ETC2 GS71108ASJ-7I 128k x 8 1mb asynchronous sram Datasheet

GS71108ATP/J/SJ/U
SOJ, TSOP, FP-BGA
Commercial Temp
Industrial Temp
7, 8, 10, 12 ns
3.3 V VDD
Center VDD and VSS
128K x 8
1Mb Asynchronous SRAM
Features
SOJ & TSOP-II 128K x 8-Pin Configuration
• Fast access time: 7, 8, 10, 12 ns
• CMOS low power operation: 140/120/95/80 mA at minimum
cycle time
• Single 3.3 V power supply
• All inputs and outputs are TTL-compatible
• Fully static operation
• Industrial Temperature Option: –40° to 85°C
• Package line up
J:
400 mil, 32-pin SOJ package
GJ : RoHS-compliant 400 mil, 32-pin SOJ package
TP: 400 mil, 32-pin TSOP Type II package
GP: RoHS-compliant 400 mil, 32-pin TSOP Type II
package
SJ: 300 mil, 32-pin SOJ package
U: 6 mm x 8 mm Fine Pitch Ball Grid Array package
GU: RoHS-compliant 6 mm x 8 mm Fine Pitch Ball Grid
Array package
A3
1
32
A4
A2
2
31
A5
A1
3
30
A6
A0
4
29
A7
CE
5
28
OE
DQ1
6
DQ8
DQ2
7
400 mil SOJ
27
26
DQ7
VDD
8
&
25
VSS
VSS
9
32-pin
DQ3
10
DQ4
11
WE
12
A16
24
300 mil SOJ
&
400 mil TSOP II
VDD
23
DQ6
22
DQ5
21
A8
13
20
A9
A15
14
19
A10
A14
15
18
A11
A13
16
17
A12
Packages J, TP, and SJ
Description
The GS71108A is a high speed CMOS Static RAM organized
as 131,072 words by 8 bits. Static design eliminates the need
for external clocks or timing strobes. The GS operates on a
single 3.3 V power supply and all inputs and outputs are TTLcompatible. The GS71108A is available in a 6 mm x 8 mm
Fine Pitch BGA package, as well as in 300 mil and 400 mil
SOJ and 400 mil TSOP Type-II packages.
Pin Descriptions
Fine Pitch BGA 128K x 8-Bump Configuration
1
2
3
4
5
6
A
NC
OE
A2
A6
A7
NC
B
DQ1
NC
A1
A5
CE
DQ8
C
DQ2
NC
A0
A4
NC
DQ7
D
VSS
NC
NC
A3
NC
VDD
E
VDD
NC
NC
NC
NC
VSS
Symbol
Description
A0–A16
Address input
F
DQ3
NC
A14
A11
DQ5
DQ6
DQ1–DQ8
Data input/output
G
DQ4
NC
A15
A12
WE
A8
CE
Chip enable input
H
NC
A10
A16
A13
A9
NC
WE
Write enable input
OE
Output enable input
VDD
+3.3 V power supply
VSS
Ground
NC
No connect
Rev: 1.08 6/2006
Package U
6 mm x 8 mm, 0.75 mm Bump Pitch
Top View
1/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Block Diagram
A0
Address
Input
Buffer
Row
Decoder
Memory Array
Column
Decoder
A16
CE
WE
OE
I/O Buffer
Control
DQ1
DQ8
Truth Table
CE
OE
WE
DQ1 to DQ8
VDD Current
H
X
X
Not Selected
ISB1, ISB2
L
L
H
Read
L
X
L
Write
L
H
H
High Z
IDD
Note:
X: “H” or “L”
Rev: 1.08 6/2006
2/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply Voltage
VDD
–0.5 to +4.6
V
Input Voltage
VIN
–0.5 to VDD +0.5
(≤ 4.6 V max.)
V
Output Voltage
VOUT
–0.5 to VDD +0.5
(≤ 4.6 V max.)
V
Allowable power dissipation
PD
0.7
W
Storage temperature
TSTG
–55 to 150
o
C
Note:
Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Recommended
Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device reliability.
Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Unit
Supply Voltage for -7/-8/-10/-12
VDD
3.0
3.3
3.6
V
Input High Voltage
VIH
2.0
—
VDD +0.3
V
Input Low Voltage
VIL
–0.3
—
0.8
V
Ambient Temperature,
Commercial Range
TAc
0
—
70
oC
Ambient Temperature,
Industrial Range
TAI
–40
—
85
o
C
Notes:
1. Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns.
