Fuji FCN-362J008-AU Rectangular connector Datasheet

RECTANGULAR CONNECTORS
FCN360 Series
FCN-365J
FCN-365P
FCN-364P
FCN-364P
FCN-364J
FCN-364J
FCN-365J
FCN-364P
FCN-365P
FCN-364J
FCN-362J
FCN-363J
FCN-365P
FCN-367J
FCN-361P
FCN-365P
FCN-364P
FCN-365J
With type B cover
FCN-364P
FCN-365P
With type E cover
FCN-364J
With type J1 cover
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
1
Terms in Selection Table (Example)
700 series
Model
Appearance
Contact pitch
Denotes a pitch between adjacent contacts or
pitch between rows.
2.54 mm (0.100 in.) (pitch between adjacent
contacts) x 2.54 mm (0.100 in.) (pitch between
rows)
Number of contacts
Denotes the numbers of contacts of available
connectors.
2.54 × 2.54
Contact pitch
Number of contacts
10, 14, 16, 20, 26, 30,
34, 40, 50, 60
Wire-wrapping
(post cross section)
Pin type
Structure
Solder eyelet
(tail shape)
0.64
Straight, throughhole (PC
board hole dimensions)
IDC (applicable
AWG No.)
φ 0.8, 2.54 × 2.54
P
J
P
J
φ 0.8, 2.54 × 2.54
#28, Flat cable
#28, Flat cable
Gold
Silver
Specification
Tin
Operating temperature
range
–55°C to +105°C
Current rating
DC 1 A
Voltage rating
AC 250 V
Contact resistance
20 mΩ max.
(DC 6 V, 0.1 A)
Insulation resistance
(DC 500 V)
1,000MΩ min.
Dielectric withstanding
voltage (for 1 minute)
AC 500 V
Insulation material
cleaning with Chlorothene
Polyester
cleaning possible
Part number (example)
FCN-705P050-AU/M
FCN-707J050-AU/B
Remarks
Plating
Denotes the contact plating specification.
Specifications
4
Operating temperature range
The connector can be used within the specified
temperature range.
Crimping (applicable
AWG No.)
Right-angle, throughhole
(PC board hole dimensions)
Plating
P
J
Connection type
Denotes the connection type of the cable or PC
board connection section.
EMI protection cover
provided
Current rating
Maximum current that can flow through one
connector pin
Voltage rating
Maximum voltage that can be applied to a
connector
Contact resistance
Resistance observed at the contact part when
0.3 A (or 0.1 A) flows at 6 VDC with the connectors
mated
Insulation resistance
Resistance to the leakage current flowing through
the insulator (inside or surface of the insulator)
when 500 VDC is applied across adjacent pins of a
connector
Dielectric withstanding voltage
Applying the indicated voltage across adjacent
pins of a connector for one minute does not cause
any abnormality (damage or cracks in insulator).
Insulating material, cleaning with chlorothene
Denotes the insulating material used, and
indicates whether the insulating material can be
cleaned with chlorothene.
Part number
Some part numbers are indicated as examples.
4-2
Selection Table
Rectanglar Connectors
360 series
Model
Appearance
Contact pitch
2.54 × 2.54
Number of contacts
8, 16, 24, 32, 40, 48,
56, 64
P
J
Wire-wrapping
(post cross section)
Pin type
Structure
Solder eyelet
(tail shape)
Plating
1.8 × 0.7
1.8 × 0.7
4
Diagonal 0.71 mm
(0.028 in.)
Crimping ( applicable
AWG No.)
P
J
AWG #22 to #28
Straight, through hole (PC
board hole dimensions)
Right-angle, through hole
(PC board hole dimensions)
P
J
P
J
φ1, 2.54 × 2.54
φ1, 2.54 × 2.54
φ1, 2.54 × 2.54
φ1, 2.54 × 2.54
IDC ( applicable
AWG No.)
P
J
#28, Flat cable
Gold
Silver
Specification
Tin
Operating temperature
range
–55°C to +85°C
Current rating
DC 3 A (IDC type: 1A)
Voltage rating
AC 250 V
Contact resistance
15 mΩ max.
(DC 6 V, 0.3 A)
Insulation resistance
(DC 500 V)
1,000 MΩ min.
Dielectric withstanding
voltage (for 1 minute)
AC 500 V
Insulating material
Polyester
PC (363J)
Part number (example)
Remarks
FCN-361P024-AU
Cable cover provided
4-3
FCN-360 Series
NOTES
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
4
RECTANGULAR CONNECTORS
FCN-360 SERIES
■ FEATURES
• Many applications
Various connectors are available for connection by
means of soldering, wire wrapping, crimping, PC board
mounting, and insulation displacement connection
(IDC). The user can choose a plug and jack
combination that best meet each application.
• Small size for high-density mounting
The connectors are small with a contact and terminal
pitch of 2.54 mm (0.100 in.) between pins and between
rows and are thus well suited for high-density mounting.
• Sturdy shell guide
Sturdy shell guides are used to prevent mismating and
to protect the pins.
• Excellent cost performance
Streamlined design and automated manufacturing,
including use of partial solder plating, provide excellent
cost performance.
