HITRON HVP180-23 Universal input harmonic correction ac-dc open frame dual output 180 watts internal switching power supply Datasheet

H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION AC-DC
OPEN FRAME DUAL OUTPUT 180 WATTS INTERNAL
SWITCHING POWER SUPPLIES HVP180 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
OR-ING DIODES FOR PARALLEL OPERATION
MEET IEC1000-3-2 HARMONIC CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typ. 90-264Vac with PFC.
Input Connector: AMP 643495-2 connector or
Molex 5273-5A.
Input Frequency: 47-63Hz.
Inrush Current: Typ. 30A @ 230Vac.
Input Current: Typ. 2.4A@115Vac, 1.2A @230Vac.
Dielectric Withstand: Meet IEC950.
EMI: Meet CISPR PUB. 22 Class B.
Hold-up Time: Typ. 30mS @115Vac & 230Vac.
Power OK Signal: Installed.
Power Factor Correction: Meet Harmonic Correction
per IEC1000-3-2 PF typ. 0.97-0.98.
Over Temperature Protection: By thermostat.
Earth Leakage: Typ. 0.5 mA @230Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: AMP 640445-0 & 640456-2 or
Molex 5273-10A & 6410-2A.
Output Wattage: Typ. 180 watts.
Line Regulation: Typ. 0.1%.
Load Regulation: Main O/P VO1 ±1% typ.
Aux. O/P VO2 ±5% typ.
(Common choke & stacked on VO1.)
Noise & Ripple: Typ. 1% peak to peak.
OVP: Built-in at main O/P VO1 only.
Remote Sensing: Available at VO1.
OR-ing diodes: Installed in each output.
Adjustability: Available at VO1.
Overload Protection (OLP): Fully protected against
output overload and short circuit.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 73-76%.
Switching Frequency: Fixed frequency at 65K Hz.
Circuit Topology: PWM fixed-frequency forward circuit.
Transient Response: Output voltage returns in less than
3ms following a 25% load change.
Safety Standard: UL1950/EN60950 Class I.
Operating Temperature: 0 to +50ºC.
Storage Temperature: -20 to +85ºC.
Temperature Coefficient: 0.04%/ºC.
Cooling: Recommended 30 cfm fan cooling for full load.
Construction: U-bracket format.
Power Density: 3.43 Watts / Cubic Inch.
In application
-59-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
MODEL NO.
HVP180-21
MAIN VO1 @★#⊙
Typ.
Volt.
25.0A
+5.0V
AUX. VO2 ■⊙†
Typ.
Volt.
5.0A
+12.0V
HVP180-22
25.0A
+5.0V
4.0A
+15.0V
HVP180-23
25.0A
+5.0V
3.0A
+24.0V
HVP180-290
25.0A
+3.3V
10.0A
+5.0V
HVP180-291
25.0A
+3.3V
5.0A
+12.0V
HVP180-292
25.0A
+3.3V
4.0A
+15.0V
HVP180-293
25.0A
+3.3V
3.0A
+24.0V
Symbol: "★" OVP built-in. "@" Adjustable. "†" Stacked on main O/P.
"■" Couple Filter Choke. "⊙" With Or-ing diode. "#" Remote sensing.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 940.0g (33.1 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
DUAL OUTPUT
ASSIGNMENT AC-L AC-N AC-G
VO1
VO2
DC-COM
PFS
CNTR & PIN # P1-5. P1-3. P1-1. P2-11,12,13,14,15 P2-2 P2-3,4,5,6,7,8 P2-1
Mating connecter: P1: AMP 640426-5 or Molex 5239-5A.
P2: AMP 640427-0 or Molex 5239-10A, 5195-10A.
P3 & P4: AMP 640440-2 or Molex 2695-2A.
-60-
+VO1 #
P2-9
ASSORTED SIGNALS
-VO1 #
FAN (-)
P2-10
P3-1,P4-1
FAN (+)
P3-2,P4-2
Similar pages