Hittite HMC332 Gaas mmic mixer w/ integrated lo amplifier, 2.0 - 2.8 ghz Datasheet

HMC332 / 332E
v01.0705
MIXERS - SMT
7
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Typical Applications
Features
The HMC332 / HMC332E is ideal for:
Integrated LO Amplifier w/ Pdiss: < 20 mW
• MMDS
Conversion Loss / Noise Figure: 8.0 dB
• PCMCIA
Low LO Drive Level: 0 dBm
• WirelessLAN
Input IP3: +10 dBm
• WCDMA micro-BTS
Single Positive Supply: 3V to 5V
Functional Diagram
General Description
The HMC332 & HMC332E are single balanced mixer
ICs with integrated LO amplifiers. This converter IC
can operate as an upconverter or downconverter
between 2.0 GHz and 2.8 GHz. With the integrated LO
amplifier, the mixer requires an LO drive level of only
0 dBm, and requires only 6 mA from a single positive
+3V rail. The mixer has 8 dB of conversion loss, an
input P1dB of 0 dBm, and an input third order intercept
point of +10 dBm.
Electrical Specifications, TA = +25° C
IF = 100 MHz
LO = 0 dBm & Vdd = +3V
Parameter
Min.
Typ.
Units
Max.
Frequency Range, RF & LO
2.0 - 2.8
GHz
Frequency Range, IF
DC - 1.0
GHz
Conversion Loss
8
10
Noise Figure (SSB)
8
10
dB
LO to RF Isolation
11
20
dB
LO to IF Isolation
2
5
dB
RF to IF Isolation
11
17
dB
IP3 (Input)
4
10
dBm
1 dB Compression (Input)
-4
0
dBm
6
mA
Supply Current (Idd)
* Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
7 - 196
dB
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Conversion Gain vs.
Temperature @ LO = 0 dBm
Isolation @ LO = 0 dBm
0
0
-10
+25 C
-40 C
+85 C
-15
-20
1.4
1.6
1.8
2
2.2
2.4
2.6
7
-10
-15
-20
RF/IF
LO/RF
LO/IF
-25
2.8
3
3.2
-30
1.4
3.4
1.6
1.8
2
FREQUENCY (GHz)
Conversion Gain vs. LO Drive
2.6
2.8
3
3.2
3.4
0
-6 dBm
-4 dBm
-2 dBm
-5
0 dBm
+2 dBm
+4 dBm
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
2.4
Return Loss @ LO = 0 dBm
0
-10
-15
-10
-15
RF
LO
-20
-25
-20
1.4
-30
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
0
0.5
FREQUENCY (GHz)
-5
-5
RESPONSE (dB)
0
-10
-20
1.4
1.5
2
2.5
3
3.5
4
IF Bandwidth @ LO = 0 dBm
0
+2.7V
+3.0V
+3.3V
-15
1
FREQUENCY (GHz)
Conversion Gain vs. Vdd @ LO = 0 dBm
CONVERSION GAIN (dB)
2.2
FREQUENCY (GHz)
MIXERS - SMT
ISOLATION (dB)
CONVERSION GAIN (dB)
-5
-5
-10
CONVERSION GAIN
RETURN LOSS
-15
-20
1.6
1.8
2
2.2
2.4
2.6
2.8
FREQUENCY (GHz)
3
3.2
3.4
0
0.3
0.5
0.8
1
1.3
1.5
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 197
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Upconverter Performance
Conversion Gain @ LO = 0 dBm
Input P1dB vs.
Temperature @ LO = 0 dBm
0
10
6
INPUT P1dB (dBm)
-5
-10
-15
4
2
0
-2
-4
+25 C
-40 C
+85 C
-6
-8
-20
1.7
1.9
2.1
2.3
2.5
2.7
2.9
3.1
-10
1.9
3.3
2
2.1
2.2
FREQUENCY (GHz)
15
15
INPUT IP3 (dBm)
20
10
0
1.9
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.5
2.7
2.8
2.9
2.8
2.9
10
+25 C
-40 C
+85 C
5
-2 dBm
0 dBm
+2 dBm
2
2.4
Input IP3 vs.
Temperature @ LO = 0 dBm*
20
5
2.3
FREQUENCY (GHz)
Input IP3 vs. LO Drive*
INPUT IP3 (dBm)
MIXERS - SMT
7
CONVERSION GAIN (dB)
8
2.6
2.7
2.8
0
1.9
2.9
2
2.1
2.2
FREQUENCY (GHz)
2.3
2.4
2.5
2.6
FREQUENCY (GHz)
Input IP3 vs. Vdd @ LO = 0 dBm*
Input P1dB vs. Vdd @ LO = 0 dBm
20
10
8
6
INPUT P1dB (dBm)
INPUT IP3 (dBm)
15
10
+2.7V
+3.0V
+3.3V
5
4
2
0
-2
-4
+2.7V
+3.0V
+3.3V
-6
-8
0
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
FREQUENCY (GHz)
-10
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
FREQUENCY (GHz)
* Two-tone input power= -10 dBm each tone, 1 MHz spacing.
7 - 198
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Harmonics of LO
MxN Spurious @ IF Port
nLO Spur @ RF Port
0
1
2
3
4
LO Freq. (GHz)
1
2
3
4
0
xx
-11
8
8
43
2
24
6
19
32
1
12
0
31
34
48
2.2
20
7
18
44
2
41
35
39
32
45
2.4
20
9
22
43
3
>74
64
>74
50
67
2.6
19
13
18
40
4
>74
>74
>74
71
67
2.8
14
18
21
38
3
11
15
24
39
RF = 2.5 GHz @ -10 dBm
LO = 2.4 GHz @ 0 dBm
All values in dBc below IF power level.
LO = 0 dBm
All values in dBc below input LO level @ RF port.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7
MIXERS - SMT
nLO
mRF
7 - 199
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Absolute Maximum Ratings
MIXERS - SMT
7
RF / IF Input (Vdd = +3V)
+13 dBm
LO Drive (Vdd = +3V)
+13 dBm
Vdd
5.5V
Continuous Pdiss (Ta = 85 °C)
(derate 2.64 mW/°C above 85 °C)
238 mW
IF DC Current
±3 mA
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC332
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC332E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H332
XXXX
[2]
332E
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
7 - 200
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Pin Descriptions
Function
Description
1
Vdd
Power supply for the LO Amplifier. Two external RF bypass
capacitors (10 pF & 10,000 pF) and an external inductor
4.7 nH) are required.
2, 5
GND
Ground: Pin must connect to RF ground.
3
IF
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value have been chosen to pass the necessary
IF frequency range. For operation to DC, this pin must not source/
sink more than 3mA of current or die non-function and possible
die failure will result.
4
RF
This pin is AC coupled and matched to
50 Ohm from 2.0 - 2.8 GHz.
6
LO
This pin is AC coupled and matched to
50 Ohm from 2.0 - 2.8 GHz.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7
MIXERS - SMT
Pin Number
7 - 201
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Application Circuit
MIXERS - SMT
7
7 - 202
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC332 / 332E
v01.0705
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 2.0 - 2.8 GHz
Evaluation PCB
MIXERS - SMT
7
List of Materials for Evaluation PCB 105099 [1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
C1
10 pF Capacitor, 0603 Pkg.
C2
.01 μF Capacitor, 0603 Pkg.
L1
4.7 nH Inductor, 0805 Pkg.
U1
HMC332 / HMC332E Mixer
PCB [2]
103927 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
VIA holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 203
Similar pages