shows
the MAX9944 used as a voltage-to-current converter with
a current-sense amplifier in the feedback loop. Because
of the high output current capability of the MAX9944, the
device can be used to directly drive the current-loop.
Figure 2. Input Protection Circuit
The specifications and operation of the MAX9943/
MAX9944 family is guaranteed over the -40°C to
+125°C temperature range, However, when used in
applications with ±15V supply voltage (see Figure 3),
the capability of driving more than ±20mA of current is
limited to the -40°C to +85°C temperature range. Use a
lower supply voltage if this current must be delivered at
a higher temperature range.
During normal op-amp operation, the inverting and noninverting inputs of the MAX9943/MAX9944 are at essentially the same voltage. However, either due to fast
input voltage transients or due to other fault conditions,
these pins can be forced to be at two different voltages.
Input Common Mode and Output Swing
The MAX9943/MAX9944 input common-mode range
can swing to the negative rail VEE. The output voltage
can swing to both the positive VCC and the negative
VEE rails if the output stage is not heavily loaded. These
two features are very important for applications where
the MAX9943/ MAX9944 are used with a single-supply
(VEE connected to ground). One of the applications that
can benefit from these features is when the single-supply op amp is driving an ADC.
8
1.5kΩ
1.5kΩ
Input Differential Voltage Protection
Internal back-to-back diodes and series resistors protect the inputs from an excessive differential voltage
(see Figure 2). Therefore, IN+ and IN- can be any voltage within the range shown in the absolute maximum
rating. Note the protection time is still dependent on the
package thermal limits.
Chip Information
PROCESS: BiCMOS
_______________________________________________________________________________________
High-Voltage, Precision, Low-Power Op Amps
MAX9943/MAX9944
+15V
-15V
VREF
RSENSE
DAC
MAX9944
RLOAD
-15V
Figure 3. Typical ±20mA Current-Source in Loop-Powered Systems
_______________________________________________________________________________________
9
High-Voltage, Precision, Low-Power Op Amps
MAX9943/MAX9944
Pin Configurations
TOP VIEW
MAX9944
MAX9943
+
+
N.C.
1
8
N.C.
IN-
2
7
IN+
3
VEE 4
OUTA
1
8
VCC
VCC
INA- 2
7
OUTB
6
OUT
INA+
3
6
INB-
5
N.C.
VEE 4
5
INB+
1
8
VCC
INA- 2
7
OUTB
INA+
6
INB-
5
INB+
8 μMAX
8 SO
TOP VIEW
MAX9944
MAX9943
+
OUT
1
VEE
2
IN+
*EP
3
6
VCC
5
N.C.
4
TOP VIEW
6 TDFN
IN-
OUTA
3
VEE 4
*EP
TOP VIEW
8 TDFN
NOT TO SCALE.
*EP = EXPOSED PAD.
10
______________________________________________________________________________________
High-Voltage, Precision, Low-Power Op Amps
PACKAGE TYPE
PACKAGE CODE
OUTLINE NO.
LAND PATTERN NO.
8 μMAX
U8+1
21-0036
90-0092
6 TDFN-EP
T633+2
21-0137
90-0058
8 SO
S8+4
21-0041
90-0096
8 TDFN-EP
T833+2
21-0137
90-0059
α
α
______________________________________________________________________________________
11
MAX9943/MAX9944
Package Information
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
12
______________________________________________________________________________________
High-Voltage, Precision, Low-Power Op Amps
COMMON DIMENSIONS
PACKAGE VARIATIONS
MIN.
MAX.
PKG. CODE
N
D2
E2
e
JEDEC SPEC
b
A
0.70
0.80
T633-2
6
1.50±0.10
2.30±0.10
0.95 BSC
MO229 / WEEA
0.40±0.05
1.90 REF
D
2.90
3.10
T833-2
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
E
2.90
3.10
T833-3
8
1.50±0.10
2.30±0.10
0.65 BSC
MO229 / WEEC
0.30±0.05
1.95 REF
2.00 REF
SYMBOL
[(N/2)-1] x e
A1
0.00
0.05
T1033-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
L
0.20
0.40
T1033MK-1
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
10
1.50±0.10
2.30±0.10
0.50 BSC
MO229 / WEED-3
0.25±0.05
2.00 REF
k
0.25 MIN.
T1033-2
A2
0.20 REF.
T1433-1
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-2
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
T1433-3F
14
1.70±0.10
2.30±0.10
0.40 BSC
----
0.20±0.05
2.40 REF
______________________________________________________________________________________
13
MAX9943/MAX9944
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
MAX9943/MAX9944
High-Voltage, Precision, Low-Power Op Amps
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.
14
______________________________________________________________________________________
High-Voltage, Precision, Low-Power Op Amps
REVISION
NUMBER
REVISION
DATE
DESCRIPTION
0
3/09
Initial release
1
4/09
Removed future product reference for the MAX9944, updated EC table
2
6/09
Corrected TOC 13 and added rail-to-rail output feature
3
4/11
Updated Pin Description section
PAGES
CHANGED
—
1, 2
1, 3, 5, 8
7
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15
© 2011 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX9943/MAX9944
Revision History
Similar pages