Merrimac IAM-01-75 Broadband active isolator Datasheet

IAM-01 Series
BROADBAND ACTIVE ISOLATORS
10 to 500 MHz / Meets MIL-E-5400R Class 2 Environmental Requirements / SMA Connectors
PRINCIPAL SPECIFICATIONS
GENERAL SPECIFICATIONS
Model
Number
Frequency
Limits, MHz
DC Supply
Power, Nom.
IAM-01-75
IAM-01-200
IAM-01-250
10 - 150
10 - 400
10 - 500
+28V @ 75 mA
+28V @ 75 mA
+15V @ 75 mA
Package Outline
Reverse Isolation:
10 - 100 MHz
40 dB min.
100 - 300 MHz
30 dB min.
300 - 500 MHz
23 dB min.
Impedance:
50 Ω nom.
VSWR:
Input
1.65:1 max.
Output
1.50:1 max.
Insertion Loss/Gain :
0 ± 1 dB (mid-band)
Flatness:
± 1 dB
Power Input, 1 dB Comp: +15 dBm min.
Input Intercept Points:
3rd Order:
+26 dBm typ.
2nd Order:
+30 dBm typ.
DC Supply Connections:
Terminal:
Solder Pin
Ground:
Solder Lug
Weight, nominal:
3 oz. (86 g)
Operating Temp:
-- 55° to +71°C
Typical Performance of Model IAM-01-200
NOTES:
1. Tolerance on 3 place decimals ± .020(.51) except as noted.
2. Dimensions in inches over millimeters.
General Notes:
1. Merrimac’s IAM series consists of broadband, nontuned, nonreciprocal
networks realized in solid state devices. They are intended for applications from
HF through UHF and are ideally suited for isolating signal sources from
mismatched or ‘‘swinging’’ loads.
2. Versions to cover specific frequencies with higher isolation or tighter tolerances
are available as options.
13Mar96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531
Similar pages