2. Input undershoot voltage should be greater than –2 V and not exceed 20 ns.
Rev: 1.08 6/2006
3/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Capacitance
Parameter
Symbol
Test Condition
Max
Unit
Input Capacitance
CIN
VIN = 0 V
5
pF
Output Capacitance
COUT
VOUT = 0 V
7
pF
Notes:
1. Tested at TA = 25°C, f = 1 MHz
2. These parameters are sampled and are not 100% tested.
DC I/O Pin Characteristics
Parameter
Symbol
Test Conditions
Min
Max
Input Leakage
Current
IIL
VIN = 0 to VDD
–1 uA
1 uA
Output Leakage
Current
ILO
Output High Z
VOUT = 0 to VDD
–1 uA
1 uA
Output High Voltage
VOH
IOH = –4 mA
2.4
—
Output Low Voltage
VOL
ILO = +4 mA
—
0.4 V
Power Supply Currents
Parameter
Symbol
Test Conditions
IDD
CE ≤ VIL
All other inputs
≥ VIH or ≤ VIL
Min. cycle time
IOUT = 0 mA
Standby
Current
ISB1
CE ≥ VIH
All other inputs
≥ VIH or ≤VIL
Min. cycle time
Standby
Current
ISB2
CE ≥ VDD – 0.2 V
All other inputs
≥ VDD – 0.2 V or ≤ 0.2 V
Operating
Supply
Current
Rev: 1.08 6/2006
0 to 70°C
7 ns
8 ns
–40 to 85°C
10 ns
12 ns
7 ns
140 mA 120 mA
95 mA
80 mA
25 mA
20 mA
15 mA
20 mA
10 ns
12 ns
145 mA
125 mA 100 mA
85 mA
30 mA
25 mA
20 mA
2 mA
4/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
8 ns
25 mA
5 mA
© 2001, GSI Technology
GS71108ATP/J/SJ/U
AC Test Conditions
Output Load 1
Parameter
Conditions
Input high level
VIH = 2.4 V
Input low level
VIL = 0.4 V
50Ω
Input rise time
tr = 1 V/ns
VT = 1.4 V
Input fall time
tf = 1 V/ns
Input reference level
1.4 V
Output Load 2
Output reference level
1.4 V
3.3 V
Output load
Fig. 1& 2
DQ
30pF1
589Ω
DQ
Notes:
1. Include scope and jig capacitance.
2. Test conditions as specified with output loading as shown in Fig. 1
unless otherwise noted.
3. Output load 2 for tLZ, tHZ, tOLZ and tOHZ
5pF1
434Ω
AC Characteristics
Read Cycle
Parameter
Symbol
Read cycle time
-8
-7
-10
-12
Unit
Min
Max
Min
Max
Min
Max
Min
Max
tRC
7
—
8
—
10
—
12
—
ns
Address access time
tAA
—
7
—
8
—
10
—
12
ns
Chip enable access time (CE)
tAC
—
7
—
8
—
10
—
12
ns
Output enable to output valid (OE)
tOE
—
3
—
3.5
—
4
—
5
ns
Output hold from address change
tOH
3
—
3
—
3
—
3
—
ns
Chip enable to output in low Z (CE)
tLZ*
3
—
3
—
3
—
3
—
ns
Output enable to output in low Z (OE)
tOLZ*
0
—
0
—
0
—
0
—
ns
Chip disable to output in High Z (CE)
tHZ*
—
3.5
—
4
—
5
—
6
ns
Output disable to output in High Z (OE)
tOHZ*
—
3
—
3.5
—
4
—
5
ns
* These parameters are sampled and are not 100% tested
Rev: 1.08 6/2006
5/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Read Cycle 1: CE = OE = VIL, WE = VIH
tRC
Address
tAA
tOH
Data Out
Previous Data
