HP HLMP-DB45-D0000 T-1 3/4 (5 mm), t-1 (3 mm) blue led lamp Datasheet

T-13/4 (5 mm), T-1 (3 mm)
Blue LED Lamps
Technical Data
HLMP-DB25-B00xx
HLMP-KB45-A00xx
Features
Description
• Popular T-13/4 and T-1
Diameter Packages
• General Purpose Leads
• Reliable and Rugged
• Available on Tape and Reel
• Binned for Color and
Intensity
These blue LEDs are designed in
industry standard T-1 and T-13/4
package with clear and non
diffused optics. They are also
available in tape and reel, and
ammo-pack option for ease of
handling and use.
Applications
• Status Indicators
• Small Message Panel
• Running and Decorative
Lights for Commercial Use
These blue lamps are ideal for
use as indicators and for general
purpose lighting. Blue lamps
offer color differentiation as blue
is attractive and not widely
available.
Package Dimensions
5.08 (0.200)
4.57 (0.180)
3.18 (0.125)
2.67 (0.105)
3.43 (0.135)
2.92 (0.115)
9.19 (0.352)
8.43 (0.332)
4.70 (0.185)
4.19 (0.165)
6.35 (0.250)
5.58 (0.220)
1.02 (0.040)
NOM.
0.89 (0.035)
0.64 (0.025)
23.0
MIN.
(0.90)
23.0
(0.90) MIN.
0.45 (0.018)
SQUARE NOMINAL
0.45 (0.018)
SQUARE NOM.
CATHODE
2.54 (0.100) NOM.
1.27 (0.050)
NOM.
1.27 (0.050)
NOM.
6.10 (0.240)
5.59 (0.220)
CATHODE
2.54 (0.100)
NOM.
HLMP-KB45
HLMP-DB25
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
CAUTION: Devices are Class II ESD sensitive. Please observe appropriate precautions during handling
and processing. Refer to Application Note AN-1142 for additional details.
2
Selection Guide
Luminous Intensity Iv (mcd)
Part Number
HLMP-KB45-A00xx
HLMP-DB25-B00xx
Package
T-1
T-1 3/4
Viewing Angle
40
25
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
02: Tape & Reel, Straight Leads
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle
25: 25 degrees
45: 40 degrees
Color Options
B: Blue 462 nm
Package Options
D: T-1 3/4 (5 mm)
K: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25˚C
Parameter
Blue
Units
Peak Forward Current
70
mA
DC Current[1]
30
mA
Reverse Voltage (IR = 100 µA)
5
V
Transient Forward Current[2]
(10 µsec Pulse)
350
mA
LED Junction Temperature
115
˚C
Operating Temperature
–20 to +80
˚C
Storage Temperature
–30 to +100
˚C
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
260°C for 5 seconds
Notes:
1. Derate linearly from 50 °C as shown in Figure 6.
2. The transient peak current is the maximum non-recurring peak current that can be
applied to the device without damaging the LED die and wirebond. It is not
recommended that this device be operated at peak currents above the Absolute
Maximum Peak Forward Current.
Min.
30
40
Max.
–
–
3
Optical Characteristics at TA = 25˚C
HLMP-DB25-B00xx
Luminous
Intensity
IV (mcd)
@ IF = 20 mA
Min.
Typ.
40
100
HLMP-KB45-A00xx
30
Part Number
Color,
Dominant
Wavelength
λd[1] (nm)
Typ.
Peak
Wavelength
λPEAK (nm)
Typ.
Viewing
Angle
2θ1/2 [2]
Degrees
Typ.
462
426
25
462
426
40
45
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2. θ 1/2 is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
Electrical Characteristics at TA = 25˚C
Part
Number
Forward
Reverse
Voltage
Breakdown
VF (Volts)
VR (Volts)
@ IF = 20 mA @ IR = 100 µA
Typ. Max.
Min.
Typ.
Speed
Response
τs (ns)
Typ.
Thermal
Resistance
Capacitance RθJ-PIN (°C/W)
C (pF), VF = 0, Junction to
f = 1 MHz
Cathode Lead
Typ.
Typ.
HLMP-DB25-B00xx
4.0
5.0
5.0
30
500
97
260
HLMP-KB45-A00xx
4.0
5.0
5.0
30
500
97
290
0.5
0
350 400 450 500 550 600 650 700
WAVELENGTH – nm
Figure 1. Relative Intensity vs.
Wavelength.
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
IF – FORWARD CURRENT – mA
RELATIVE INTENSITY
1.6
60
1.0
50
40
30
20
10
0
0
1
2
3
4
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs.
Forward Voltage.
5
1.4
1.2
1.0
20
30
40
50
60
70
80
IP – PEAK FORWARD CURRENT – mA
Figure 3. Relative Intensity vs. Peak
Forward Current (300 µs pulse
width, 10 ms period).
Hz
Hz
FR
RE
HR
ES
AT
E
PULSE WIDTH (SECONDS)
10°
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
IF – DC FORWARD CURRENT – mA
Figure 4. Forward Current vs.
Forward Voltage.
20°
35
1.2
1.1
1.0
0.9
0.8
IF – FORWARD CURRENT – mA DC
300
Hz
Hz
100
1K
z
KH
3K
1
1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
10
10
RATIO OF PEAK CURRENT TO
TEMPERATURE DERATED DC CURRENT
4
Figure 5. Relative Luminous Intensity
vs. Forward Current.
30
25
20
15
10
5
0
0
10 20 30 40 50 60 70 80 90
TA – AMBIENT TEMPERATURE – °C
Figure 6. Maximum DC Forward
Current vs. Ambient Temperature.
Derating Based on TJ Max. = 115 °C.
0°
1.0
30°
.8
40°
50°
.6
60°
.4
70°
.2
80°
90°
10° 20° 30° 40° 50° 60° 70° 80° 90°100°
Figure 7. Relative Luminous Intensity vs. Angular Displacement
for HLMP-DB25.
20°
10°
0°
1.0
30°
40°
.8
50°
.6
60°
70°
80°
90°
.4
.2
10° 20° 30° 40° 50° 60° 70° 80° 90°100°
Figure 8. Relative Luminous Intensity vs. Angular Displacement
for HLMP-KB45.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride,
trichloroethylene, carbon
tetrachloride, etc.) are not
recommended for cleaning LED
parts. All of these various
solvents attack or dissolve the
encapsulating epoxies used to
form the package of plastic LED
parts.
For information on soldering
LEDs, please refer to Application
Note 1027.
5
Intensity Bin Limits
Intensity Range (mcd)
Min.
Max.
30.0
40.0
40.0
50.0
50.0
65.0
65.0
85.0
85.0
110.0
110.0
140.0
140.0
180.0
180.0
240.0
240.0
310.0
310.0
400.0
400.0
520.0
520.0
680.0
680.0
880.0
Bin
A
B
C
D
E
F
G
H
J
K
L
M
N
Color Bin Limits
(nm at 20 mA)
Blue
Bin ID
1
nm @ 20 mA
Min.
Max.
460.0
464.0
2
464.0
468.0
3
468.0
472.0
4
472.0
476.0
5
476.0
480.0
Tolerance for each bin limit will be ± 0.5nm.
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Bulk Packaging, minimum increment 500 pcs/bag
02
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
DD
Ammo Pack, straight leads with minimum increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2003 Agilent Technologies, Inc.
Obsoletes 5988-2226EN
May 12, 2003
5988-9507EN
Similar pages