MC4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS .. . .. . INTERNALLY COMPENSATED SHORT–CIRCUIT PROTECTION GAIN AND PHASE MATCH BETWEEN AMPLIFIERS LOW POWER CONSUMPTION PIN TO PIN COMPATIBLE WITH MC1458/LM358 GAIN BANDWIDTH PRODUCT (at 100kHz) 5.5MHz N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) P TSSOP8 (Thin Shrink Small Outline Package) ORDER CODES DESCRIPTION Part Number The MC4558 is a high performance monolithic dual operational amplifier. The circuit combines all the outstanding features of the MC1458 and, in addition, possesses three times the unity gain bandwidth of the industry standard. MC4558C MC4558I Pakcage Temperature Range N D P 0oC, +70oC • • • • • • o o -40 C, +105 C Example : MC4558CN PIN CONNECTIONS (top view) 1 2 - 3 + 4 August 1998 8 7 - 6 + 5 1 – Output 1 2 – Inverting input 1 3 – Non-inverting input 1 4 –V CC 5 – Non-inverting input 2 6 – Inverting input 2 7 – Output 2 8 – VCC+ 1/7 MC4558 SCHEMATIC DIAGRAM (1/2 MC4558) 3.1kΩ VCC Inverting input 150Ω Non-inverting input 25Ω Output 25Ω 10pF 87pF 7.1 kΩ 480Ω 7.1kΩ 4.2kΩ 36kΩ VCC ABSOLUTE MAXIMUM RATINGS Symbol VCC MC4558I MC4558C Unit Supply Voltage Parameter ±22 ±22 V V Vi Input Voltage ±15 ±15 Vid Differential Input Voltage ±30 ±30 V Ptot Power Dissipation 680 680 mW Output Short-circuit Duration Infinite T oper Operating Free-air Temperature Range –40 to +105 0 to +70 o Tstg Storage Temperature Range –65 to +150 –65 to +150 o 2/7 C C MC4558 ELECTRICAL CHARACTERISTICS VCC = ±15V, Tamb = 25oC (unless otherwise specified) Symbol Vio Iio Iib Avd SVR ICC Parameter Min. Typ. Max. Input Offset Voltage (RS ≤ 10 kΩ) Tamb = 25oC Tmin. ≤ Tamb ≤ Tmax. 1 5 6 Input Offset Current o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. 20 100 200 Input Bias Current Tamb = 25oC Tmin. ≤ Tamb ≤ Tmax. 50 400 500 mV nA nA Large Signal Voltage Gain (VO = ±10V, R L = 2kΩ) o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. 50 25 200 Supply Voltage Rejection Ratio (RS ≤ 10kΩ) o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. 77 77 90 V/mV dB Supply Current, all Amp, no Load o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. mA 2.3 Vicm Input Common Mode Voltage Range o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. ±12 ±12 CMR Common-mode Rejection Ratio (RS ≤ 10kΩ) o Tamb = 25 C Tmin. ≤ Tamb ≤ Tmax. 70 70 90 Ios Output Short-circuit Current 10 20 Vo Output Voltage Swing Tamb = 25oC 10kΩ 2kΩ 10kΩ 2kΩ ±12 ±10 ±12 ±10 ±14 ±13 Slew Rate (VI = ±10V, R L = 2kΩ, CL = 100pF, Tamb = 25oC, unity gain) 1.5 2.2 Tmin. ≤ Tamb ≤ Tmax. SR tr KOV GBP THD en VO1/VO2 = = = = 40 mA V V/µs 15 Input Capacitance B RL RL RL RL Overshoot o (VI = ±20 mV, RL = 2kΩ, CL = 100pF, Tamb = 25 C, unity gain) Input Resistance RO dB 0.3 Ci 4.5 6 V Rise Time o (VI = ±20mV, R L = 2kΩ, CL = 100pF, Tamb = 25 C, unity gain) Ri Unit µs % 0.3 2 MΩ 1.4 pF 75 Ω Unity Gain Bandwidth 2.8 MHz Gain Bandwidth Product (VI = 10mV, RL = 2kΩ, C L = 100pF, f = 100kHz, Tamb = 25oC) 5.5 Output Resistance Total Harmonic Distortion o (f = 1kHz, Av = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, Tamb = 25 C) MHz % 0.008 Equivalent Input Noise Voltage (f = 1kHz, Rs = 100Ω) 12 nV √ Hz Channel Separation 120 dB 3/7 MC4558 TRANSIENT RESPONSE TEST CIRCUIT OSCILLOSCOPE OSCILLOSCOPE RL VI 4/7 CL MC4558 PM-DIP8.EPS PACKAGE MECHANICAL DATA 8 PINS – PLASTIC DIP A a1 B b b1 D E e e3 e4 F i L Z Min. Millimeters Typ. 3.32 0.51 1.15 0.356 0.204 Max. 1.65 0.55 0.304 10.92 9.75 7.95 Min. 0.020 0.045 0.014 0.008 Max. 0.065 0.022 0.012 0.430 0.384 0.313 2.54 7.62 7.62 3.18 Inches Typ. 0.131 0.100 0.300 0.300 6.6 5.08 3.81 1.52 0.125 0260 0.200 0.150 0.060 DIP8.TBL Dimensions 5/7 MC4558 PM-SO8.EPS PACKAGE MECHANICAL DATA 8 PINS – PLASTIC MICROPACKAGE (SO) A a1 a2 a3 b b1 C c1 D E e e3 F L M S 6/7 Min. Millimeters Typ. 0.1 0.65 0.35 0.19 0.25 Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 Min. Inches Typ. 0.026 0.014 0.007 0.010 Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.189 0.228 0.197 0.244 0.004 o 45 (typ.) 4.8 5.8 5.0 6.2 1.27 3.81 3.8 0.4 0.050 0.150 4.0 1.27 0.6 0.150 0.016 o 8 (max.) 0.157 0.050 0.024 SO8.TBL Dimensions MC4558 PACKAGE MECHANICAL DATA 8 PINS – THIN SHRINK SMALL OUTLINE PACKAGE Dim. Millimeters Min. Typ. A Min. Typ. 1.20 A1 0.05 A2 0.80 b c D 2.90 Max. 0.05 0.15 0.01 1.05 0.031 0.19 0.30 0.007 0.15 0.09 0.20 0.003 0.012 3.10 0.114 4.50 0.169 8o 0o 0.75 0.09 E E1 Inches Max. 1.00 3.00 6.40 4.30 e 4.40 0o l 0.50 0.60 0.039 0.118 0.041 0.122 0.252 0.65 k 0.006 0.173 0.177 0.025 8o 0.0236 0.030 ORDER CODE : Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publ ication supersedes and replaces all information previously suppli ed. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics 1998 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 7/7