Low Voltage Variable Output LDO Regulator BA00BC0WFP/WT BA00BC0WFP 1.5±0.2 2.3±0.2 6.5±0.2 +0.2 5.1−0.1 0.5±0.1 2-C0.5 9.5±0.5 3 4 1.27 5 1.5 2 0.5 2.5 1 0.8 BA00BC0WFP/WT is a PNP output LDO regulator IC with the output current of 1A and a voltage accuracy of ±2%. Output voltage can be set (1.5V to 12V) by external resistor. Over-current protection circuit and thermal protection circuit are incorporated to prevent IC from being damaged by short and thermal break down. Dimension (Units : mm) 5.5±0.2 Description 0.5±0.1 1.0±0.2 TO252-5 Applications Printer, TV, DVD and Storage etc. + 0.3 – 0.1 7.0 + 0.3 – 0.1 4.5 φ 3.2 ± 0.1 + 0.3 – 0.1 2.8 + 0.2 – 0.1 8.0 ± 0.2 0.7 + 0.4 – 0.2 17.0 10.0 0.85 ± 0.2 1) Maximum output current : 1A 2) Output voltage setting by external resistor 3) Low drop-out voltage(1.5V to 12V) type with PNP output 4) Built-in over-current protection circuit to prevent IC from being damaged by short 5) Built-in thermal protection circuit for protecting thermal break down 6) Built-in ON/OFF switch to realize the shutdown current 0uA 7) TO252-5, TO220FP-5 package 8) C pin output voltage accuracy : ± 2% 13.5Min. Features 12.0 ± 0.2 1.8 ± 0.2 BA00BC0WT 1.2 0.8 1.778 0.5 ± 0.1 2.85 1 2 3 4 5 TO220FP-5 Absolute Maximum Ratings (Ta=25˚C) Parameter Supply voltage Symbol Limits Vcc 18 Pd 1300 *2 (TO252-5) Operating temperature range Topr -40 Storage temperature range Tstg -55 Power dissipation Unit *1 2000 *3 (TO220FP-5) V mW ~ +105 ~ +150 ˚C ˚C ˚C Junction temperature 150 Tjmax not however exceed Pd. *12 Do on 70mm x 70mm x 1.6mm glass-epoxy PCB Derating in done at 10.4mW/˚C for operating above Ta=25˚C *3 Mounted * Derating in done at 16mW/˚C for operating above Ta=25˚C Recommended Operating Conditions (Ta=25˚C) Parameter Input voltage Output current *4 Output voltage *4 Do not however, Vcc ≥ 3.3V Symbol Min. Typ. Max. Unit VCC Io VOUT 3.0 - 1.5 - 16.0 1 12.0 V A V Electrical Characteristics (Unless otherwise specified, Ta=25˚C, Vcc=3.3V, Io=200mA, R1=30kΩ, R2=30kΩ) Parameter Symbol Min. Typ. Max. Unit Shut down current ISD - 0 10 µA Vctl=0V Vc pin voltage Vc 1.225 1.250 1.275 V Io=50mA Output voltage Vo - 2.50 - V Io=200mA Dropout voltage ∆Vd - 0.3 0.5 V Vcc=3.0V Io 1.0 - - A Ripple rejection R.R. 44 55 - dB f=120Hz, ein=-20dBV, Io=100mA Line regulation Reg.I - 15 30 mV Vcc=4.5V → 16V Reg.L - 35 75 mV Io=0mA → 1A Tcvo - ±0.015 - Ib - 0.5 0.9 mA Io=0mA Ios - 0.4 - A Vcc=16V 2.0 - - 16 V ACTIVE MODE, Io=0mA OFF MODE, Io=0mA Peak output current Load regulation Temperature coefficient of output voltage Bias current Short circuit output current * Stand-by ON level Vth1 Stand-by OFF level Vth2 Iin Input high current • * 40 Conditions % / °C Io=5mA, Tj=0~125°C - 0.8 V 80 130 µA Vctl=3V, Io=0mA This product is not designed for protection against radioactive rays. Designed Guarantee.(Outgoing inspection is not done all products.) Measurement is done at Ta Tj, and variations in the parameter of all measurement(expect Temperature Coefficient of Output Voltage)caused by temperature change are not considered. Application Circuit [BA00BC0WFP] [BA00BC0WT] BA00BC0WFP Vcc 2 BA00BC0WT Vcc Vref OUT CTL 1 C 2 OUT 4 R2 CTL 5 TSD 1 Fin C TSD R1 OCP GND Vref OCP N.C. 3 GND 3 4 R2 5 R1