Marktech LO494PBL4-B0G-A3-MT 100 degree 4mm oval led lamp in blue color Datasheet

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP
Document No:
Model No :
Rev. No:
Date:
SPE/LO494PBL4-B0G-A3-MT
LO494PBL4-B0G-A3-MT
01
2006-08-08
Description:
100 Degree 4mm Oval LED Lamp in Blue
Color with Tinted Diffused Lens and
Stopper
*This specification is only for MT
Dice Material:
InGaN
Confirmed
by Customer:
Date:
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC
SENSITIVE DEVICES
Document No. SPE/LO494PBL4-B0G-A3-MT
Rev. No.
01
Applications:
-
Dimension Drawing
Full Color Display
Absolute Maximum Ratings at Ta = 25°C
Items
Absolute maximum
Symbol
Unit
Rating
Forward Current
IF
25
mA
Peak Forward Current*
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering
Temperature
Max.260°C for 3 sec Max.
Tsol
(3mm from the base of the epoxy bulb)
*pulse width <=0.1msec duty <=1/10
Typical Electrical & Optical Characteristics ( Ta = 25°C)
Items
Symbol
Condition
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF = 20mA
---
3.4
4.0
V
Reverse Current
IR
VR = 5V
---
---
100
µA
Dominant Wavelength
λD
IF = 20mA
465
470
475
nm
Luminous Intensity
IV
IF = 20mA
145
300
---
mcd
2θ½H-H
IF = 20mA
---
100
---
deg
2θ½V-V
IF = 20mA
---
50
---
deg
50% Power Angle
2/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LO494PBL4-B0G-A3-MT
Rev. No.
01
Standard bins for LO494PBL4-B0G-A3-MT (IF = 20mA):
Lamps are sorted to Luminous Intensity –IV, VF & Dominant Wavelength –λD bins shown.
Orders for LO494PBL4-B0G-A3-MT may be filled with any or all bins contained as below.
All Luminous Intensity –IV, VF & Dominant Wavelength –λD values shown and specified are at IF =20mA.
* M+
X4
X5
Luminous Intensity (IV)
550mcd
Q
390mcd
P
280mcd
N
200mcd
M
145mcd
465nm
470nm
475nm
Dominant Wavelength (λD)
* M+ indicates Luminous Intensity is at M bin or above.
Forward Voltage (VF)
Rank
V7
V8
V9
V10
V11
V12
Voltage
2.8-3.0V
3.0-3.2V
3.2-3.4V
3.4-3.6V
3.6-3.8V
3.8-4.0V
*Majority VF bins are highlighted in Yellow.
Important Notes:
1) All ranks will be included per delivery; rank ratio will be based on the Dices distribution.
2) Pb content <1000PPM.
3) Tolerance of measurement of luminous intensity is ±15%.
4) Tolerance of measurement of dominant wavelength is ±1nm.
5) Tolerance of measurement of Vf is ±0.05 V.
6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD.
7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions.
8) Please refer to APPLICATION NOTES for Application.
3/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LO494PBL4-B0G-A3-MT
Rev. No.
01
Graphs
1. Cathode PAD Area (0.18 x 0.18inch2)
2. Height above nominal seating plane in inches(0.3inch)
Items
Signatures
Date
Prepared by
LiuZM
2006-08-08
Checked by
Aldosin
2006-08-08
Approved by
David
2006-08-08
FCN#
Revision History
Rev. No
Date
Change Description
FCN20060265
Data is subject to change without prior notice.
Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4
Similar pages