Kersemi MUR130RL Ultrafast rectifiers 1.0 a, 50 v â 600 v Datasheet

MUR120 Series
Power Rectifiers
MUR105, MUR110, MUR115, MUR120,
MUR130, MUR140, MUR160
http://www.kersemi.com
The MUR120 series of SWITCHMODE power rectifiers are
designed for use in switching power supplies, inverters and as free
wheeling diodes.
Features
•
•
•
•
•
•
•
ULTRAFAST RECTIFIERS
1.0 A, 50 V − 600 V
Ultrafast 25, 50 and 75 Nanosecond Recovery Times
175°C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
Reverse Voltage to 600 V
Pb−Free Packages are Available*
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
•
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
Shipped in plastic bags, 1000 per bag
Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to
the part number
Polarity: Cathode Indicated by Polarity Band
AXIAL LEAD
CASE 59−10
PLASTIC
MARKING DIAGRAM
AMUR
1xx
AYYW
MUR
1xx
A
YY
W
= Device Code
= Specific Device Code
= Assembly Location
= Year
= Work Week
1
MUR120/D
MUR120 Series
MAXIMUM RATINGS
MUR
Symbol
105
110
115
120
130
140
160
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50
100
150
200
300
400
600
V
Average Rectified Forward Current
(Square Wave Mounting Method #3 Per Note 1)
IF(AV)
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions, halfwave,
single phase, 60 Hz)
IFSM
35
A
TJ, Tstg
65 to +175
°C
Rating
Operating Junction Temperature and
Storage Temperature
1.0 @ TA = 130°C
1.0 @ TA = 120°C
A
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction−to−Ambient
RJA
°C/W
Note 1
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 1.0 Amp, TJ = 150°C)
(iF = 1.0 Amp, TJ = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TJ = 150°C)
(Rated DC Voltage, TJ = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/s)
(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)
trr
Maximum Forward Recovery Time
(IF = 1.0 A, di/dt = 100 A/s, IREC to 1.0 V)
tfr
V
0.710
0.875
1.05
1.25
50
2.0
150
5.0
35
25
75
50
25
50
A
ns
1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
ORDERING INFORMATION
Device
Shipping†
Marking
Package
MUR105
MUR105
Axial Lead
1000 Units/Bag
MUR105RL
MUR105
Axial Lead
5000 Units/Tape & Reel
MUR110
MUR110
Axial Lead
1000 Units/Bag
MUR110RL
MUR110
Axial Lead
5000 Units/Tape & Reel
MUR115
MUR115
Axial Lead
1000 Units/Bag
MUR115RL
MUR115
Axial Lead
5000 Units/Tape & Reel
MUR120
MUR120
Axial Lead
1000 Units/Bag
MUR120RL
MUR120
Axial Lead
5000 Units/Tape & Reel
MUR120RLG
MUR120
Axial Lead
(Pb−Free)
5000 Units/Tape & Reel
MUR130
MUR130
Axial Lead
1000 Units/Bag
MUR130RL
MUR130
Axial Lead
5000 Units/Tape & Reel
MUR140
MUR140
Axial Lead
1000 Units/Bag
MUR140RL
MUR140
Axial Lead
5000 Units/Tape & Reel
MUR160
MUR160
Axial Lead
1000 Units/Bag
MUR160RL
MUR160
Axial Lead
5000 Units/Tape & Reel
MUR160RLG
MUR160
Axial Lead
(Pb−Free)
5000 Units/Tape & Reel
http://www.kersemi.com
2
ns
MUR120 Series
MUR105, MUR110, MUR115, MUR120
100
10
TJ = 175°C
IR, REVERSE CURRENT ( A)
7.0
5.0
3.0
100°C
25°C
1.0
100°C
0.1
0.01
25°C
1.0
0.001
0.7
0
40
20
0.5
60
100
80
120
140
160
180 200
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current*
0.3
* The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these same curves if VR is sufficiently below
rated VR.
0.2
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
TJ = 175°C
2.0
10
0.1
0.07
0.05
0.03
0.02
0.01
0.3 0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
5.0
4.0
RATED VR
RJA = 50°C/W
3.0
dc
2.0
SQUARE WAVE
1.0
0
0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
50
100
150
200
250
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Typical Forward Voltage
50
5.0
TJ = 175°C
4.0
I
(CAPACITIVELOAD) PK 20
I
AV
TJ = 25°C
10
30
C, CAPACITANCE (pF)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
Figure 3. Current Derating
(Mounting Method #3 Per Note 1)
5.0
3.0
2.0
dc
20
10
1.0
7.0
SQUARE WAVE
5.0
0
0
0.5
1.0
1.5
2.0
2.5
0
10
20
30
40
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. Power Dissipation
Figure 5. Typical Capacitance
http://www.kersemi.com
3
50
MUR120 Series
MUR130, MUR140, MUR160
400
10
100
IR, REVERSE CURRENT ( A)
7.0
5.0
3.0
100°C
25°C
10
4.0
100°C
1.0
0.4
0.1
25°C
0.04
1.0
0.01
0.004
0.7
0
100
200
0.5
300
400
500
600
700
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Reverse Current*
0.3
* The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these same curves if VR is sufficiently below
rated VR.
0.2
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
i , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
TJ = 175°C
2.0
TJ = 175°C
40
0.1
0.07
0.05
0.03
0.02
0.01
0.3 0.5
0.7
0.9
1.1
1.3
1.5
1.7
1.9
2.1
2.3
5.0
4.0
RATED VR
RJA = 50°C/W
3.0
2.0
dc
1.0
SQUARE WAVE
0
0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
50
100
150
200
250
TA, AMBIENT TEMPERATURE (°C)
Figure 6. Typical Forward Voltage
20
5.0
TJ = 175°C
4.0
TJ = 25°C
5.0
3.0
(CAPACITIVE LOAD)
I
I
2.0
C, CAPACITANCE (pF)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
Figure 8. Current Derating
(Mounting Method #3 Per Note 1)
10
PK 20
dc
AV
SQUARE WAVE
1.0
10
7.0
5.0
3.0
2.0
0
0
0.5
1.0
1.5
2.0
2.5
0
10
20
30
40
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 9. Power Dissipation
Figure 10. Typical Capacitance
http://www.kersemi.com
4
50
MUR120 Series
NOTE 1. — AMBIENT MOUNTING DATA
Data shown for thermal resistance junction to
ambient (RJA) for the mountings shown is to be
used as typical guideline values for preliminary
engineering or in case the tie point temperature
cannot be measured.
TYPICAL VALUES FOR RJA IN STILL AIR
Mounting
Method
1
2
RJA
Lead Length, L
1/4
1/2
1/8
52
65
72
67
80
87
Units
°C/W
°C/W
50
°C/W
3
MOUNTING METHOD 1
ÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ
L
L
MOUNTING METHOD 2
ÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉ
L
L
Vector Pin Mounting
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
MOUNTING METHOD 3
L = 3/8 ″
Board Ground Plane
P.C. Board with
1−1/2 ″ X 1−1/2 ″ Copper Surface
http://kersemi.com
5
Similar pages