Microsemi LSP1012 Enhanced performance surface mount epsm pin diodes tm Datasheet

LSP1000 – LSP1012
ENHANCED PERFORMANCE SURFACE MOUNT
EPSM® PIN Diodes
®
TM
RoHS Compliant
DESCRIPTION
KEY FEATURES
 High Performance
 Surface Mount
 Available on Tape
 Multiple Configurations to Choose
From
1
 RoHS Compliant
Other configurations are available - consult factory for details. When
ordering specify configuration (example: LSP1004-454-4 is a
common cathode dual pin).
www.MICROSEMI.com
The LSP series of Enhanced Performance Surface Mount (EPSM)
PIN diodes offers the circuit designer a higher level of quality in a
commercially priced package. Choose from LSP1000, LSP1004,
and LSP1008 for switching applications, LSP1002, LSP1005,
LSP1010 and LSP1011 for low distortion attenuation from VHF
through 5 GHz. They are available in a host of configurations (see
configuration table for internal wiring.) The LSP products are
supplied with a RoHS compliant gold finish.
 Low Cost
APPLICATIONS
Specify EPSM package style 450A or 454. For 3 terminal style 454,
refer to configuration page. Example: LSP1001-454-4 is a common
cathode pair of PIN diodes for broadband switching applications; for
the 2 terminal style 450A, refer to the outline dimension table.
APPLICATIONS/BENEFITS
Example: LSP1001-450A is a single device with a 0.075 x 0.050
outline.
 High Performance Wireless
Surface Mount Options for
GSM, TAGS, WANS, PCS
 Wideband Switching
 Broadband Attenuators
 Phase Shifters
ABSOLUTE MAXIMUM RATINGS AT 25º C
 Broadband Limiters
(UNLESS OTHERWISE SPECIFIED)
Rating
Value
Unit
IR
50
nA
Storage Temperature
TSTG
-65 to +125
ºC
Operating Temperature
TOP
-65 to +125
ºC
Power Dissipation
PD
500
mW
Forward Current (1uS Pusle)
IF
1
A
Maximum Leakage Current
@80% of Minimum Rated VB
IMPORTANT: For the most current data, consult our website: www.MICROSEMI.com
Specifications are subject to change, consult factory for the latest information.
1
LSP1000-LSP1012
Symbol
The EPSM products are supplied with a
RoHS complaint Gold finish
.
These devices are ESD sensitive and must be handled using ESD precautions.
Copyright  2007
Rev: 2009-09-10
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 1
LSP1000 – LSP1012
ENHANCED PERFORMANCE SURFACE MOUNT
EPSM® PIN Diodes
®
TM
RoHS Compliant
EPSM PIN Diodes
.
ELECTRICAL PARAMETERS @ 25C (unless otherwise specified)
CT(pF)1
@VR
(Max)
0.28
0.32
0.75
LSP1011
LSP1012
200
20
0.35
0.35
Model Number
Notes
1.
2.
3.
VR (V)
5
50
20
RS(Ohms)2
@IF(Max)
2.5
4.0
0.6
50
10
2.0
1.8
IF(mA)
5
100
10
TL(nS)3
(Typ)
80
1500
150
Application
Switch
Attenuator
Switch
100
10
2000
5
Attenuator
Limiter
www.MICROSEMI.com
LSP1000
LSP1002
LSP1004
VB(V)
IR=10μA
(Min)
35
100
35
Capacitance (CT) is measured at f = 1 MHz
Series Resistance (RS) is measured at f = 100 MHz
a. The LSP1012 is measured at f = 1GHz
Carrier Lifetime (TL) is measured at IF = 10 mA, IR = 6 mA
TYPICAL PINOUT FOR 454-X PACKAGE STYLE
454-0
454-1
454-2
454-3
454-4
454-5
ELECTRICAL
Copyright  2007
Rev: 2009-09-10
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 2
LSP1000 – LSP1012
ENHANCED PERFORMANCE SURFACE MOUNT
EPSM® PIN Diodes
®
TM
RoHS Compliant
MECHANICAL OPTIONS
www.MICROSEMI.com
EPSM products are available in a broad range of mechanical configurations. The standard package style is the 450
series. This series has several sizes available to accommodate the internal chip configurations. The 450A is the most
common configuration for single diode applications. The 454 series package style is a three terminal configuration
designed to accommodate 2 chip for ‘T” and common anode/cathode designs. With uniform ‘flat-top’ construction, the
450 series of EPSM products are ideally suited for tape and reel / automated assembly.
The 150 series of EPSM products have a ‘glob-top’ construction and are traditionally used in smaller volume
applications.
PACKAGE STYLE 150X
PACKAGE STYE 450X
PACKAGE STYLE 154
PACKAGE STYPE 454
MECHANICAL
Copyright  2007
Rev: 2009-09-10
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 3
Similar pages