GT BGA Socket - Direct mount, solderless 80.00 A Digi-Key WM2012-ND 2 pin connector A Features • Wide temperature range (-55C to +160°C). • Current rating at 20C temperature rise is 5.4 Amps per pin • Excellent signal integrity at high frequencies. • Low and stable contact resistance for reliable production yield. • Highly compliant to accommodate wide co-planarity variations. 82.814 SECTION A-A Recommended torque : 848 - 1650 N-cm [75 - 146 lbf-in] 35.90 50.90 76.18 43.18 2.00 customer's PCB 25.00 7.94 6.350 74.50 socket size 40.00 74.50 socket size Description: Socket for 43x59mm 41x57 1mm pitch BGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 1 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1:1.6 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 GT BGA Socket - Direct mount, solderless Features Socket without heatsink and fan • Wide temperature range (-55C to +160°C). • Current rating at 20C temperature rise is 5.4 Amps per pin • Excellent signal integrity at high frequencies. • Low and stable contact resistance for reliable production yield. • Highly compliant to accommodate wide co-planarity variations. 58.500 Recommended torque : 848 - 1650 N-cm [75 - 146 lbf-in] 81.500 lid opens 7.00 15.28 max components height 25.18 29.250 center of socket 37.250 center of socket Description: Socket for 43x59mm 41x57 1mm pitch BGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 2 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1:1.25 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 GT BGA Socket - Direct mount, solderless Features • Wide temperature range (-55C to +160°C). • Current rating at 20C temperature rise is 5.4 Amps per pin • Excellent signal integrity at high frequencies. • Low and stable contact resistance for reliable production yield. • Highly compliant to accommodate wide co-planarity variations. 58.500 74.500 Recommended torque : 848 - 1650 N-cm [75 - 146 lbf-in] 58.50 6.12 31.40 15.28 max components height 29.250 center of socket 37.250 center of socket Description: Socket for 43x59mm 41x57 1mm pitch BGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.0254mm [±0.001"], Pitches (from true position) ±0.0762mm [±0.003"], substrate thickness tolerance ±10%, all other tolerances ±0.127mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 3 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1:1.25 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 58.500±0.125 socket and backing plate outline 5.00 8X A 3.60±0.10 THRU ALL 0.035 A B 5.00 26.00 74.500±0.125 socket and backing plate outline 33.00 B 56.00 26.00 0.51 pad 2X 1.70±0.10 THRU ALL 0.025 A B 40.00 25.00 25.00 Description: Recommended PCB Layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 4 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1.5:1 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 43.00±0.05 Ironwood Package Code BGA2028A 42.00 LID 40.00 38.00 A1 corner 1.00 typ. 58.00 LID 59.00±0.05 54.00 56.00 A 1.00 typ. A 1.790 L 1.00 2.108 4.008 0.60 S SECTION A-A Dimensions are in millimeters. 1. 2. 3. 4. Interpret dimensions and tolerances per ASME Y14.5M-1994. Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z. Datum Z (seating plane) is defined by the spherical crowns of the solder balls. Parallelism measurement shall exclude any effect of mark on top surface of package. Description: Compatible Device Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 5 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1.5:1 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 58.50±0.125 32.00 12.00 R0.80 5.45 74.50±0.125 17.30 1.30 1.30 13.40 3.50 33.00±0.04 (x4) 10.00 33.00 6.80 8.00 8X 3.60 THRU ALL 25.00±0.035 (x4) 20.00 1.588 insulating plate 6.350 backing plate Description: Socket, Backing Plate Detail Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 6 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1.25:1 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 Ball Guide (top view) Interposer (top view) 58.500 74.500 24.50 24.50 8.50 8.50 Description: Interposer and Ball Guide Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 7 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1.25:1 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 17 ITEM NO. DESCRIPTION Material 1 Socket Base 7075-T6 Aluminum Alloy 2 Socket lid 7075-T6 Aluminum Alloy 3 Compression Plate 7075-T6 Alumium Alloy 4 Compression Screw, M40 7075-T6 Aluminum Alloy 5 Heatsink compression Screw 7075-T6 Alumium Alloy 6 Backing plate 7075-T6 Aluminum Alloy 7 Insulating plate FR4 Standard 8 Ball Guide Kapton Polyimide/Cirlex 9 Customer's target PCB FR4 Standard 10 Customer's device FR4 Standard 11 Fan 80x25, 40.2CFM 12V Plastic (UL 94V-0) 12 Torquing bracket Stainless Steel (303) 13 GT Elastomer 43x59mm IC 1mm pitch 41x57 array Conductive Elastomer 14 Screw, M3 x 0.5mm, 20mm lg, Low Head Cap, SS Stainless Steel (18-8) 15 Dowel Pin, 1/16" x 3/16", SS Chrome Stainless Steel 16 Low Profile Shoulder Screw, M3 THRD, 4mm shoulder dia., 188SS Stainless Steel (18-8) 7 17 Socket Head Cap Screw, M4x0.7 , 40mm lg Alloy Steel 6 18 3 pin connectot housing 0.1 with ramp Nylon 101 19 Crimp Terminal 22-30 GA Wire Brass 20 Heatsink compression Screw 7075-T6 Alumium Alloy 12 18 11 5 20 4 2 3 10 14 16 1 8 13 9 Description: Socket assembly Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: N/A Finish: N/A Weight: 1088.96 STATUS: Released SHEET: 8 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1:2.4 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015 To apply the torque specified on page 1 you would need additional tools (not included with the socket, but could be purchased separately) ACDelco ARM601-3 3/8-Inch Digital Torque Wrench 24 - 444 in lb torque range Item Weight 2.8 pounds Product Dimensions 1.5 x 1.5 x 12.2 inches Batteries: 4 AAA batteries required. (included) Ironwood Part number R3902 Square Drive Hex Insert Bit Holder Magnetic Plain End, 3/8" Female Square Drive, 1/4" Hex Length 2 1/8" Magnetic Plain End Use with male square-drive tools. Made of steel. Ironwood Part number R3903 Bit Adapter 1/4" x 1/4" Hex Shank Socket Head Insert Bit, 2" long Ironwood Part number R3916 Description: Accessories Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. GT-BGA-2023 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Finish: Weight: STATUS: Released SHEET: 9 OF 9 REV. A ENG: E. Smolentseva DRAWN BY: M. Raske SCALE: 1:2.4 FILE: GT-BGA-2023 Dwg DATE: 05/08/2015