Vishay CRCW12060000JKEA Lead (pb)-free thick film, rectangular chip resistor Datasheet

D../CRCW.... e3
Vishay
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
FEATURES
• High volume product suitable for commercial and
special applications
• Excellent stability (ΔR/R ≤ 1 % for 1000 h at 70 °C)
• Compliant with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Metal glaze on high quality ceramic
• Protective overglaze
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
MODEL
CRCW0201
INCH METRIC
0201
0525
POWER RATING
P70 °C
W
LIMITING
ELEMENT
VOLTAGE
MAX V≅
0.05
30
RESISTANCE
TEMPERATURE
TOLERANCE
RANGE
E-SERIES
COEFFICIENT
%
Ω
ppm/K
± 100
± 200
±1
± 1; ± 5
47R - 1M0
10R - 1M0
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 2M2
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
±1
±5
1R0 - 10M
24 + 96
24
Zero-Ohm-Resistor: Rmax = 50 mΩ, Imax at 70 °C = 1.0 A
D10/CRCW0402
0402
1005
0.063
50
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 1.5 A
D11/CRCW0603
0603
1608
0.10
75
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 2.0 A
D12/CRCW0805
0805
2012
0.125
150
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 2.5 A
D25/CRCW1206
1206
3216
0.25
200
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 3.5 A
CRCW1210
1210
3225
0.33
200
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 4.0 A
CRCW1218
1218
3246
1.0
200
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 7.0 A
CRCW2010
2010
5025
0.50
400
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 5.0 A
CRCW2512
2512
6332
1.0
500
± 100
± 200
Zero-Ohm-Resistor: Rmax = 20 mΩ, Imax at 70 °C = 7.0 A
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
• Marking and packaging: see appropriate catalog or web pages
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
Document Number: 20035
Revision: 04-Jul-07
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
www.vishay.com
107
D../CRCW.... e3
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
Vishay
TECHNICAL SPECIFICATIONS
D10/
UNIT CRCW0201 CRCW0402
PARAMETER
D11/
D12/
D25/
CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512
Rated Dissipation at 70 °C3)
W
0.05
0.063
0.10
0.125
0.25
0.33
1.0
0.5
1.0
Limiting Element Voltage2)
V≅
30
50
75
150
200
200
200
400
500
Insulation Voltage (1 min)
Vpeak
50
> 75
> 100
> 200
> 300
> 300
> 300
> 300
> 300
Thermal Resistance1)
K/W
≤ 870
≤ 550
≤ 440
≤ 220
≤ 140
≤ 65
≤ 88
≤ 65
Insulation Resistance
Ω
> 109
Category Temperature Range
°C
- 55/+ 125 (+ 155)
Failure Rate
h-1
1.10-9
g
0.17
29.5
25.5
40.5
Weight/1000 pcs
0.3 • 10-9
0.65
2
5.5
10
16
Notes
1. For sizes 0402 until 1206 the measuring conditions are in acc. to EN 140401-802. For all other sizes the result depends on the solder pad dimensions.
2. Rated voltage:
PxR
3. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRCW0603562RFKEC1)
C
MODEL
CRCW0201
CRCW0402
CRCW0603
CRCW0805
CRCW1206
CRCW1210
CRCW1218
CRCW2010
CRCW2512
R
C
W
0
VALUE
R = Decimal
K = Thousand
M = Million
0000 = Jumper
6
0
3
5
6
TOLERANCE
F = ± 1.0 %
J = ± 5.0 %
Z = Jumper
PRODUCT DESCRIPTION: D11/CRCW0603 100 562R 1 %
ET6
2
R
TCR
K = ± 100 ppm/K
N = ± 200 ppm/K
0 = Jumper
S = Special
F
K
E
C
PACKAGING2)
EA, EB,
EC, ED,
EE, EF,
EG, EH,
EI, EK,
EL, EY
SPECIAL
up to 2 digits
e3
D11/CRCW0603
100
562R
1%
ET6
e3
MODEL
CRCW0201
D10/CRCW0402
D11/CRCW0603
D12/CRCW0805
D25/CRCW1206
CRCW1210
CRCW1218
CRCW2010
CRCW2512
TCR
± 200 ppm/K
± 100 ppm/K
RESISTANCE VALUE
10R = 10 Ω
562R = 562 Ω
10K = 10.0 k Ω
1M = 1 MΩ
0R0 = Jumper
TOLERANCE
±5%
±1%
PACKAGING2)
ET1, ET5
ET6, ET7
EF4, E02
E67, E82
EG1, ET9
E20, E27
LEAD (Pb)-FREE
e3 = Pure Tin
Termination Finish
Notes
1. Preferred way for ordering products is by use of the PART NUMBER
2. Please refer to table PACKAGING, see next page
www.vishay.com
108
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
Document Number: 20035
Revision: 04-Jul-07
D../CRCW.... e3
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
Vishay
PACKAGING
REEL
MODEL
DIAMETER
PITCH
PIECES/
REEL
180 mm/7"
330 mm/13"
180 mm/7"
330 mm/13"
180 mm/7"
2 mm
2 mm
2 mm
2 mm
4 mm
10 000
50 000
10 000
50 000
5000
285 mm/11.25" 4 mm
10 000
EB
20 000
EC
EL
EI
TAPE
WIDTH
CRCW0201
8 mm
D10/CRCW0402 8 mm
D11/CRCW0603 8 mm
D12/CRCW0805 8 mm
D25/CRCW1206 8 mm
CRCW1210
BULK
PACKAGING CODE
PACKAGING CODE
PART NUMBER
PRODUCT DESC. PIECES
PART PRODUCT
NUMBER
DESC.
PAPER BLISTER PAPER BLISTER
ED
ET7
EE
EF4
ED
ET7
50 000
EY
E27
EE
EF4
EA
EI
ET1
EG1
330 mm/13"
4 mm
180 mm/7"
4 mm
285 mm/11.25" 4 mm
330 mm/13"
4 mm
180 mm/7"
4 mm
285 mm/11.25" 4 mm
ET5
5000
EA
10 000
EB
20 000
EC
EL
EI
5000
EA
10 000
EB
ET6
E20
ET1
EG1
ET5
ET6
E20
ET1
EG1
4 mm
20 000
EC
180 mm/7"
4 mm
5000
EA
ET1
ET5
10 000
EB
330 mm/13"
4 mm
20 000
EC
EY
E27
10 000
EY
E27
ET5
330 mm/13"
12 mm 285 mm/11.25" 4 mm
25 000
EL
ET6
E20
ET6
CRCW1218
12 mm
180 mm/7"
4 mm
4000
EK
ET9
CRCW2010
12 mm
180 mm/7"
4 mm
4000
EF
E02
CRCW2512
12 mm
180 mm/7"
8 mm
2000
EG
E67
4 mm
4000
EH
E82
DIMENSIONS
SOLDER PAD DIMENSIONS [in millimeters]
SIZE
DIMENSIONS [in millimeters]
REFLOW SOLDERING
INCH METRIC
L
W
H
T1
T2
+ 0.05
- 0.10
a
b
l
0.28
0.43
0.23
0201
0525
0.6 ± 0.05
0.3 ± 0.05
0.23 ± 0.05 0.15 ± 0.05
0.15
0402
1005
1.0 ± 0.05
0.5 ± 0.05
0.35 ± 0.05 0.25 ± 0.05
0.2 ± 0.1
0.4
0.6
0.5
0603
1608
1.55
+ 0.10
- 0.05
0.85 ± 0.1
0.45 ± 0.05
2.0
+ 0.20
- 0.10
1.25 ± 0.15
0.45 ± 0.05
3.2
+ 0.10
- 0.20
1.6 ± 0.15
0805
2012
0.3 ± 0.2
WAVE SOLDERING
a
b
l
0.3 ± 0.2
0.5
0.9
1.0
0.9
0.9
1.0
+ 0.20
- 0.10
0.3 ± 0.2
0.7
1.3
1.2
0.9
1.3
1.3
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
0.9
1.7
2.0
1.1
1.7
2.3
2.5 ± 0.2
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
0.9
2.5
2.0
1.1
2.5
