MCL4151 Vishay Telefunken Silicon Epitaxial Planar Diode Features D Electrical data identical with the device 1N4151 D Micro Melf package 96 12315 Applications Extreme fast switches Absolute Maximum Ratings Tj = 25_C Parameter Repetitive peak reverse voltage Reverse voltage Peak forward surge current Repetitive peak forward current Forward current Average forward current Power dissipation Junction temperature Storage temperature range Test Conditions Type Symbol VRRM VR IFSM IFRM IF IFAV PV Tj Tstg tp=1ms VR=0 Value 75 50 2 450 200 150 500 175 –65...+175 Unit V V A mA mA mA mW °C °C Maximum Thermal Resistance Tj = 25_C Parameter Junction ambient Document Number 85567 Rev. 3, 01-Apr-99 Test Conditions mounted on epoxy–glass hard tissue, Fig. 1, 35mm copper clad, 0.9 mm2 copper area per electrode Symbol RthJA Value 500 Unit K/W www.vishay.de • FaxBack +1-408-970-5600 1 (4) MCL4151 Vishay Telefunken Electrical Characteristics Tj = 25_C Parameter Forward voltage Reverse voltage g Test Conditions IF=50mA VR=50V VR=50V, Tj=150°C IR=5mA, tp/T=0.01, tp=0.3ms VR=0, f=1MHz, VHF=50mV IF=IR=10mA, iR=1mA IF=10mA, VR=6V, iR=0.1xIR, RL=100W Breakdown voltage Diode capacitance Reverse recovery y time Type Symbol VF IR IR V(BR) CD trr trr Min Typ 0.88 Max 1 50 50 75 2 4 2 Unit V nA mA V pF ns ns Characteristics (Tj = 25_C unless otherwise specified) 0.71 1.3 Wave Soldering 1.27 95 10331 1.4 0.152 9.9 0.355 25 0.7 1.4 0.7 2.8 10 Figure 3. Recommended foot pads (in mm) 2.5 100 Scattering Limit Figure 1. Board for RthJA definition (in mm) Reflow Soldering 95 10330 1.2 I R – Reverse Current ( mA ) 24 95 10329 10 1 0.1 VR = 50 V 0.01 0.6 1.2 0.6 0 94 9151 40 80 120 160 200 Tj – Junction Temperature ( °C ) 2.4 Figure 2. Recommended foot pads (in mm) www.vishay.de • FaxBack +1-408-970-5600 2 (4) Figure 4. Reverse Current vs. Junction Temperature Document Number 85567 Rev. 3, 01-Apr-99 MCL4151 Vishay Telefunken 3.0 CD – Diode Capacitance ( pF ) IF – Forward Current ( mA ) 1000 Tj = 100°C 100 10 Tj = 25°C 1 f = 1 MHz Tj = 25°C 2.0 1.5 1.0 0.5 0 0.1 0 94 9152 2.5 0.4 0.8 1.2 1.6 2.0 VF – Forward Voltage ( V ) Figure 5. Forward Current vs. Forward Voltage 0.1 1 10 100 VR – Reverse Voltage ( V ) 94 9153 Figure 6. Diode Capacitance vs. Reverse Voltage Dimensions in mm 96 12072 Document Number 85567 Rev. 3, 01-Apr-99 www.vishay.de • FaxBack +1-408-970-5600 3 (4) MCL4151 Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 www.vishay.de • FaxBack +1-408-970-5600 4 (4) Document Number 85567 Rev. 3, 01-Apr-99