Hirose HR31-5.08P-5SDL Interface connectors for factory automation network Datasheet

Interface Connectors for Factory Automation Network
HR31 Series
Complies with Device Net requirements
Comparison of plug heights (actual size)
10.2
●Hirose HR31
15
●Other manufacturer’s product
■ Features
1. Device-Net Compliant
Conforms to requirements of Factory Automation Network Device-Net standards.
Hirose products are distinct from products of made others, as described below.
Feature
Made by others
Hirose HR31
Reduced number of termination
operations
Crimped to commercially available cap connectors,
inserted into housing and fastened by screw.
Crimped and connected to terminal then fastened
simply by inserting into housing.
High density mounting
Plug height : 15 mm
Plug height is 10.2 mm, allowing use of less space
when mounting several connectors
Prevention of connection errors
Contact positions not identified.
Permanently identified contact positions
Number of required operations to
secure receptacle assembly to the
board
Connectors are attached by screws from the
opposite side.
No need for screws, built-in locking pin secures
connector to the board
2 Locking features
Total space occupied by mated assemblies
The connectors can be supplied with either of the following
locking features:
-Screw lock, using attached screws.
-Snap lock, using built-in feature with a definite click-sensation.
With screw lock
12
27
3 4
27.4
10.2
27
3 4
20
5
20
5
10.2
When fully inserted, the plug contacts are fully protected by
the walls of the insulator body eliminating a risk of
accidental damage.
35.5
4. Prevention of deformation of the contacts
12
Without screw lock
1 2
Use crimp tools conforming to JIS C 9711 standards.
Terminated contacts can be removed using 1 mm dia.
steel pin. and re-inserted.
1 2
3. Commercially available tools may be used
■ Applications
Power units and communications units of factory automation
related devices
2004.7
1
■ Product Specifications
12A (2.5mm2 wire)
10A (1.5mm2 wire)
250V AC, 350V DC
Current rating
Rating
Voltage rating
Item
Operating temperature range
-40ç to +100ç
Storage temperature range
-40ç to +85ç (Note 2)
Specification
Conditions
1.Contact resistance
5 m ohms max.
1A DC
2.Insulation resistance
1000 M ohms min.
500 V DC
3.Withstanding voltage
No flashover or insulation breakdown
2000V AC/one minute
4.Impulse withstanding voltage
No flashover or insulation breakdown
Standard waveform of 4KV, positive/negative, 3 times each
5.Vibration
No electrical discontinuity of 10 µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min.
in each of the 3 directions, 10 cycles each
6.Durability
(insertion/ withdrawal)
Contact resistance: 10 m ohms max.
100 cycles
(1000 cycles for gold plated contacts)
7.Temperature cycle
Insulation resistance: 1000 M ohms min.
8.Humidity
Insulation resistance:
10 M ohms min. (Humidity state)
100 M ohms min. (Dry state)
Temperature: -40ç / Room temperature to +100ç / Room temperature
Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes)
5 cycles
96 hours at temperature of 40ç and humidity of 90% to 95%
■ Materials
Part
Plug
Crimp contact
Material
Finish
Remarks
Insulator
PBT
Color: Black or Green
Screw
Steel
Nickel plating
Socket contact
Contact area: phosphor bronze
Termination area: copper
Contact area: tin plating
Termination area: tin plating
Available with gold plating on
contact area
Insulator
PBT
Color: Black or Green
UL94V-0
Male contact
Brass
Contact area: tin plating
Termination are: tin plating
Available with gold plating on
contact area
Nut
Steel
Nickel plating
Board retention pin
Phosphor bronze
Tin plating
Receptacle
UL94V-0
■ Ordering information
●Connector
HR31 - 5.08 P A - 5 S C (01)
1
1 Series name
2 Contact pitch
3 Connector type
4 Screw lock type
5 No. of contacts
2
3
4
5
6
7
8
6 Contact type
S: Female contact
P: Male contact
7 Terminal type
C: Crimping
DL: Right angle through hole type
D: Straight through hole type
8 Color, plating, board retention pin type
HR31
5.08mm
P: Plug
R: Receptacle
Blank: With screw
A: Without screw
5
●Crimp contact
HR31 - SC - 1 1 3 (01)
9
9
10
11
12
2
10
11
12
Series name
HR31
Contact type
SC: female contact
Contact packaging type 1: loose contact
Conductor cross area
1: 1.04 to 2.63mm2
2: 0.25 to 1.65mm2
13
14
13 Plating type
3: Tin plating
1: Gold plating
14 Suffix
■ Plug (with screw lock)
27
8.3
28.3
1 2 3 4 5
10.2
25.4
35.5
HR31-5.08P-5SC
CL No.
Color
Weight
131-0002-2-71
HR31-5.08P-5SC(72)
131-0002-2-72
Black
8g
Plug (without screw lock)
Green
27
2
3
4
5
8.3
28.3
1
Part No.
HR31-5.08P-5SC(71)
10.2
25.4
HR31-5.08PA-5SC
CL No.
Part No.
HR31-5.08PA-5SC
131-0009-1
HR31-5.08PA-5SC(01)
131-0009-1-01
■ Crimp contact
Color
Weight
Black
6g
B
Green
B-B
2.35
ØA
23
B
Part No.
CL No.
ØA
HR31-SC-113(71)
131-0006-3-71
4
131-0007-6-72
3.3
131-0004-8-71
4
131-0005-0-72
3.3
HR31-SC-123(72)
HR31-SC-111(71)
HR31-SC-121(72)
Weight
Contact plating
Tin
1g
Gold
Applicable conductor cross area (Note 2)
1.04 to 2.63mm2
0.2 to 1.65mm2
1.04 to 2.63mm2
0.2 to 1.65mm2
Note 1: Bag packaging (100 pieces/bag)
Note 2: For a multi-strand conductors
3
■ Receptacle (Right angle through hole type with screw lock)
Contact plating
8.6
35.5
1
2
3
4
12
5
3.3
3
7.5
10
HR31-5.08R-5PDL
Part No.
CL No.
HR31-5.08R-5PDL(71)
Weight
Color
Contact plating
131-0001-0-71
Tin
HR31-5.08R-5PDL(72)
131-0001-0-72
Gold
HR31-5.08R-5PDL(73)
131-0001-0-73
HR31-5.08R-5PDL(74)
131-0001-0-74
HR31-5.08R-5PDL(75)
131-0001-0-75
HR31-5.08R-5PDL(76)
131-0001-0-76
Black
Board retention pin
With
Tin
4g
Without
Gold
Green
With
Without
Receptacle (Right angle through hole type without screw lock)
Contact plating
27.4
2
3
4
5
3
8.6
1
12
10
3.3
HR31-5.08RA-5PDL
10.25
Part No.
CL No.
HR31-5.08RA-5PDL(71)
131-0008-9-71
Weight
Color
Contact plating
Tin
HR31-5.08RA-5PDL(72)
131-0008-9-72
Gold
HR31-5.08RA-5PDL(73)
131-0008-9-73
HR31-5.08RA-5PDL(74)
131-0008-9-74
HR31-5.08RA-5PDL(75)
131-0008-9-75
HR31-5.08RA-5PDL(76)
131-0008-9-76
Black
Board retention pin
With
Tin
2g
Without
Gold
Green
With
Without
BPCB mounting pattern
le)
h ho
roug
(Th
te)
h
(No .3 +00.1 (T
2
2-Ø
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
15.24±0.05
ole)
hh
roug
(N
)
ote .3
Ø2
2-
.1
+0
0
(T
u
hro
gh
ho
.1
+0
0
le)
ugh
e)
hol
ro
(Th
6
Ø1.
5-
10±0.05
+0.1
0
10 ±0.05
1.6
5-Ø
● Without screw lock
10.25±0.05
7.5±0.05
● With screw lock
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
15.24±0.05
Connector mounting side
(Board thickness =1.6)
12.6±0.05 12.6±0.05
Connector mounting side
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
4
■ Receptacle (Straight through hole type with screw lock)
35.5
2
3
4
5
3.8
8.6
1
3
4.3
12
Connector mounting side B
HR31-5.08R-5PD
Part No.
CL No.
Weight
Color
Contact plating
HR31-5.08R-5PD(71)
131-0003-5-71
Tin
HR31-5.08R-5PD(72)
131-0003-5-72
Gold
HR31-5.08R-5PD(73)
131-0003-5-73
HR31-5.08R-5PD(74)
131-0003-5-74
HR31-5.08R-5PD(75)
131-0003-5-75
HR31-5.08R-5PD(76)
131-0003-5-76
Black
Board retention pin
With
Tin
4g
Without
Gold
Green
With
Without
Receptacle (Straight through hole type without screw lock)
27.4
8.6
1
2
3
4
5
3
Connector mounting side B
HR31-5.08RA-5PD
Part No.
CL No.