■ SPECIFICATIONS
■ MATERIALS
Specification
Item
Item
Material
Operating temperature range
–55°C to +85°C
Insulator
Polyester (363J: PC94V-2)
Current Rating
DC 3 A (IDC type: 1 A)
Conductor
Copper alloy
Voltage Rating
AC 250 V
Plating
Gold plating, silver plating
Contact resistance
15 mΩ max. (DC 6 V, 0.3 A)
Insulation resistance
1000 MΩ min. (DC 500 V)
Dielectric withstanding voltage
AC 500 V for 1 minute
Insertion force
2.5 kg max. (8 contacts), 20 kg max. (64 contacts)
Withdrawal force
0.3 kg min. (8 contacts), 2.3 kg min. (64 contacts)
Applicable
wire
Soldering
φ0.60 mm (0.024 in.) max, AWG #23 or less
Wire-wrapping
φ0.32 mm (0.013 in.) to φ0.26 mm (0.010 in.), AWG #28 to #30
Crimping
Standard contacts φ0.51 mm (0.020 in.) to φ0.32 mm (0.013
in.), AWG #24 to #28, insulator φ1.2 mm (0.047 in.) max.
Contacts for thick wires φ0.64 mm (0.025 in.) to φ0.32 mm
(0.013 in.), AWG #22 to #28, insulator φ1.7 (0.067 in.) max.
IDC
Flat cable 1.27 mm (0.050 in.) pitch, AWG #28 (stranded wire),
AWG #30 (solid wire)
Applicable PC board
Specifications
subject to change
1.6 mm (0.063 in.) standard thick
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
5
FCN-360 Series
■ PART NUMBER
FCN-36 7 J 048-AU / H
(Only for IDC)
Shape of connector cover with IDC holders
B: Close end (special)
F: Close end
H: Through end
Plating and cover specification
AU: Gold plating
B:
Type B cover (standard)
C:
Type C cover (for cable-to-cable connection)
D:
Type D cover (with metal cable clamp)
E:
Type E cover (with long lock-screws)
F:
Type F cover (64 contacts only)
G1: One-touch lock type (40 contacts only)
H/E: EMI protection type (40 contacts only)
J1: Obtuse angle cable-out cover (40 contacts only)
Number of contacts
8, 16, 24, 32, 40, 48, 56, 64
Connector or parts type
A: Metal fitting
C: Cover
J: Jack
P: Plug
Tail type
0: Cover, metal fitting
1: Soldering
2: Wire-wrapping
3: Crimping
4: Straight
5: Right-angle
7: IDC
360 series connector
Fujitsu connector
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
6
FCN-360 Series
■ APPLICATION EXAMPLE
FCN-365J
FCN-365P
FCN-364P
FCN-364P
FCN-364J
FCN-364J
FCN-365J
FCN-364P
FCN-365P
FCN-364J
FCN-362J
FCN-363J
FCN-365P
FCN-367J
FCN-361P
FCN-365P
FCN-364P
FCN-365J
With type B cover
FCN-364P
FCN-365P
With type E cover
FCN-364J
With type J1 cover
FCN-365P
FCN-365J
With type G1 cover
With type Ccover
With type H/E cover
Specifications
subject to change
Dimensions are in millimeters (inches)
With type E cover
www.fujitsu.takamisawa.com
7
FCN-360 Series
6 (0.236)
2.54 (0.10)
8.25 (0.324)
SOLDERING TYPE (PLUG)
■ DIMENSIONS
2.54 (0.10)
B
5 (0.196)
4 (0.157)
A
5.8 (0.228)
12.1 (0.476)
D
0.7 (0.027)
B A
1.5 (0.059)
1 2
C
φ2.8 (0.110)
Unit: mm (in.)
8.6(0.338) ±0.2(0.007)
■ MOUTING HOLE LAYOUT
[Panel]
(C + 1)±0.3
((C + 0.039)±0.011 )
B
+0.15(0.005)
φ2.8(0.110) –0
hole
Unit: mm (in.)
±0.15 (0.005)
■ PART NUMBERS AND DIMENSIONS
Dimensions: mm (in.)
Number of
contacts
Part number
A
B
C
D
8
FCN-361P008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-361P016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-361P024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-361P032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-361P040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-361P048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-361P056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-361P064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
8
FCN-360 Series
2.54 (0.10)
6 (0.236)
8.25 (0.324)
SOLDERING TYPE (JACK)
■ DIMENSIONS
2.54 (0.10)
D
A
5 (0.198)
4 (0.157)
6 (0.236)
5.8 (0.228)
10.8 (0.425)
B
0.7 (0.027)
0.5 (0.019)
1.5 (0.059)
A B
1
C
φ2.8 (0.110)
Unit: mm (in.)
8.6 (0.338) ±0.2(0.007)
■ BOARD MOUTING HOLE LAYOUT
[Panel]
(C + 1)±0.3
((C + 0.039) ±0.011 )
B
+0.15(0.005)
φ2.8 (0.110) –0
hole
Unit: mm (in.)
±0.15 (0.005)
■ PART NUMBERS AND DIMENSIONS
Dimensions: mm (in.)
