OPLINK MWDMGCR00001113 C band red/blue pass micro-optic wdm Datasheet

Green C Band Red/Blue Pass Micro-Optic WDM
MWDMGCR/CB Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device.
This device offers flat and wide passband, low insertion loss, and high isolation,
which make this device ideal for high-power Optical Amplification Systems and
DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221
qualification tested and complied with industry green initiatives such as Rohs
and WEEE. All Oplink products are epoxy-free in the optical path.
Performance Specificationns
MWDMGCR/CB Series
Min
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength
Range λ2
Typical
Max
Unit
Type CR
1547.4
1561.0
nm
Type CB
1530.0
1543.2
nm
Type CR
1530.0
1543.2
nm
Type CB
1547.4
1561.0
nm
0.8
0.5
dB
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
12
20
dB
Passband Ripple
0.30
dB
Directivity
50
dB
Return Loss
50
dB
Features
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
Polarization Dependent Loss
0.1
dB
Applications
Polarization Mode Dispersion
0.05
ps
 Fiberoptic Amplifiers
Maximum Power Handling
500
mW
Fiber Type
Corning SMF-28
Operating Temperature
Storage Temperature
Package Dimensions **
250 μm Bare Fiber
900 μm Loose Tube
0 to +70
°C
-40 to +85
°C
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
mm
 System Monitoring
 Fiberoptic Instruments
 Laboratory R&D
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom
specified.
*** The maximum IL is under all states of polarization and within the full operating temperature and
wavelength ranges specified.
R03.20081118
Green C Band Red/Blue Pass Micro-Optic WDM
MWDMGCR/CB Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: SMF-28 250 µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900 µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
MWDMG
C
0
0
0
0
Band
Wavelength
Fiber Length*
C band = C
Red pass = R
Blue pass = B
0.5 meter = H
1.0 meter = 1
1.5 meters = 5
2.0 meters = 2
Package & Fiber Jacket
P1 + 250 μm bare fiber = 11
P2 + 900 μm loose tube = 22
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard.
The lead-time for special fiber length will be longer.
R03.20081118
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages