MCC MURB1605CT THRU omponents 21201 Itasca Street Chatsworth !"# $ % !"# MURB1660CT Features • • • • • 16 Amp Super Fast High Current Capability Low Reverse Leakage Low Forward Voltage Drop High Current Capability Super Fast Switching Speed For High Efficiency Recovery Rectifier 50 to 600 Volts D2-PACK Maximum Ratings • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C MCC Catalog Number MURB1605CT MURB1610CT MURB1620CT MURB1640CT MURB1660CT Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V S Maximum RMS Voltage 35V 70V 140V 280V 420V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Forward Voltage Drop Per Element 1605CT-1620 IF(AV) 16 A TA = 100°C IFSM 125A 8.3ms, half sine VF 0.95V 1.30V 1.50V 1640CT 1660CT Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time 1605CT-1620CT 1640CT-1660CT IR TA = 25°C TJ = 100°C 35ns IF=0.5A, IR=1.0A, Irr=0.25A Trr 1 G 50ns B 4 2 3 D C H J IFM = 8 A per element; TA = 25°C* 5.0µA 500uA V A E K DIMENSIONS DIM A B C D E G H J K S V INCHES MIN MAX .340 .380 .380 .405 .160 .190 .020 .035 .045 .055 .100 BSC .080 .110 .018 .025 .090 .110 .575 .625 .045 .055 *Pulse Test: Pulse Width 300µsec, Duty Cycle 1% www.mccsemi.com MM MIN 8.64 9.65 4.06 .051 1.14 2.54 2.03 0.46 2.29 14.60 1.14 MAX 9.65 10.29 4.83 0.89 1.40 BSC 2.79 0.64 2.79 15.88 1.40 NOTE MCC MBRB1605CT thru MBRB1660CT Figure 1 Typical Forward Characteristics Figure 1 Typical Forward Characteristics 20 Figure 2 Forward Derating Curve 10 16 6 4 12 2 25°C 8 1 Amps .6 6 .4 Amps 1605CT - 20CT 4 .2 1 40CT - 60CT 2 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 70 90 110 130 150 °C .02 Average Forward Rectified Current - Amperesversus Ambient Temperature - °C .01 .4 .6 .8 1.0 1.4 1.2 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 Junction Capacitance - pFversus Reverse Voltage - Volts www.mccsemi.com 1000 MCC MURB1605CT thru MURB1660CT Figure 4 Typical Reverse Characteristics 100 Figure 5 Maximum Non-Repetitive Forward Surge Current 60 40 20 150 TA=150°C 125 10 100 6 75 4 Amps 2 TA=100°C 50 25 µAmps 1 .6 0 .4 1 4 2 6 8 10 20 40 00 60 80 100 Cycles .2 .1 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles TA=25°C .06 .04 .02 .01 20 40 60 80 100 120 140 Volts Instantaneous Reverse Leakage Current - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts Figure 6 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 Pulse Generator Note 2 25Vdc 1Ω Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm www.mccsemi.com