Number of
contacts
Part number
A
B
C
D
8
FCN-361J008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-361J016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-361J024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-361J032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-361J040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-361J048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-361J056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-361J064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
9
FCN-360 Series
2.54 (0.10)
8.25 (0.324)
WIRE-WRAP TYPE (PLUG)
■ DIMENSIONS
2.54 (0.10)
D
B
10.8 (0.425)
4 (0.157)
10.3 (0.405)
A
0.71 (0.027)
B A
Diagonal length
C
φ2.8 (0.110)
Unit: mm (in.)
[Board]
D
B
[Panel]
(C + 1) ±0.3
((C + 0.039)±0.011 )
+0.15(0.005)
φ2.8 (0.110) –0
hole
±0.2 (0.007)
±0.15 (0.005)
8.6 (0.338) ±0.2(0.007)
2.54 (0.10) ±0.15(0.009)
■ MOUTING HOLE LAYOUT
φ1 (0.039)+0.1(0.0034) hole
B
+0.15(0.005)
φ2.8 (0.110) –0
hole
±0.15 (0.005)
Unit: mm (in.)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
8
Dimensions: mm (in.)
A
B
C
D
FCN-362P008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-362P016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-362P024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-362P032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-362P040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-362P048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-362P056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-362P064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
10
FCN-360 Series
2.54 (0.10)
6 (0.236)
8.25 (0.324)
WIRE-WRAP TYPE (JACK)
■ DIMENSIONS
2.54 (0.10)
D
A
13.5 (0.531)
5.8 (2.283)
6 (0.236)
4 (0.157)
10.8 (0.425)
B
0.71 (0.027)
Diagonal length
1
A B
C
φ2.8 (0.110)
Unit: mm (in.)
D
±0.2 (0.007)
B
±0.15 (0.005)
8.6 (0.338) ±0.2(0.007)
[Board]
2.54 (0.10) ±0.15(0.009)
■ MOUTING HOLE LAYOUT
[Panel]
(C + 1) ±0.3
((C + 0.039) ±0.011 )
+0.15(0.005)
φ2.8 (0.110) –0
hole
φ1 (0.039) +0.1(0.0034) hole
B
φ2.8 (0.110) +0.15(0.005)
hole
–0
Unit: mm (in.)
±0.15 (0.005)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
8
Dimensions: mm (in.)
A
B
C
D
FCN-362J008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-362J016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-362J024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-362J032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-362J040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-362J048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-362J056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-362J064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
11
FCN-360 Series
2.54 (0.10)
6 (0.236)
8.25 (0.324)
CRIMP TYPE (JACK HOUSING)
■ DIMENSIONS
2.54 (0.10)
D
10.8 (0.425)
B
5.8 (2.283)
A
4 (0.157)
22 (0.866)
6 (0.236)
C
6 (0.236)
Pin 1 in row A
φ2.8 (0.110)
Pin 1 in row B
Unit: mm (in.)
8.6 (0.338) ±0.2(0.007)
■ MOUTING HOLE LAYOUT
[Panel]
(C + 1)±0.3
((C + 0.039)±0.011 )
B
+0.15(0.005)
φ2.8 (0.110) –0
hole
Unit: mm (in.)
±0.15 (0.005)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
8
16
24
32
40
48
56
64
Part number
FCN-363J008
FCN-363J016
FCN-363J024
FCN-363J032
FCN-363J040
FCN-363J048
FCN-363J056
FCN-363J064
Specifications
subject to change
A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
Dimensions: mm (in.)
B
C
23.34 (0.918)
17.84 (0.702)
33.5 (1.318)
28.0 (1.102)
43.66 (1.718)
38.16 (1.502)
53.82 (2.118)
48.32 (1.902)
63.98 (2.518)
58.48 (2.302)
74.14 (2.918)
68.64 (2.702)
84.3 (3.318)
78.8 (3.102)
94.46 (3.718)
88.96 (3.502)
Dimensions are in millimeters (inches)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
www.fujitsu.takamisawa.com
12
FCN-360 Series
CRIMP TYPE (CONTACT)
■ DIMENSIONS
Standard contact (applicable wire: AWG #24 to
#28)
Thick wire connection contact (applicable wire:
AWG #22 to #26)
20.05 (0.789)
20.05 (0.789)
Unit: mm (in.)
■ PART NUMBERS
Type
Plating
Standard
Thick wire connection contact
Loose piece
Gold plating
FCN-363J-AU
FCN-363J-AU/S
Strip reeled
Gold plating
FCN-363J-AU/R
FCN-363J-AU/T
■ PART NUMBERS OF CRIMPING TOOLS
Part number
Contact type
Applicable
wire
Wire cross-section
area (mm2)
Crimp height
Stripped
length
Insulator
diameter
FCN-363T-T005/H
(Hand crimping tool)
FCN-363J-AU
(Loose piece)
AWG #24
0.20 to 0.24
1.25 mm (0.049 in.) to
φ1.2 mm
1.30 mm (0.051 in.) (0.047 in.) max
3.0 mm (0.118 in.) to
4.0 mm (0.157 in.)
