ON MPSA06G Amplifier transistor Datasheet

NPN − MPSA05, MPSA06*;
PNP − MPSA55, MPSA56*
*Preferred Devices
Amplifier Transistors
Voltage and Current are Negative
for PNP Transistors
http://onsemi.com
Features
COLLECTOR
3
COLLECTOR
3
MAXIMUM RATINGS
Rating
Symbol
Collector −Emitter Voltage
MPSA05, MPSA55
MPSA06, MPSA56
VCEO
Collector −Base Voltage
MPSA05, MPSA55
MPSA06, MPSA56
VCBO
Emitter −Base Voltage
VEBO
4.0
Vdc
Collector Current − Continuous
IC
500
mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
625
5.0
W
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
1.5
12
W
mW/°C
TJ, Tstg
−55 to +150
°C
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient
(Note 1)
RqJA
200
°C/W
Thermal Resistance, Junction−to−Case
RqJC
83.3
°C/W
Operating and Storage Junction
Temperature Range
PNP
NPN
• Pb−Free Packages are Available*
Value
Unit
Vdc
60
80
2
BASE
2
BASE
1
EMITTER
1
EMITTER
Vdc
60
80
TO−92
CASE 29
STYLE 1
1
12
3
STRAIGHT LEAD
BULK PACK
2
3
BENT LEAD
TAPE & REEL
AMMO PACK
THERMAL CHARACTERISTICS
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. RqJA is measured with the device soldered into a typical printed circuit board.
MARKING DIAGRAM
MPS
Axx
AYWW G
G
xx
= 05, 06, 55, or 56
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2007
April, 2007 − Rev. 3
1
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MPSA05/D
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
60
80
−
−
V(BR)EBO
4.0
−
Vdc
ICES
−
0.1
mAdc
−
−
0.1
0.1
100
100
−
−
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage (Note 2)
(IC = 1.0 mAdc, IB = 0)
V(BR)CEO
Vdc
MPSA05, MPSA55
MPSA06, MPSA56
Emitter −Base Breakdown Voltage
(IE = 100 mAdc, IC = 0)
Collector Cutoff Current
(VCE = 60 Vdc, IB = 0)
Collector Cutoff Current
(VCB = 60 Vdc, IE = 0)
(VCB = 80 Vdc, IE = 0)
mAdc
ICBO
MPSA05, MPSA55
MPSA06, MPSA56
ON CHARACTERISTICS
DC Current Gain
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
hFE
Collector −Emitter Saturation Voltage
(IC = 100 mAdc, IB = 10 mAdc)
VCE(sat)
−
0.25
Vdc
Base−Emitter On Voltage
(IC = 100 mAdc, VCE = 1.0 Vdc)
VBE(on)
−
1.2
Vdc
100
−
50
−
−
SMALL−SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (Note 3)
(IC = 10 mA, VCE = 2.0 V, f = 100 MHz)
fT
MHz
MPSA05
MPSA06
MPSA55
MPSA56
(IC = 100 mAdc, VCE = 1.0 Vdc, f = 100 MHz)
2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%.
3. fT is defined as the frequency at which |hfe| extrapolates to unity.
