Fairchild FQD19N10TF D-pak tape and reel data d-pak packaging configuration: figure 1.0 Datasheet

D-PAK Tape and Reel Data
D-PAK Packaging
Configuration: Figure 1.0
Packaging Description:
3 Reels per box
FG1N60
XFD
115
FG1N60
XFD
115
FG1N60
XFD
115
TF/X
FG1N60
XFD
115
TM/XM
FG1N60
XFD
115
FKS Label
FG1N60
XFD
115
Static Dissipative
Embossed Carrier Tape
FG1N60
XFD
115
Antistatic Cover Tape
FG1N60
XFD
115
D-PAK parts are shipped in tape. The carrier tape is made
from a dissipative (carbon filled) polycarbonate resin. The
cover tape is a multilayer film (Heat Activated Adhesive in
nature) primarily composed of polyester film, adhesive
layer, sealant, and anti-static sprayed agent. These reeled
parts in standard option are shipped with 2500(TM) /
2000(TF) units per 13” or 330cm diameter reel. The reels
are dark blue or black in color and is made of polystyrene
plastic (anti-static coated). This and some other options
are further described in the Packaging Information
table.These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains three reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
D-PAK Unit Orientation
D-PAK Packaging Information
Standard
( TF / X )
TNR
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
2,000
2,500
13” Dia
13” Dia
339x352x68
339x352x68
6,000
7,500
Reel Size
Inner Box Dimension (mm)
Standard
( TM / XM )
TNR
Max qty per Box
FKS Label
Outer Box Dimension (mm) 390x370x310 390x370x310
Max qty per Box
24,000
30,000
Weight per unit (gm)
0.2986
0.2986
Weight per Reel(kg)
-
-
339mm x 352mm x 68mm
Inner box(6,000cap)
Note/Comments
Inner Box Barcode Label Sample
LOT:
AR
QTY:
PART ID:
SPEC:
D/C1:0211
D/C2:
QTY1:
QTY2:
Outer Box Barcode Label Sample
2002/ 03 /17
07:30:00
BG:SA
SPEC REV:
CPN:
FAIRCHILD SEMICONDUCTOR CORPORATION.
2002/ 03 /17
07:30:00
BG:FKS-IT
PART ID :
LOT NO :
QTY
:
0138
(F63TNR)3.2
M110020004
FAIRCHILD SEMICONDUCTOR CORPORATION.
(BBX)1.0
FKS Label
390mm x 370mm x 310mm
Outer box(24,000cap)
D-PAK Tape Leader and Trailer
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Trailer Tape
360mm minimum or
45 empty pockets
©2003 Fairchild Semiconductor Corporation
Components
Leader Tape
1520mm minimum or
190 empty pockets
September 2003, Rev. C1
D-PAK Tape and Reel Data, continued
D-PAK Embossed Carrier Tape
Configuration: Figure 3.0
P0
D0
T
E1
F
K0
Wc
W
E2
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
Pkg type
A0
B0
W
D0
D1
E1
E2
F
P1
P0
K0
T
Wc
Tc
1.7
+/-0.10
1.75
+/-0.10
14.25
min
7.50
+/-0.10
8.0
+/-0.1
4.0
+/-0.1
2.65
+/-0.10
0.30
+/-0.05
13.3
+/-0.1
0.10
max
1.7
+/-0.10
1.75
+/-0.10
14.25
min
7.50
+/-0.10
12.0
+/-0.1
4.0
+/-0.1
2.70
+/-0.10
0.30
+/-0.05
13.3
+/-0.1
0.10
max
D-PAK TM / XM
(16mm)
7.10
+/-0.10
10.50
+/-0.10
16.0
+/-0.3
1.50
+0.10
/-0.00
D-PAK TF / X
(16mm)
10.80
+/-0.10
7.20
+/-0.10
16.0
+/-0.3
1.50
+0.10
/-0.00
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
10 deg maximum
0.8mm
maximum
1.7mm
maximum
Typical
component
cavity
center line
B0
0.9mm
maximum
1.4mm
maximum
10 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch B (Top View)
TM Type
Sketch C (Top View)
TF Type
Sketch C (Top View)
Component lateral movement
Component lateral movement
Component Rotation
D-PAK Reel
Configuration: Figure 4.0
W1 Measured at Hub
B Min
Dim C
Dim A
max
Dim D
min
Dim N
DETAIL AA
See detail AA
W3
13” Diameter Option
W2 max Measured at Hub
Dimensions are in inches and millimeters
Tape Size
16mm
Reel
Option
13?Dia
Dim A
Dim B
13.00
330
0.059
1.5
Dim C
0.512 +0.020/-0.008
13 +0.5/-0.2
Dim D
0.795
20.2
Dim N
4.00
100
Dim W1
0.646 +0.078/-0.000
16.4 +2/0
Dim W2
0.882
22.4
Dim W3 (LSL-USL)
0.626 ? 0.764
15.9 ? 19.4
September 2003, Rev. C1
Similar pages