FCN-M110
(Automatic crimping machine)
FCN-363J-AU/R
(Strip reeled)
AWG #26
0.13 to 0.16
1.20 mm (0.047 in.) to
φ1.2 mm
1.25 mm (0.049 in.) (0.047 in.) max
3.0 mm (0.118 in.) to
4.0 mm (0.157 in.)
AWG #28
0.088 to 0.096
1.15 mm (0.045 in.) to
φ1.2 mm
1.20 mm (0.047 in.) (0.047 in.) max
3.0 mm (0.118 in.) to
4.0 mm (0.157 in.)
FCN-A105
(Applicator)
FCN-363T-T011/H
(Hand crimping tool)
FCN-363J-AU/S
(Loose piece)
AWG #22
0.30 to 0.40
0.85 mm (0.033 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to
0.95 mm (0.037 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.)
FCN-M110
(Automatic crimping machine)
FCN-363J-AU/T
(Strip reeled)
AWG #24
0.20 to 0.24
0.75 mm (0.029 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to
0.85 mm (0.033 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.)
AWG #26
0.13 to 0.16
0.73 mm (0.028 in.) to φ0.9 mm (0.035 in.) 3.0 mm (0.118 in.) to
0.81 mm (0.031 in.) 1.8 mm (0.071 in.) 4.0 mm (0.157 in.)
FCN-A111
(Applicator)
[Semi-automatic crimping machine, [Contact withdrawal tool]
applicator]
10 (0.393)
[Hand crimping tool]
65 (2.559)
FCN-360T-T001/H
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
13
FCN-360 Series
2.54 (0.10)
8.25 (0.324)
STRAIGHT TYPE (PLUG)
■ DIMENSIONS
2.54 (0.10)
D
A
4.2 (0.165)
4 (0.157)
10.3 (0.405)
B
0.71 (0.027)
Diagonal length
B A
1
φ2.8 (0.110)
C
Unit: mm (in.)
2.54 (0.10) ±0.15(0.009)
■ BOARD MOUTING HOLE LAYOUT
[Board]
±0.2 (0.007)
D
B
±0.15 (0.005)
+0.15(0.005)
φ2.8 (0.110) –0
hole
φ1 (0.039) +0.1(0.0034) hole
Unit: mm (in.)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
8
Dimensions: mm (in.)
A
B
C
D
FCN-364P008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-364P016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-364P024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-364P032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-364P040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-364P048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-364P056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-364P064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
14
FCN-360 Series
2.54 (0.10)
6 (0.236)
8.25 (0.324)
STRAIGHT TYPE (JACK)
■ DIMENSIONS
2.54 (0.10)
D
A
5.8 (0.228)
6 (0.236)
4 (0.157)
4.2 (0.165)
10.8 (0.425)
B
0.71 (0.027)
Diagonal length
φ2.8 (0.110)
A B
1
C
Unit: mm (in.)
2.54 (0.10) ±0.15(0.009)
■ BOARD MOUTING HOLE LAYOUT
[Board]
D
B
±0.2 (0.007)
±0.15 (0.005)
φ2.8 (0.110) +0.15(0.005)
hole
–0
φ1 (0.039) +0.1(0.0034) hole
Unit: mm (in.)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
8
Dimensions: mm (in.)
A
B
C
D
FCN-364J008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-364J016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-364J024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-364J032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-364J040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-364J048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-364J056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-364J064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
15
FCN-360 Series
4 (0.157)
2.54 (0.10)
8.25 (0.324)
RIGHT-ANGLE TYPE (JACK)
■ DIMENSIONS
2.54 (0.10)
D
C
2.54 (0.10)
φ2.8 (0.110)
8 (0.314)
5 (0.196)
5 (0.196)
11 (0.433)
A
3 (0.118)
B
AB
1
0.8 (0.031)
Diagonal length
Unit: mm (in.)
D
±0.2 (0.007)
2.54 (0.10) ±0.15(0.009)
Edge of board
5 (0.196)
[Board]
3.27 (0.128) ±0.15(0.005)
■ MOUTING HOLE LAYOUT
• Note on mounting a right-angle jack on a
board
Mount the connector so that it projects from the
board by at least 5 mm (0.197 in.).
+0.15(0.005)
φ2.8 (0.110)–0
hole
B
±0.15 (0.005)
φ1 (0.039) +0.1(0.0034) hole
Unit: mm (in.)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
8
Dimensions: mm (in.)
A
B
C
D
FCN-365J008-AU
28.84 (1.135)
23.34 (0.918)
17.84 (0.702)
7.62 (0.3)
16
FCN-365J016-AU
39.0 (1.535)
33.5 (1.318)
28.0 (1.102)
17.78 (0.7)
24
FCN-365J024-AU
49.16 (1.935)
43.66 (1.718)
38.16 (1.502)
27.94 (1.1)
32
FCN-365J032-AU
59.32 (2.335)
53.82 (2.118)
48.32 (1.902)
38.1 (1.5)
40
FCN-365J040-AU
69.48 (2.735)
63.98 (2.518)
58.48 (2.302)
48.26 (1.9)
48
FCN-365J048-AU
79.64 (3.135)
74.14 (2.918)
68.64 (2.702)
58.42 (2.3)
56
FCN-365J056-AU
89.8 (3.535)
84.3 (3.318)
78.8 (3.102)
68.58 (2.7)
64
FCN-365J064-AU
99.96 (3.935)
94.46 (3.718)
88.96 (3.502)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
18
FCN-360 Series
IDC TYPE (JACK)
■ DIMENSIONS
[Connector body]
2.54 (0.10)
A
B
5 (0.196)
11.5 (0.452)
C
8.25
(0.324)
6 (0.236)
2.54 (0.10)
4 (0.157)
A
[Closed-end type]
[Strain relief]
8.25
(0.324)
5 (0.196)
4 (0.157)
5 (0.196)
[Connector cover with IDC holders]
8.25
(0.324)
8.25
(0.324)
A
[Through-end type]
6 (0.236)
15.7 (0.618)
A
10 (0.393)
31 (1.220)
[Lock-screw]
M2.6 (0.102)
φ5 (0.196)
Unit: mm (in.)
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
Part number
Through-end cover
Close-end cover
A
Dimensions: mm (in.)
B
D
8
FCN-367J008-AU/H
FCN-367J008-AU/F
28.84 (1.135)
23.34 (0.918)
7.62 (0.3)
16
FCN-367J016-AU/H
FCN-367J016-AU/F
39.0 (1.535)
33.5 (1.318)
17.78 (0.7)
24
FCN-367J024-AU/H
FCN-367J024-AU/F
49.16 (1.935)
43.66 (1.718)
27.94 (1.1)
32
FCN-367J032-AU/H
FCN-367J032-AU/F
59.32 (2.335)
53.82 (2.118)
38.1 (1.5)
40
FCN-367J040-AU/H
FCN-367J040-AU/F
69.48 (2.735)
63.98 (2.518)
48.26 (1.9)
48
FCN-367J048-AU/H
FCN-367J048-AU/F
79.64 (3.135)
74.14 (2.918)
58.42 (2.3)
56
FCN-367J056-AU/H
FCN-367J056-AU/F
89.8 (3.535)
84.3 (3.318)
68.58 (2.7)
64
FCN-367J064-AU/H
FCN-367J064-AU/F
99.96 (3.935)
94.46 (3.718)
78.74 (3.1)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
19
FCN-360 Series
IDC TOOLS
Special IDC tools are used to assemble FCN-360 series
connectors and flat cables.
■ FEATURES
• The mechanisms are simple, so even novices can use
them easily.
• Those who already have Fujitsu-manufactured IDC tools
for other series connectors need only purchase the
locator plate.
The hand press and cable cutter are designed to be used
in common with all connectors.
• The assembly of cables and connectors with various
numbers of contacts can be done by selective setting of
the connector guides to the specified positions.
Hand press
Cable cutter
• The cable cutter has an extremely sharp cutting edge.
Locator plate (That
for the 790 series
is shown in the
photograph.)
Notes: • A detailed operation manual and instruction
manual for IDC tools are available upon request.
• Should any question arise in using the IDC tools,
consult our branch offices or agents in your
area.
■ ORDERING CODES FOR IDC TOOLS
Tool name
Part number
Cable cutter (common)
FCN-707T-T001/H
Hand press (common)
FCN-707T-T101/H
Locator plate (for 360 series connectors)
FCN-367T-T012/H
The hand press and cable cutter can be used for other IDC connectors.
COVER
■ COMBINATIONS BETWEEN COVERS AND CONNECTORS
Connector
Cover
Plug
Soldering
Jack
Soldering
Wire-wrapping
Number of contacts
Crimping
8
16
24
32
40
48
56
64
FCN-360C ■■■
■■■-B
FCN-360C ■■■
■■■-C
FCN-360C ■■■
■■■-D
FCN-360C ■■■
■■■-E
FCN-360C064-F
FCN-360C040-G1
FCN-360C040-H/E
FCN-360C040-J1
These covers cannot be used for IDC connectors.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
20
FCN-360 Series
COVER (TYPE B)
■ DIMENSIONS
R: 2.84 mm (0.112 in.) (8 and 16 contacts)
R: 4.0 mm (0.157 in.) (24 to 64 contacts)
G
H
R
14 mm (0.551 in.) max
10.3 (0.405)
46 (1.811)
37 (1.456)
28 (1.102)
B
1 (0.039)
FUJITSU
F
Unit: mm (in.)
■ EXPLODED VIEW
Two M2 mm (0.079 in.)
thread × 8 mm (0.315 in.)
long pan head machine
screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two M2 mm (0.079 in.) thread × 10 mm (0.394 in.)
long pan head machine screws (longer)
Two washers
Case
Connector
Two lock-screws
Note: The screws, nuts, washers, and lock-screws
are attached to the cover.
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
8
16
24
32
40
48
56
64
Part number
FCN-360C008-B
FCN-360C016-B
FCN-360C024-B
FCN-360C032-B
FCN-360C040-B
FCN-360C048-B
FCN-360C056-B
FCN-360C064-B
Specifications
subject to change
B
23.34 (0.918)
33.50 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.30 (3.318)
94.46 (3.718)
Dimensions: mm (in.)