2.2
+ 0.10
- 0.20
4.6 ± 0.15
0.55 ± 0.05
0.45 ± 0.2
0.4 ± 0.2
1.05
4.9
1.9
1.25
4.8
1.9
0.3
1206
3216
1210
3225
1218
3246
2010
5025
5.0 ± 0.15
2.5 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
2.5
3.9
1.2
2.5
3.9
2512
6332
6.3 ± 0.2
3.15 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
3.2
5.2
1.2
3.2
5.2
3.2 ± 0.2
3.2
Document Number: 20035
Revision: 04-Jul-07
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
www.vishay.com
109
D../CRCW.... e3
Vishay
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
FUNCTIONAL PERFORMANCE
Pulse Load Pmax (W)
Single Pulse
1000
2512
1218
2010
1206
0805
0603
0402
100
10
1
0.1
0.01-6
10
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse load, single pulse; applicable if P 0 and n ≤ 1000 and U ≤ Umax;
for permissible resistance change equivalent to 8000 h operation
Continuous Pulse Load Pmax (W)
Continuous Pulse
100
1218
2010
1206
0805
0603
0402
10
1
0.10
0.01 -6
10
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb) and Û ≤ Ûmax;
for permissible resistance change equivalent to 8000 h operation
Pulse Voltage Ûmax (V)
Pulse Voltage
2000
2512
1800
1600
2010
1400
1200
1000
800
1206/1210/1218
600
400
0805
0603
200
0 -6
10
0402
10-5
10-4
10-3
10-2
10-1
1
10
Pulse Duration ti (s)
Maximum pulse voltage, single and continuous pulses; applicable if
P ≤ Pmax; for permissible resistance change equivalent to 8000 h operation
www.vishay.com
110
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
Document Number: 20035
Revision: 04-Jul-07
D../CRCW.... e3
90
80
0402 0603 0805
1206
1210
70
60
50
Rated Power in %
Temperature Rise in °C
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
2010
Vishay
120
100
80
60
40
2512
30
40
1218
20
20
10
0
0
0.1
0.2
0.3
0.4
0
- 55
0.5
- 25
0
25
50
Power in W
Derating
110
100
90
80
1206
0805
0603
0402
70
60
Current Noise in µV/V
Non-Linearity A3 in dB
Temperature Rise
75
100
125
150 175
70 Ambient Temperature in °C
100
2
040
10
3
060
5
080
6
120
50
1
40
30
20
10
0.1
100
1K
Non-Linearity
Document Number: 20035
Revision: 04-Jul-07
10K
100K
1M
10M
Resistance Value in Ω
100
1K
10K
100K
1M
10M
Resistance Value in Ω
Current Noise
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
www.vishay.com
111
D../CRCW.... e3
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
140
140
120
120
Temperature rise in ϑü °C
Vishay
100
02
04
05
08
6
03
06
120
80
60
40
100
ϑü
40
80
C
°C
60
°C
80
60
°C
0°
C
10
40
0°
20
20
C
C
0°
14
0
20
0
0.4
0.3
0.2
0.1
0
40
60
80
100
120
140
160
180
Film temperature ϑs in ° C
Load in W
0.01
0
10
0
00
0.1
h
h
0
00 0 h
10 500 00 h
20
00
10
0.01
Resistance change
[ΔR/R] in % after 1000 h
ΔR/R (t) = f [ΔR/R (t = 1000 h)]
Parameter: time
t=
=2
12
ϑü = f [P]]
Parameter: size
0.5
0°
ϑü = f [ϑs]
Parameter: ϑu
≤1
0K
≤1
M
0.1
≤1
0M
ΔR/R [t = 1000 h] = f [ϑs]
Parameter: resistance value
h
1
10
1
Resistance change ΔR/R %
0.1
1
20
0.01
40
60
80
120
ϑü =[°C]
Stability nomogram typical values
(for handling see general explanations)
100
120 140 160 180
Film temperature ϑs in ° C
100
C
0°
ϑu
=2
80
C
0°
ϑ
u
=4
60
0.25 W
C
0°
ϑu
=6
40
C
0°
0.125 W
ϑu
=8
20
0.0625 W
00
ϑu
1
2 3
5 7 10
2 3
number of mounted resistors [pcs]
5 7
100
2
3
5
7
60
80
=1
°C
20
ϑu
=1
°C
100
120
140
surface temperature ϑs [°C]
Power rating as a function of packaging density (guideline)
www.vishay.com
112
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
Document Number: 20035
Revision: 04-Jul-07
D../CRCW.... e3
Lead (Pb)-free Thick Film, Rectangular Chip Resistors
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR/R)
TEST (clause)
CONDITIONS OF TEST
STABILITY CLASS 1 STABILITY CLASS 2
OR BETTER
OR BETTER
SIZE 0201 ONLY
REQUIREMENTS
PERMISSIBLE
CHANGE (ΔR/R)
stability for product types:
D../CRCW....e3
1 Ω to 10 MΩ
1 Ω to 10 MΩ
10 Ω to 1 MΩ
±1%
±5%
± 1 %; ± 5 %
± 100 ppm/K
± 200 ppm/K
± 200 ppm/K
± (0.25 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
± (1 % R + 0.05 Ω)
Resistance (4.5)
-
Temperature coefficient
(4.8.4.2)
20/- 55/20 °C and
20/125/20 °C
Overload (4.13)
U = 2.5 × (P70 × R)1/2
≤ 2 × Umax;
Duration: according the style
Solderability (4.17.5)
Aging 4 h at 155 °C, dryheat
Solder bath method; 235 °C; 2 s
Visual examination
Resistance to soldering
heat (4.18.2)
Solder bath method;
(260 ± 5) °C; (10 ± 1) s
± (0.25 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
± (1 % R + 0.05 Ω)
Rapid change of
temperature (4.19)
30 min. at LCT = - 55 °C;
30 min. at UCT = 125 °C; 5 cycles
± (0.25 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
± (0.5 % R + 0.05 Ω)
Damp heat, steady state
(4.24)
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
± (1 % R + 0.05 Ω)
± (2 % R + 0.1 Ω)
± (2 % R + 0.1 Ω)
Climatic sequence (4.23)
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
U = (P70 × R)1/2
U = Umax; whichever is less severe
± (1 % R + 0.05 Ω)
± (2 % R + 0.1 Ω)
± (2 % R + 0.1 Ω)
Endurance at 70 °C
(4.25.1)
U = (P70 × R)1/2
U = Umax; whichever is less severe
1.5 h on; 0.5 h off;
70 °C; 1000 h
± (1 % R + 0.05 Ω)
± (2 % R + 0.1 Ω)
± (3 % R + 0.1 Ω)
Extended endurance
(4.25.1.8)
Duration extended to 8000 hours
± (2 % R + 0.1 Ω)
± (4 % R + 0.1 Ω)
± (4 % R + 0.1 Ω)
Endurance at upper
category temperature
(4.25.3)
UCT = 125 °C; 1000 h
± (1 % R + 0.05 Ω)
± (2 % R + 0.1 Ω)
± (2 % R + 0.1 Ω)
Good tinning (≥ 95 % covered)
no visible damage
APPLICABLE SPECIFICATIONS
• EN 60115-1
Generic Specification
• EN 140400
Sectional Specification
• EN 140401-802
Detail Specification
• IEC 60068-2-X
Variety of environmental test procedures
• IEC 60286-3
Packaging of SMD components
Document Number: 20035
Revision: 04-Jul-07
For technical questions in Europe, contact: [email protected]
For technical questions in Americas/Asia, contact: [email protected]
www.vishay.com
113
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Similar pages