Data valid
Read Cycle 2: WE = VIH
tRC
Address
tAA
CE
tAC
tHZ
tLZ
OE
tOE
Data Out
Rev: 1.08 6/2006
tOLZ
High impedance
tOHZ
DATA VALID
6/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Write Cycle
Parameter
Symbol
Write cycle time
-7
-8
-10
-12
Unit
Min
Max
Min
Max
Min
Max
Min
Max
tWC
7
—
8
—
10
—
12
—
ns
Address valid to end of write
tAW
5
—
5.5
—
7
—
8
—
ns
Chip enable to end of write
tCW
5
—
5.5
—
7
—
8
—
ns
Data set up time
tDW
3
—
4
—
5
—
6
—
ns
Data hold time
tDH
0
—
0
—
0
—
0
—
ns
Write pulse width
tWP
5
—
5.5
—
7
—
8
—
ns
Address set up time
tAS
0
—
0
—
0
—
0
—
ns
Write recovery time (WE)
tWR
0
—
0
—
0
—
0
—
ns
Write recovery time (CE)
tWR1
0
—
0
—
0
—
0
—
ns
Output Low Z from end of write
tWLZ*
3
—
3
—
3
—
3
—
ns
Write to output in High Z
tWHZ*
—
3
—
3.5
—
4
—
5
ns
* These parameters are sampled and are not 100% tested
Write Cycle 1: WE control
tWC
Address
tAW
tWR
OE
tCW
CE
tAS
tWP
WE
tDW
Data In
DATA VALID
tWHZ
Data Out
Rev: 1.08 6/2006
tDH
tWLZ
HIGH IMPEDANCE
7/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Write Cycle 2: CE control
tWC
Address
tAW
tWR1
OE
tAS
tCW
CE
tWP
WE
tDW
Data In
DATA VALID
Data Out
Rev: 1.08 6/2006
tDH
HIGH IMPEDANCE
8/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
32-Pin SOJ, 300 mil
D
e
GE
E
HE
c
A
A1
A
A2
1
Symbol
L
y
B
B1
Detail A
Q
Dimension in inch
Dimension in mm
min
nom
max
min
nom
max
A
0.125
—
0.148
3.175
—
3.76
A1
0.026
—
—
0.66
—
—
A2
0.095
0.100
0.105
2.41
2.54
2.67
B
0.013
0.017
0.021
0.33
0.43
0.53
B1
0.024
0.028
0.032
0.61
0.71
0.81
c
0.006
0.008
0.012
0.15
0.20
0.30
D
0.820
0.825
0.830
20.82
20.95
21.08
E
0.295
0.300
0.305
7.49
7.62
7.75
e
—
0.05
—
—
1.27
—
HE
0.330
0.335
0.340
8.38
8.51
8.64
GE
0.255
0.267
0.275
6.48
6.78
6.958
L
0.082
—
—
2.08
—
—
y
—
—
0.004
—
—
0.10
Q
0o
—
10o
0o
—
10o
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B1 does not include dambar protrusion/intrusion.
3. Controlling dimension: inches
Rev: 1.08 6/2006
9/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
32-Pin SOJ, 400 mil
D
e
GE
E
HE
c
A
A1
A
A2
1
Symbol
L
y
B
B1
Detail A
Q
Dimension in inch
Dimension in mm
min
nom
max
min
nom
max
A
—
—
0.146
—
—
3.70
A1
0.026
—
—
0.66
—
—
A2
0.105
0.110
0.115
2.67
2.80
2.92
B
0.013
0.017
0.021
0.33
0.43
0.53
B1
0.024
0.028
0.032
0.61
0.71
0.81
c
0.006
0.008
0.012
0.15
0.20
0.30
D
0.820
0.824
0.829
20.83
20.93
21.06
E
0.395
0.400
0.405
10.04
10.16
10.28
e
—
0.05
—
—
1.27
—
HE
0.430
0.435
0.440
10.93
11.05
11.17
GE
0.354
0.366
0.378
9.00
9.30
9.60
L
0.082
—
—
2.08
—
—
y
—
—
0.004
—
—
0.10
Q
0o
—
10o
0o
—
10o
Notes:
1. Dimension D& E do not include interlead flash.
2. Dimension B1 does not include dambar protrusion/intrusion.
3. Controlling dimension: inches
Rev: 1.08 6/2006
10/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
32-Pin TSOP-II, 400mil
32
D
c
1
e
b
Detail A
Q
L1
y
L
A1
A
A2
ZD
A
E
E1
Symbol
Dimension in inch
Dimension in mm
min
nom
max
min
nom
max
A
0.039
—
0.05
—
—
1.27
A1
0.002
—
0.006
0.01
—
0.15
A2
0.037
0.040
0.045
0.90
1.02
1.14
b
0.012
0.016
0.018
0.30
0.40
0.45
c
0.0047
0.0051
0.0062
0.12
0.13
0.16
D
0.820
0.825
0.830
20.82
20.95
21.08
ZD
—
0.037
—
—
0.95
—
E
0.455
0.463
0.471
11.56
11.76
11.96
E1
0.395
0.400
0.405
10.03
10.16
10.29
e
—
0.05
—
—
1.27
—
L
0.017
0.020
0.023
0.40
0.50
0.60
L1
0.024
0.031
0.039
0.60
0.80
1.00
y
0.00
—
0.003
0.00
—
0.76
Q
o
—
o
o
—
5o
0
5
0
Notes:
1. Dimension D includes mold flash, protrusions or gate burrs.
2. Dimension E does not include interlead flash
3. Controlling dimension: mm
Rev: 1.08 6/2006
11/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
6 mm x 8 mm Fine Pitch BGA
0.36(typ)
D
H
G
F
E
D
C
B
A
0.22 ± 0.05
1
0.75(typ).
3.75
3
4
5.25
Rev: 1.08 6/2006
12/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
Ball Dia. 0.35
Pitch 0.75
6
5
Bottom View
2
pin A1 index
1.20(max)
pin A1 index
units: mm
Top View
6.00 ± 0.10
8.00 ± 0.10
0.10
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Ordering Information
Part Number*
Package
Access Time
Temp. Range
Status
GS71108ATP-7
400 mil TSOP-II
7 ns
Commercial
MP
GS71108ATP-8
400 mil TSOP-II
8 ns
Commercial
MP
GS71108ATP-10
400 mil TSOP-II
10 ns
Commercial
MP
GS71108ATP-12
400 mil TSOP-II
12 ns
Commercial
MP
GS71108ATP-7I
400 mil TSOP-II
7 ns
Industrial
MP
GS71108ATP-8I
400 mil TSOP-II
8 ns
Industrial
MP
GS71108ATP-10I
400 mil TSOP-II
10 ns
Industrial
MP
GS71108ATP-12I
400 mil TSOP-II
12 ns
Industrial
MP
GS71108AGP-7
RoHS-compliant 400 mil TSOP-II
7 ns
Commercial
PQ
GS71108AGP-8
RoHS-compliant 400 mil TSOP-II
8 ns
Commercial
PQ
GS71108AGP-10
RoHS-compliant 400 mil TSOP-II
10 ns
Commercial
PQ
GS71108AGP-12
RoHS-compliant 400 mil TSOP-II
12 ns
Commercial
PQ
GS71108AGP-7I
RoHS-compliant 400 mil TSOP-II
7 ns
Industrial
PQ
GS71108AGP-8I
RoHS-compliant 400 mil TSOP-II
8 ns
Industrial
PQ
GS71108AGP-10I
RoHS-compliant 400 mil TSOP-II
10 ns
Industrial
PQ
GS71108AGP-12I
RoHS-compliant 400 mil TSOP-II
12 ns
Industrial
PQ
GS71108ASJ-7
300 mil SOJ
7 ns
Commercial
MP
GS71108ASJ-8
300 mil SOJ
8 ns
Commercial
MP
GS71108ASJ-10
300 mil SOJ
10 ns
Commercial
MP
GS71108ASJ-12
300 mil SOJ
12 ns
Commercial
MP
GS71108ASJ-7I
300 mil SOJ
7 ns
Industrial
MP
GS71108ASJ-8I
300 mil SOJ
8 ns
Industrial
MP
GS71108ASJ-10I
300 mil SOJ
10 ns
Industrial
MP
GS71108ASJ-12I
300 mil SOJ
12 ns
Industrial
MP
GS71108AJ-7
400 mil SOJ
7 ns
Commercial
MP
GS71108AJ-8
400 mil SOJ
8 ns
Commercial
MP
GS71108AJ-10
400 mil SOJ
10 ns
Commercial
MP
GS71108AJ-12
400 mil SOJ
12 ns
Commercial
MP
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS71108ATP-8T.
