MA-COM MASWSS0167 2.5 v gaas spdt switch 0.5 - 3.0 ghz Datasheet

MASWSS0167
2.5 V GaAs SPDT Switch
0.5 - 3.0 GHz
Rev. V2
Features
•
•
•
•
•
•
•
•
Functional Schematic
Low Voltage Operation: 2.5 V
Low Insertion Loss: 0.3 dB at 1 GHz
Isolation: 34 dB @ 2.4 GHz
0.5 micron GaAs PHEMT Process
Lead-Free 1.2 x 1.5 mm 6-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS Compliant* and 260°C Reflow Compatible
Description
M/A-COM’s MASWSS0167 is a GaAs PHEMT
MMIC single pole double throw (SPDT) switch in a
lead-free 1.2 x 1.5 mm 6-lead PQFN package. The
MASWSS0167 is ideally suited for applications
where low control voltage, low insertion loss,
moderate isolation, small size and low cost are required.
Pin Configuration
Pin No.
Pin Name
Description
1
RF1
RF In/Out
2
GND
RF Ground
3
RF2
RF In/Out
4
V2
Control 2
5
RFC
RF Common
6
V1
Control 1
Typical applications are for filter and antenna
switching in wireless LAN systems that connect
separate receive functions to a common antenna, as
well as other handset and general purpose switching
applications.
The MASWSS0167 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and reliability.
Ordering Information1
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power
(0.5 - 3 GHz, 2.5 V Control)
+32 dBm
Part Number
Package
Operating Voltage
+8.5 volts
MASWSS0167TR-3000
3000 piece reel
Operating Temperature
-40°C to +85°C
MASWSS0167SMB
Sample Test Board
Storage Temperature
-65°C to +150°C
1. Reference Application Note M513 for reel size information.
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0167
2.5 V GaAs SPDT Switch
0.5 - 3.0 GHz
Rev. V2
Electrical Specifications: TA = 25°C, VC = 0 V / +2.5 V, Z0 = 50 Ω 4
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss 5
1 GHz
2 GHz
3 GHz
dB
dB
dB
—
—
—
0.30
0.40
0.50
0.50
—
—
Isolation
1 GHz
2 GHz
3 GHz
dB
dB
dB
23
—
—
25
27
24
—
—
—
VSWR
0.5 - 3.0 GHz
Ratio
—
1.1
—
IP3
Two Tone, +10 dBm/tone, 5 MHz Spacing, > 50 MHz
dBm
—
48
—
P1dB
—
dBm
—
28
—
Linear Pout
2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5%
2.5 V
3.0 V
5.0 V
dBm
dBm
dBm
—
—
—
21.0
23.5
28.5
—
—
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
—
30
—
Ton, Toff
50% control to 90% RF, and 50% control to 10% RF
nS
—
35
—
Transients
In Band
mV
—
60
—
Control Current
|VC| = 2.5 V
µA
—
1
5
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 39 pF for 0.5 - 3 GHz.
Truth Table 6
Handling Procedures
V1
V2
RFC - RF1
RFC - RF2
0
1
On
Off
1
0
Off
On
6. 0 = 0 ± 0.2 V, 1 = 2.5 to 5 V
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASWSS0167
2.5 V GaAs SPDT Switch
0.5 - 3.0 GHz
Rev. V2
Typical Performance Curves
Insertion Loss
Isolation
0.8
40
+25°C
-40°C
+85°C
0.6
30
0.4
20
0.2
10
0.0
0.5
1.0
1.5
2.0
2.5
0
0.5
3.0
+25°C
-40°C
+85°C
1.0
Frequency (GHz)
Return Loss
2.0
2.5
3.0
EVM vs. Pout @ 2.5 GHz
0
10
1.5
Frequency (GHz)
10
+25°C
-40°C
+85°C
8
EVM @ 2.5 V
EVM @ 3.0 V
EVM @ 5.0 V
6
20
4
30
2
40
0.5
0
1.0
1.5
2.0
2.5
10
3.0
Frequency (GHz)
15
20
25
30
35
Pout (dBm)
Lead-Free 1.2 x 1.5 mm 6-Lead PQFN†
† Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages