MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Features
Rev. V1
GND
GND
V C1
V C2
Pin No.
Pin Name
Description
1
GND
Ground
2
GND
Ground
3
VC1
Control 1
4
ANT1
Antenna Port 1
5
GND
Ground
6
ANT2
Antenna Port 2
7
VC2
Control 2
8
GND
Ground
9
GND
Ground
10
Rx
Receive Port
11
GND
Ground
12
Tx
The MASW-007587 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
Ordering Information 1
Package
MASW-007587-TR3000
3000 piece reel
MASW-007587-000SMB
Sample Test Board
(Includes 5 Samples)
GND
Pin Configuration
Typical applications include 2.5 & 3.5 GHz WiMax,
WLAN MESH networks, fixed wireless access, and
other higher power systems. Designed for high
power, this DPDT switch maintains high linearity up
to 4.0 GHz.
Part Number
ANT2
GND
ANT1
GND
Description
M/A-COM’s MASW-007587 is a broadband GaAs
PHEMT MMIC diversity switch available in a leadfree 3 mm 12-lead PQFN package. The MASW007587 is ideally suited for applications where very
small size and high linear power are required.
Rx
Tx
Ideal for high power diversity switch applications
including WiMax, WLAN MESH Networks, and
Fixed Wireless Access
Broadband Performance: DC - 4.0 GHz
Low Insertion Loss: 0.8 dB @ 2.5 GHz and
1.2 dB @ 3.5 GHz
High P1dB Compression: 39.5 dBm @ 5 V
Fast Settling for Low Gate Lag Requirements
Lead-Free 3 mm 12-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free ―Green‖ Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
GND
Functional Schematic
13
Transmit Port
2
Paddle
RF and DC Ground
2. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
1. Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, Z0 = 50, VC = 0 V / 3 V, 39 pF Capacitor 3
Parameter
Test Conditions
Units
Min.
Typ.
Max.
0.5 - 1 GHz
1 - 2 GHz
2 - 3 GHz
2.45 GHz
3 - 4 GHz
dB
dB
dB
dB
dB
—
—
—
—
—
0.6
0.7
0.8
0.8
1.2
—
—
—
1.2
—
Isolation (on/off or off/on)
Iso @ Tx when IL from Ant 2 to Rx
Iso @ Rx when IL from Ant 1 to Tx
0.5 - 1 GHz
1 - 2 GHz
2 - 3 GHz
2.45 GHz
3 - 4 GHz
dB
dB
dB
dB
dB
—
—
—
24
—
41.5
35
30
30
27
—
—
—
—
—
Isolation (on/off or off/on)
Iso @ Tx when IL from Ant 1 to Rx
Iso @ Rx when IL from Ant 2 to Tx
0.5 - 1 GHz
1 - 2 GHz
2 - 3 GHz
2.45 GHz
3 - 4 GHz
dB
dB
dB
dB
dB
—
—
—
29
—
46.5
43
38
38
32
—
—
—
—
—
Return Loss
0.5 - 1 GHz
1 - 2 GHz
2 - 3 GHz
3 - 4 GHz
dB
dB
dB
dB
—
—
—
—
14
15
19.5
14
—
—
—
—
IP3
Two Tone, +15 dBm/Tone, 5 MHz Spacing, 2.4 GHz
VC = 3 V
VC = 5 V
VC = 8 V
dBm
dBm
dBm
—
—
—
57.5
59
60
—
—
—
Input P1dB
2.4 GHz, VC = 3 V
2.4 GHz, VC = 5 V
2.4 GHz, VC = 8 V
dBm
dBm
dBm
—
—
—
34
39.5
41
—
—
—
2nd Harmonic
2.4 GHz, Pin = 15 dBm
dBc
—
-86
—
3 Harmonic
2.4 GHz, Pin = 15 dBm
dBc
—
-91
—
Trise, Tfall
10% to 90% RF
90% to 10% RF
nS
nS
—
—
64
80
—
—
Ton, Toff
50% control to 90% RF and 50% control to 10% RF
nS
—
90
—
Transients
—
mV
—
5
—
Control Current
—
µA
—
5
10
Insertion Loss
4
rd
3. For positive voltage control, external DC blocking capacitors are required on all RF ports.
4. Insertion loss can be optimized by varying the DC blocking capacitor value. For use above 2.5 GHz, M/A-COM recommends using
smaller capacitor values. For example, use 5 pF for 3.2 GHz.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Rev. V1
Evaluation Board for 3 mm 12-Lead PQFN
C1
C4
C2
C3
U1
Absolute Maximum Ratings 5,6
Parameter
Absolute
Maximum
Input Power @ 3 V Control
+35 dBm CW
Input Power @ 5 V Control
+37 dBm CW
Voltage
8 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM does not recommend sustained operation near
these survivability limits.
Application Schematic
Truth Table 7,8
Control
VC1
Control
VC2
ANT 1 ANT 1 ANT 2 ANT 2
- Rx
- Tx
- Tx
- Rx
1
0
On
Off
On
Off
0
1
Off
On
Off
On
7. Differential voltage, V (state 1) - V (state 0), must be
+2.7 V minimum and must not exceed 8.0 V.
8. 1 = +2.9 V to +8 V, 0 = 0 V + 0.2 V.
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
C1 = C2 = C3 = C4 = 39 pF
Handling Procedures
C2
Please observe the following precautions to avoid
damage:
Rx
Tx
GND
C1
GND
GND
Vc2
C4
C3
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
ANT2
Vc1
GND
GND
ANT1
GND
Static Sensitivity
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Rev. V1
Typical Performance Curves
Insertion Loss, 4 pF Capacitors
Insertion Loss, 39 pF Capacitors
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0
0
1
2
3
4
5
6
0
1
Frequency (GHz)
2
3
4
5
6
Frequency (GHz)
Isolation, 4 pF Capacitors
Isolation, 39 pF Capacitors
50
50
Iso @
Iso @
Iso @
Iso @
45
Tx when IL from Ant 1 to Rx
Rx when IL from Ant 2 to Tx
Tx when IL from Ant 2 to Rx
Rx when IL from Ant 1 to Tx
Iso @
Iso @
Iso @
Iso @
45
40
40
35
35
30
30
25
25
20
Tx when IL from Ant 1 to Rx
Rx when IL from Ant 2 to Tx
Tx when IL from Ant 2 to Rx
Rx when IL from Ant 1 to Tx
20
0
1
2
3
4
5
6
0
1
Frequency (GHz)
2
3
4
5
6
Frequency (GHz)
S11,
S11,
0
0
-3
-3
-6
-6
-9
-9
-12
-12
-15
-15
-18
-18
-21
0
1
2
3
4
Frequency (GHz)
5
6
-21
0
1
2
3
4
5
6
Frequency (GHz)
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Rev. V1
Lead-Free 3 mm 12-Lead PQFN†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-007587
High Power GaAs DPDT Diversity Switch
DC - 4.0 GHz
Rev. V1
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support