TURN−ON TIME
−1.0 V
5.0 ms
100
VCC
+VBB
+40 V
+40 V
RL
100
RL
OUTPUT
+10 V
tr = 3.0 ns
OUTPUT
RB
Vin
0
TURN−OFF TIME
VCC
* CS t 6.0 pF
5.0 mF
RB
Vin
* CS t 6.0 pF
5.0 mF
100
100
5.0 ms
tr = 3.0 ns
*Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities
Figure 1. Switching Time Test Circuits
http://onsemi.com
2
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
PNP
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz)
NPN
300
200
VCE = 2.0 V
TJ = 25°C
200
100
100
70
50
30
2.0
3.0
5.0 7.0 10
20
30
50
70 100
200
−5.0 −7.0 −10
−20 −30
−50 −70 −100
−200
100
TJ = 25°C
TJ = 25°C
70
C, CAPACITANCE (pF)
50
Cibo
10
8.0
Cobo
6.0
4.0
0.1
0.2
0.5
1.0
2.0
5.0
10
Cibo
30
20
Cobo
10
7.0
50
20
5.0
−0.1 −0.2
100
−0.5 −1.0
−2.0
−5.0
−10 −20
−50 −100
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. MPSA05/06 Capacitance
Figure 5. MPSA55/56 Capacitance
1.0 k
700
500
1.0 k
700
500
ts
300
200
100
70
50
tf
VCC = 40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
5.0 7.0 10
50
70 100
100
70
50
20
td @ VBE(off) = 0.5 V
30
200
30
tr
20
ts
300
t, TIME (ns)
C, CAPACITANCE (pF)
20
−2.0 −3.0
Figure 3. MPSA55/56 Current−Gain —
Bandwidth Product
20
10
30
Figure 2. MPSA05/06 Current−Gain —
Bandwidth Product
40
20
50
IC, COLLECTOR CURRENT (mA)
60
30
70
IC, COLLECTOR CURRENT (mA)
80
t, TIME (ns)
VCE = −2.0 V
TJ = 25°C
200 300
tf
VCC = −40 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
10
−5.0 −7.0 −10
500
td @ VBE(off) = −0.5 V
−20 −30
−50 −70 −100
tr
−200 −300
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 6. MPSA05/06 Switching Time
Figure 7. MPSA55/56 Switching Time
http://onsemi.com
3
−500
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
NPN
PNP
−1.0 k
−700
−500
100 ms
1.0 ms
300
20
10
1.0
MPSA05
2.0
3.0
5.0 7.0 10
TC = 25°C
TA = 25°C
−100
−70
−50
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
30
1.0 ms
1.0 s
−200
TA = 25°C
100
70
50
100 ms
−300
1.0 s
TC = 25°C
200
I C , COLLECTOR CURRENT (mA)
I C , COLLECTOR CURRENT (mA)
1.0 k
700
500
MPSA06
20
50
30
−30
−20
−10
70 100
CURRENT LIMIT
THERMAL LIMIT
SECOND BREAKDOWN LIMIT
MPSA55
−1.0
−2.0 −3.0
−5.0 −7.0 −10
MPSA56
−20 −30
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 8. MPSA05/06 Active−Region Safe
Operating Area
Figure 9. MPSA55/56 Active−Region Safe
Operating Area
400
400
TJ = 125°C
TJ = 125°C
VCE = −1.0 V
25°C
−55°C
100
80
60
1.0
1.0
2.0 3.0 5.0
10
20 30
50
100
200
25°C
−55°C
100
80
60
40
−0.5 −1.0 −2.0
200 300 500
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
Figure 10. MPSA05/06 DC Current Gain
Figure 11. MPSA55/56 DC Current Gain
−1.0
TJ = 25°C
VBE(on) @ VCE = 1.0 V
0.4
0.2
−500
TJ = 25°C
−0.8
VBE(sat) @ IC/IB = 10
0.6
VBE(sat) @ IC/IB = 10
−0.6
VBE(on) @ VCE = −1.0 V
−0.4
−0.2
VCE(sat) @ IC/IB = 10
0
0.5
−5.0 −10
IC, COLLECTOR CURRENT (mA)
0.8
V, VOLTAGE (VOLTS)
h FE, DC CURRENT GAIN
200
V, VOLTAGE (VOLTS)
h FE , DC CURRENT GAIN
VCE = 1.0 V
40
0.5
−50 −70 −100
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
1.0
2.0
5.0
VCE(sat) @ IC/IB = 10
10
20
50
100
200
0
−0.5
500
−1.0 −2.0
−5.0
−10
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 12. MPSA05/06 “ON” Voltages
Figure 13. MPSA55/56 “ON” Voltages
http://onsemi.com
4
−500
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