F
G
32.08 (1.262)
—
42.24 (1.662)
—
52.40 (2.062)
—
62.56 (2.462)
2.0 (0.078)
72.72 (2.862)
6.0 (0.236)
82.88 (3.262)
10.0 (0.393)
93.04 (3.662)
14.0 (0.551)
103.20 (4.062)
18.0 (0.708)
Dimensions are in millimeters (inches)
H
φ 5.7 (0.224)
φ 5.7 (0.224)
φ 8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
www.fujitsu.takamisawa.com
21
FCN-360 Series
COVER FOR CABLE TO CABLE CONNECTION (TYPE C)
■ DIMENSIONS
G
R: 2.84 mm (0.112 in.) (8 and 16 contacts)
R
H
R: 4.0 mm (0.157 in.) (24 and 64 contacts)
14 mm (0.551 in.) max.
Note: This cover can be
combined with a cover of
type B, D, or E for cableto-cable connection.
46 (1.811)
28 (1.102
10.3 (0.405)
1
(0.039)
FUJITSU
F
Metal fittings
Unit: mm (in.)
■ EXPLODED VIEW
Two M2 mm (0.079 in.)
thread × 8 mm (0.315 in.)
long pan head machine
screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two M2 mm (0.079 in.)
thread × 10 mm (0.394 in.)
long pan head machine
screws (longer)
Two screws for mounting
metal fittings
Two washers
Connector
Case
Two metal fittings
Connector
Note: The screws, nuts, washers, and accessory
are attached to the cover.
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
8
16
24
32
40
48
56
64
Part number
FCN-360C008-C
FCN-360C016-C
FCN-360C024-C
FCN-360C032-C
FCN-360C040-C
FCN-360C048-C
FCN-360C056-C
FCN-360C064-C
Specifications
subject to change
F
32.08 (1.262)
42.24 (1.662)
52.40 (2.062)
62.56 (2.462)
72.72 (2.862)
82.88 (3.262)
93.04 (3.662)
103.20 (4.062)
Dimensions are in millimeters (inches)
Dimensions: mm (in.)
G
—
—
—
2.0 (0.078)
6.0 (0.236)
10.0 (0.393)
14.0 (0.551)
18.0 (0.708)
H
φ 5.7 (0.224)
φ 5.7 (0.224)
φ 8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
www.fujitsu.takamisawa.com
22
FCN-360 Series
COVER (WIDE OPENING TYPE) (TYPE D)
■ DIMENSIONS
10.5
(0.413)
I
7.5
(0.295)
Cable clamp
14 mm (0.551 in.) max.
B
FUJITSU
46 (1.811)
37 (1.456)
28 (1.102)
1 (0.039)
10.3 (0.405)
F
Unit: mm (in.)
■ EXPLODED VIEW
Four M2 mm (0.079 in.)
thread × 8 mm (0.315 in.)
long pan head machine
screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two cable clamps
Case
Connector
Two lock-screws
Note: The screws, nuts, cable clamp, and lockscrews are attached to the cover.
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
40
48
56
64
Part number
FCN-360C040-D
FCN-360C048-D
FCN-360C056-D
FCN-360C064-D
Specifications
subject to change
B
63.98 (2.518)
74.14 (2.918)
84.30 (3.318)
94.46 (3.718)
Dimensions are in millimeters (inches)
Dimensions: mm (in.)
F
72.72 (2.862)
82.88 (3.262)
93.04 (3.662)
103.20 (4.062)
I
8.0 (0.314)
12.0 (0.472)
16.0 (0.629)
20.0 (0.789)
www.fujitsu.takamisawa.com
23
FCN-360 Series
COVER (LONG-SCREW TYPE) (TYPE E)
■ DIMENSIONS
R
G
R: 2.84 mm (0.112 in.) (8 and 16 contacts)
H
R: 4.0 mm (0.157 in.) (24 and 64 contacts)
14 mm (0.551 in.) max.
B
FUJITSU
53 (2.086)
46 (1.811)
28 (1.102)
1 (0.039)
10.3 (0.405)
F
Unit: mm (in.)
■ EXPLODED VIEW
Two M2 mm (0.079 in.)
thread × 8 mm (0.315 in.)
long pan head machine
screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two M2 mm (0.079 in.) thread × 10 mm (0.394 in.)
long pan head machine screws (longer)
Two washers
Case
Connector
Two lock-screws
Note: The screws, nuts, washers, and lock-screws
are attached to the cover.
■ PART NUMBERS AND DIMENSIONS
Number of
contacts
8
16
24
32
40
48
56
64
Part number
FCN-360C008-E
FCN-360C016-E
FCN-360C024-E
FCN-360C032-E
FCN-360C040-E
FCN-360C048-E
FCN-360C056-E
FCN-360C064-E
Specifications
subject to change
B
23.34 (0.918)
33.50 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.30 (3.318)
94.46 (3.718)
Dimensions: mm (in.)