2. MP = Mass Production. PQ = Pre-Qualification.
Rev: 1.08 6/2006
13/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Ordering Information
Part Number*
Package
Access Time
Temp. Range
Status
GS71108AJ-7I
400 mil SOJ
7 ns
Industrial
MP
GS71108AJ-8I
400 mil SOJ
8 ns
Industrial
MP
GS71108AJ-10I
400 mil SOJ
10 ns
Industrial
MP
GS71108AJ-12I
400 mil SOJ
12 ns
Industrial
MP
GS71108AGJ-7
RoHS-compliant 400 mil SOJ
7 ns
Commercial
PQ
GS71108AGJ-8
RoHS-compliant 400 mil SOJ
8 ns
Commercial
PQ
GS71108AGJ-10
RoHS-compliant 400 mil SOJ
10 ns
Commercial
PQ
GS71108AGJ-12
RoHS-compliant 400 mil SOJ
12 ns
Commercial
PQ
GS71108AGJ-7I
RoHS-compliant 400 mil SOJ
7 ns
Industrial
PQ
GS71108AGJ-8I
RoHS-compliant 400 mil SOJ
8 ns
Industrial
PQ
GS71108AGJ-10I
RoHS-compliant 400 mil SOJ
10 ns
Industrial
PQ
GS71108AGJ-12I
RoHS-compliant 400 mil SOJ
12 ns
Industrial
PQ
GS71108AU-7
6 mm x 8 mm Fine Pitch BGA
7 ns
Commercial
MP
GS71108AU-8
6 mm x 8 mm Fine Pitch BGA
8 ns
Commercial
MP
GS71108AU-10
6 mm x 8 mm Fine Pitch BGA
10 ns
Commercial
MP
GS71108AU-12
6 mm x 8 mm Fine Pitch BGA
12 ns
Commercial
MP
GS71108AU-7I
6 mm x 8 mm Fine Pitch BGA
7 ns
Industrial
MP
GS71108AU-8I
6 mm x 8 mm Fine Pitch BGA
8 ns
Industrial
MP
GS71108AU-10I
6 mm x 8 mm Fine Pitch BGA
10 ns
Industrial
MP
GS71108AU-12I
6 mm x 8 mm Fine Pitch BGA
12 ns
Industrial
MP
GS71108AGU-7
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
7 ns
Commercial
PQ
GS71108AGU-8
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
8 ns
Commercial
PQ
GS71108AGU-10
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
10 ns
Commercial
PQ
GS71108AGU-12
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
12 ns
Commercial
PQ
GS71108AGU-7I
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
7 ns
Industrial
PQ
GS71108AGU-8I
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
8 ns
Industrial
PQ
GS71108AGU-10I
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
10 ns
Industrial
PQ
GS71108AGU-12I
RoHS-compliant 6 mm x 8 mm Fine Pitch BGA
12 ns
Industrial
PQ
Notes:
1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS71108ATP-8T.
2. MP = Mass Production. PQ = Pre-Qualification.
Rev: 1.08 6/2006
14/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
Rev: 1.08 6/2006
15/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
GS71108ATP/J/SJ/U
1Mb Asynchronous Datasheet Revision History
Rev. Code: Old;
New
Types of Changes
Format or Content
Page #/Revisions/Reason
• Creation of new datasheet
71108A_r1
71108A_r1; 71108A_r1_01
Content
• Added 6 ns speed bin to entire document
71108A_r1_01; 71108A _r1_02
Content
• Updated all power numbers
• Changed 6 mm x 10 mm package designator from U to X
71108A_r1_02; 71108A _r1_03
Content
• Updated Recommended Operating Conditions table on page 3
• Updated Power Supply Currents table
• Changed FPBGA package from 6 x 10 to 6 x 8 (package U)
71108A_r1_03; 71108A _r1_04
Content
• Removed 6 ns speed bin from entire document
• Added 7 ns speed bin to entire document
71108A_r1_04; 71108A _r1_05
Content
• Added missing 300 mil SOJ mechanical drawing
71108A_r1_05; 71108A _r1_06
Content
• Updated format
• Added RoHS-compliant information for TSOP-II package
71108A_r1_06; 71108A _r1_07
Content
• Added RoHS-compliant information for FP-BGA package
71108A_r1_07; 71108A _r1_08
Content
• Added RoHS-compliant 400 mil, 32-pin SOJ
Rev: 1.08 6/2006
16/16
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
© 2001, GSI Technology
Similar pages