Weight
Color
12
4.3
Contact plating
HR31-5.08RA-5PD(71)
131-0016-7-71
Tin
HR31-5.08RA-5PD(72)
131-0016-7-72
Gold
HR31-5.08RA-5PD(73)
131-0016-7-73
HR31-5.08RA-5PD(74)
131-0016-7-74
HR31-5.08RA-5PD(75)
131-0016-7-75
HR31-5.08RA-5PD(76)
131-0016-7-76
Black
Board retention pin
With
Tin
2g
Without
Gold
Green
With
Without
BPCB mounting pattern
● With screw lock
● Without screw lock
ho
hole
hr
te)
(No 3+00.1 (T
Ø2.
2
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
15.24±0.05
)
h
oug
15.24±0.05
5±0.05
5-
6
Ø1.
gh
rou
(Th
3.8±0.05
3.8±0.05
.1
+0
0
le)
(N
) .1
ote .3+00
Ø2
2-
(Th
g
rou
hh
ole
.1
+00
(T
u
hro
gh
ho
le)
.6
Ø1
5-
5.08±0.05
5.08±0.05
10.16±0.05
10.16±0.05
12.6±0.05 12.6±0.05
Connector mounting side B
(Board thickness =1.6)
)
Connector mounting side B
(Board thickness =1.6)
Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin.
5
■ Tools
Type
Part No.
CL No.
Manual crimp tool
HR31-TC-01
150-0217-7
Contact removal pin
HR31-SC-TP
150-0215-1
Manual crimp tool
Contact removal pin
● Tools application procedures
1. Manual contact crimp tool
The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on
the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip
length is 5mm.
Crimp position indicator
Applicable crimp contact
2
HR31-SC-113 or HR31-SC-111
1.25
HR31-SC-123 or HR31-SC-121
2
1.25
Crimp position indicator
2. Contact removal pin
Contact removal pin provides easy method of contact removal from plug assembly.
1) Fully insert the long end of the contact removal pin into the opening in the insulator.
2) Move the pin forward, in the direction of the mating face.
This will cause the terminated contact to move in opposite direction.
3) Pull out the wire with the attached crimped contact.
Molded-in lance
Molded-in lance
Wire
Wire
Pull-out
Insertion direction
Contact removal pin
6
Contact removal pin
B Usage Precautions
1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to
excess loads.
1.1 Recommended mounting panel dimensions (right angle through hole type)
Panel
Part No.
A
HR31-5.08R-5PDL
36 +0.2
+0
HR31-5.08RA-5PDL
27.9 +0.2
+0
A
5 min.
+0.2
16.6 ±0.1
3.2 0
+0.2
+0.2
11 0
7.8 +0.2
0
2 0
Board
1.2 Recommended mounting panel dimensions (straight through hole type)
Panel
5 min.
3.2
B
Part No.
B
16.6 ±0.1
HR31-5.08R-5PD
36 +0.2
+0
HR31-5.08RA-5PD
27.9 +0.2
+0
11+0.2
0
0.2+0.2
0
7.8
+0.2
0
2 +0.2
0
2. Insert the crimp contact into the plug in the direction shown below.
Crimp contact
Wire
3. Use a number 0 cross drive bit to tighten the screw lock’s screw.
4. Assure that the circuit’s power is off when mating and un-mating connectors.
7
NOTES :
USA:
HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958
Fax : 1 805 522 3217
http://www.hiroseusa.com
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Beechavenue 46.1119PV
Schiphol-Rijk
Phone : 31 20 6557460
Fax : 31 20 6557469
http://www.hiroseeurope.com
UNITED KINGDOM:
KOREA:
HIROSE ELECTRIC UK LTD.
HIROSE KOREA CO., LTD.
Crownhill Business Centre 22 Vincent Avenue (#2NA311,Shihwa Industrial Complex),
Crownhill, Milton Keynes MK8 OAB
1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do
Phone : 44 1908 305400
Phone : 82 31 496 7000,7124
Fax : 44 1908 305401
Fax : 82 31 496 7100
http://www.hirose.co.uk
http://www.hirose.co.kr
CHINA:
HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.
3705,Bund Center,222 Yan An Road(E),Shanghai 20002
Phone : 86 21 6335 2538
Fax : 86 21 6335 0767
HONG KONG:
HIROSE ELECTRIC CO., LTD.
Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha
Tsui East, Kowloon
Phone : 852 2803 5338
Fax : 852 2591 6560
SINGAPORE:
HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza 079903
Phone : 65 6324 6113
Fax : 65 6324 6123
®
8
GERMANY:
HIROSE ELECTRIC GmbH
Zeppelinstrasse 42 D-73760 Ostfildern Kemnat
Phone : 49 711 4560021
Fax : 49 711 4560729
http://www.hirose.de
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei
Phone : 886 2 2557 7351,7352
Fax : 886 2 2552 9851
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
Similar pages