F
G
32.08 (1.262)
—
42.24 (1.662)
—
52.40 (2.062)
—
62.56 (2.462)
2.0 (0.078)
72.72 (2.862)
6.0 (0.236)
82.88 (3.262)
10.0 (0.393)
93.04 (3.662)
14.0 (0.551)
103.20 (4.062)
18.0 (0.708)
Dimensions are in millimeters (inches)
H
φ 5.7 (0.224)
φ 5.7 (0.224)
φ 8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
8.0 (0.314)
www.fujitsu.takamisawa.com
24
FCN-360 Series
COVER (STRAIGHT CABLE-OUT COVER) (TYPE F)
■ DIMENSIONS
Section S
19.5 (0.767)
17.5 (10.688)
10 (0.393)
6 (0.236)
94.46 (3.718)
8 (0.314)
Detail of section S
14 mm (0.551 in.) max.
30.5 (1.200)
FUJITSU
103.2 (4.062)
55 (2.165)
46 (1.811)
37 (1.456)
1 (0.039)
28 (1.102)
10.3 (0.405)
Unit: mm (in.)
■ EXPLODED VIEW
Six M2 mm (0.079 in.)
thread × 8 mm (0.315 in.)
long pan head machine
screws
Six M2 mm (0.079 in.) thread nuts
Two cable clamps
Case
Connector
Two lock-screws
Note: The screws, nuts, cable clamps, and lockscrews are attached to the cover.
■ PART NUMBER
FCN-360C064-F
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
25
FCN-360 Series
COVER (RIGHT ANGLE CABLE-OUT COVER) (TYPE G1)
■ DIMENSIONS
20 (0.787)
19
(0.748)
6 (0.236)
20 (0.787)
F
17
(0.669)
ø9 (0.354)
10
(0.393)
81.48 (3.207)
17 (0.669)
14.65 (0.576)
Unit: mm (in.)
■ EXPLODED VIEW
Case
Connector
Two cable clamps
Slider
Case
Two M2.6 mm (0.102 in.) thread × 8 mm (0.315 in.)
long pan head machine screws
6 (0.236)
■ LOCKED STATE
■ METAL FITTINGS
Metal fittings
FCN-360A11
F
PC board
Note: After connectors are mated, moving the
slider locks the connectors.
1 mm (0.039 in.) min.
Note: The FCN-360
A11-metalfittings
are
used for this
cover.
■ PART NUMBER
FCN-360C040-G1
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
26
FCN-360 Series
COVER (RIGHT ANGLE CABLEOUT COVER) (TYPE H/E)
■ DIMENSIONS
Material: Zync die cast
Plating: Nickel plating
63.98 (2.518)
43.98 (1.731)
M2.5 (0.098) × 8 (0.314)
1 (0.039)
17
(0.669)
1 (0.039)
φ11 (0.433)
Cable hole
19 (0.748)
12 (0.472)
1 (0.039)
F
72.48 (2.853)
46 (1.811)
M2.5 (0.039)
Through-hole
10 (0.393)
Unit: mm (in.)
■ EXPLODED VIEW
Two M2.5 mm (0.098 in.) thread × 5 mm (0.197 in.)
long pan head machine screws
Two M2.5 mm (0.098 in.) thread × 8 mm (0.315 in.)
long pan head machine screws
Case
Connector
Cable clamp
Two lock-screws
Note: The screws, cable clamp, and lock-screws
are attached to the cover.
■ PART NUMBER
FCN-360C040-H/E
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
27
FCN-360 Series
COVER (OBTUSE ANGLE CABLE-OUT COVER (40 CONTACTS ONLY)) (TYPE J1)
■ DIMENSIONS
φ12 (0.472)
M2.6 (0.102) × 25 (0.984)
Cable hole
Two screws
63.98 (2.518)
20 (0.787)
24 (0.944)
Three screws
F
71.73 (2.824)
10.3 (0.405)
7
1 (0.039)
46 (1.811)
M2 (0.078) × 14 (0.511)
Unit: mm (in.)
■ EXPLODED VIEW
Three M2 mm (0.079 in.) thread × 14 mm (0.551 in.)
long screws
Two M2.6 mm (0.102 in.) thread × 25 mm (0.984 in.)
long screws
Case
Two M2.6 mm (0.102 in.)
thread × 12 mm (0.472 in.)
long screws
Connector
Cable clamp
Case
Two M2.6 mm (0.102 in.) thread nuts
Three M2 mm (0.079 in.) thread nuts
■ PART NUMBER
FCN-360C040-J1
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
28
FCN-360 Series
LOW PROFILE COVER (OBTUSE ANGLE CABLE -OUT) (TYPE J2)
■ DIMENSION
0
8.7
Part number: FCN-360C024-J2 (24 contacts)
17.9
M2.6 mm (0.102 in.) thread
machine screw with washer
Part number: FCN-360C040-J2 (40 contacts)
X)
MA )
6 ( (MIN
5
12
51.41 (2.024)
20°
M2 (0.078)
View from B
M2.6 mm machine
screw with washer
22
12.75
25
R4
View from B
B
M2 (0.078)
46 (1.811)
B
24 (0.944)
30˚
9.5 (0.374)
29.66 (1.167)
M2 (0.078)
F
1 (0.039)
1 (0.039)
24 (0.944)
46 (1.811)
M2 (0.078)
10.3 (0.405)
63.98
71.73
F
10.3 (0.405)
43.66 (1.718)
Unit: mm (in.)
