Kingbright APJA2107CGCK 2.1x0.7mm right angle smd chip led lamp Datasheet

2.1x0.7mm RIGHT ANGLE SMD CHIP LED
LAMP
APJA2107CGCK
Features
GREEN
Description
2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm
The Green source color devices are made with InGaAlP on
THICKNESS.
GaAs substrate Light Emitting Diode.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD1033
REV NO: V.5
DATE: JUN/30/2005
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203001497
Selection Guide
Part No.
Dice
APJA2107CGCK
Iv (mcd)
@ 20mA
Lens Type
GREEN (InGaAIP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
18
60
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD
Dominant Wavelength
∆λ1/2
Typ.
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1033
REV NO: V.5
DATE: JUN/30/2005
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203001497
Green
APJA2107CGCK
SPEC NO: DSAD1033
REV NO: V.5
DATE: JUN/30/2005
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203001497
APJA2107CGCK
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1033
REV NO: V.5
DATE: JUN/30/2005
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203001497
PACKING & LABEL SPECIFICATIONS
APJA2107CGCK
SPEC NO: DSAD1033
REV NO: V.5
DATE: JUN/30/2005
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP: 1203001497
Similar pages