PNP
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
NPN
1.0
TJ = 25°C
0.8
IC =
250 mA
IC =
100 mA
IC =
50 mA
IC =
500 mA
0.6
0.4
IC =
10 mA
0.2
0
0.05
0.2
0.1
0.5
2.0
1.0
5.0
10
20
IC =
−250 mA
IC =
−100 mA
IC =
−50 mA
IC =
−500 mA
−0.6
−0.4
IC =
−10 mA
−0.2
0
−0.05 −0.1 −0.2
−0.5
−1.0
−2.0
−5.0
−10
−20
IB, BASE CURRENT (mA)
Figure 14. MPSA05/06 Collector Saturation
Region
Figure 15. MPSA55/56 Collector Saturation
Region
R qVB , TEMPERATURE COEFFICIENT (mV/°C)
R qVB , TEMPERATURE COEFFICIENT (mV/ °C)
−1.6
RqVB for VBE
−2.0
−2.4
−2.8
0.5
r(t), NORMALIZED TRANSIENT
THERMAL RESISTANCE
−0.8
IB, BASE CURRENT (mA)
−1.2
1.0
2.0
5.0
10
20
50
100
200
500
−50
−0.8
−1.2
−1.6
RqVB for VBE
−2.0
−2.4
−2.8
−0.5 −1.0 −2.0
−5.0
−10
−20
−50
−100 −200
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 16. MPSA05/06 Base−Emitter
Temperature Coefficient
Figure 17. MPSA55/56 Base−Emitter
Temperature Coefficient
−500
D = 0.5
0.3
0.2
0.2
0.1
0.05
0.1
0.07
0.05
TJ = 25°C
50
−0.8
1.0
0.7
0.5
−1.0
0.02
SINGLE PULSE
ZqJC(t) = r(t) • RqJC
TJ(pk) − TC = P(pk) ZqJC(t)
ZqJA(t) = r(t) • RqJA
TJ(pk) − TA = P(pk) ZqJA(t)
D CURVES APPLY FOR
POWER PULSE TRAIN
SHOWN READ TIME AT t1
(SEE AN469)
P(pk)
0.01
t1
SINGLE PULSE
0.03
t2
0.02
DUTY CYCLE, D = t1/t2
0.01
1.0
2.0
5.0
10
20
50
100
200
500
1.0 k
2.0 k
5.0 k
10 k
t, TIME (ms)
Figure 18. MPSA05, MPSA06, MPSA55 and MPSA56 Thermal Response
http://onsemi.com
5
20 k
50 k 100 k
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
ORDERING INFORMATION
Package
Shipping†
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Ammo Pack
TO−92
(Pb−Free)
2000 / Ammo Pack
TO−92
5000 Units / Bulk
MPSA06G
TO−92
(Pb−Free)
5000 Units / Bulk
MPSA06RL1G
TO−92
(Pb−Free)
2000 / Tape & Reel
MPSA06RLG
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Ammo Pack
TO−92
(Pb−Free)
2000 / Ammo Pack
TO−92
2000 / Ammo Pack
MPSA06RLRPG
TO−92
(Pb−Free)
2000 / Ammo Pack
MPSA55G
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
5000 Units / Bulk
TO−92
(Pb−Free)
5000 Units / Bulk
TO−92
2000 / Tape & Reel
TO−92
(Pb−Free)
2000 / Tape & Reel
TO−92
2000 / Ammo Pack
TO−92
(Pb−Free)
2000 / Ammo Pack
TO−92
2000 / Ammo Pack
TO−92
(Pb−Free)
2000 / Ammo Pack
TO−92
2000 / Ammo Pack
TO−92
(Pb−Free)
2000 / Ammo Pack
Device
MPSA05
MPSA05G
MPSA05RLRA
MPSA05RLRAG
MPSA05RLRM
MPSA05RLRMG
MPSA06
MPSA06RLRA
MPSA06RLRAG
MPSA06RLRM
MPSA06RLRMG
MPSA06RLRP
MPSA55RLRA
MPSA55RLRAG
MPSA56
MPSA56G
MPSA56RLRA
MPSA56RLRAG
MPSA56RLRM
MPSA56RLRMG
MPSA56RLRP
MPSA56RLRPG
MPSA56ZL1
MPSA56ZL1G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
http://onsemi.com
6
NPN − MPSA05, MPSA06*; PNP − MPSA55, MPSA56*
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
A
B
STRAIGHT LEAD
BULK PACK
R
P
L
SEATING
PLANE
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−−
0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
N
A
R
BENT LEAD
TAPE & REEL
AMMO PACK
B
P
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
T
SEATING
PLANE
K
D
X X
G
J
V
1
C
SECTION X−X
DIM
A
B
C
D
G
J
K
N
P
R
V
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.40
0.54
2.40
2.80
0.39
0.50
12.70
−−−
2.04
2.66
1.50
4.00
2.93
−−−
3.43
−−−
N
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MPSA05/D
Similar pages