■ EXPLODED VIEW
Three M2 mm (0.079 in.) thread
× 8 mm (0.315 in.) long screws
Two M2.6 mm (0.102 in.) thread
× 25 mm (0.984 in.) long screws
Case
Two M2.6 mm (0.102 in.)
thread × 6 mm (0.236 in.)
long screws
Connector
Cable clamp
Case
Two M2.6 mm (0.102 in.) thread nuts
Three M2 mm (0.079 in.) thread nuts
■ PART NUMBER
FCN-360C024-J2
FCN-360C040-J2
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
29
FCN-360 Series
ACCESSORIES
■ MOUNTING SYLE
[Straight mounting metal fitting]
[Right-angle mounting metal fitting]
Jack with cover
Metal fitting
[Straight mounting round metal fitting]
Plug or jack
Plug
Jack with cover or
plug with cover
Jack with cover or
plug with cover
PCB
Metal fitting
Plug or jack
PCB
Metal fitting
M2.6 × 8
PCB
M2.6 × 10
Note: The M2.6 mm (0.102 in.) thread ×
8 mm (0.315 in.) long machine screw
shall be separately prepared.
M2.6 × 8
Note: The M2.6 mm (0.102 in.) thread ×
10 mm (0.394 in.) long machine screw
shall be separately prepared.
Note: The M2.6 mm (0.102 in.) thread ×
8 mm (0.315 in.) long machine screw
shall be separately prepared.
■ SELECTION OF METAL FITTINGS ACCORDING TO COMBINATION OF CONNECTORS
AND COVERS
Jack
Cover mounting side
361J
Plug
363J
367J
—
FCN-360A5
—
FCN-360A6
364P
FCN-360A4 FCN-360A5 FCN-360A4 FCN-360A5 FCN-360A4 FCN-360A5 FCN-360A4 FCN-360A5
Metal
FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6
fitting part
number
FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6 FCN-360A1 FCN-360A6
—
FCN-360A6
365P
FCN-360A2 FCN-360A3 FCN-360A2 FCN-360A3 FCN-360A2 FCN-360A3 FCN-360A2 FCN-360A3
—
FCN-360A3
362P
Plug
Cover mounting side
361P
Jack
Metal
fitting
mounting
side
364J
With cover Without cover With cover Without cover With cover Without cover With cover Without cover With cover Without cover
361P
Metal
fitting
mounting
side
362J
361P
364P
With cover
Without cover
With cover
Without cover
With cover
Without cover
361J
FCN-360A4
FCN-360A5
—
FCN-360A7
—
FCN-360A7
362J
FCN-360A4
FCN-360A5
—
FCN-360A7
—
FCN-360A7
363J
FCN-360A4
FCN-360A5
—
FCN-360A7
—
FCN-360A7
FCN-360A4
FCN-360A5
—
FCN-360A7
—
FCN-360A7
365J
FCN-360A10
(FCN-360A8)
FCN-360A9
—
FCN-360A9
—
FCN-360A9
367J
FCN-360A4
FCN-360A5
—
FCN-360A7
—
FCN-360A7
364J
Metal
fitting part
number
Note: When the jack or plug without a cover (shaded part) is used, have M2.6 × 8 mm machine screws ready
inorder to tighten the connector.
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
30
FCN-360 Series
■ SHAPES AND DIMENSIONS OF METAL FITTINGS
1.Straight Mounting Metal Fittings
Part number
Shape
FCN-360A1
FCN-360A6
5.3 (0.208)
6.3 (0.248)
FCN-360A2
FCN-360A3
B
3 (0.118)
4 (0.157)
C
9 (0.354)
10 (0.393)
FCN-360A8
FCN-360A9
B
5.3 (0.208)
6.3 (0.248)
C
13.3 (0.523)
14.3 (0.526)
Symbol
8.25
(0.326)
M2.6 (0.102)
A
5.5 (0.216)
A
Unit: mm (in.)
2.Right-angle Mounting Metal Fittings
Part number
Shape
Symbol
4 (0.157)
7
(0.275)
M2.6 (0.102)
B
C
5.5
(0.216)
Unit: mm (in.)
Part number
Shape
Symbol
4 (0.157)
7.5
(0.295)
M2.6 (0.102)
B
C
5.4
(0.212)
Unit: mm (in.)
Part number
Part number
FCN-360A10
Symbol
FCN-360A11
Symbol
1
(0.039)
8.1
(0.318)
7.5
(0.295)
4
(0.157)
M2.6 (0.102)
1
6
(0.039) (0.236)
3 (0.118)
M2.6 (0.102)
7
(0.275)
4 (0.157)
4.6
(0.181)
5.5
(0.216)
M2.6 (0.102)
5.5 (0.216)
5.3 (0.208)
Unit: mm (in.)
Unit: mm (in.)
3.Straight Mounting Round Metal Fittings
Part number
Shape
Symbol
FCN-360A4
FCN-360A5
FCN-360A7
7.1(0.279)
9.9 (0.389)
8.1 (0.318)
6
(0.236)
M2.6 (0.102)
D
D
5.25 (0.206)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
31
FCN-360 Series
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: [email protected]
www.fcal.fujitsu.com
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 09/2001
Specifications
subject to change
Dimensions are in millimeters (inches)
www.fujitsu.takamisawa.com
32
Similar pages