ETC2 CYT6167CHG 400ma cmos ldo regulator Datasheet

400mA CMOS LDO
Regulator
(Preliminary)
CYT6167
Features
Description
The CYT6167 is an efficient linear voltage
¾
Typical 175mV dropout voltage at 150mA.
regulator. It has extra low dropout voltage. At light
¾
Low Ground current at 65uA. (Typ.)
loads the typical dropout voltage is 15mV, at full
¾
Guaranteed 400mA output over the full
load the typical dropout voltage is 600mV. The
output voltage accuracy is better than 2%.
The CYT6167 has low ground current at 65uA,
so it can help prolong battery life. The CYT6167 is
specially designed for hand-held, battery-powered
devices.
operating temperature range.
¾
Extremely tight load and line regulation.
¾
Low temperature coefficient.
¾
Current and thermal limiting.
¾
No-load stability.
¾ Available in SOT-23-3L and TO-92 Packages.
Applications
¾ CD/DVD-ROM, CD/RW
¾ Wireless LAN card, Keyboard, Mouse
¾ Battery Powered Equipments
¾ PCMCIA Card
Ordering/Marking Information
Package
Ordering Information
3.3V
CYT6167AHN
2.8V
CYT6167BHN
2.5V
CYT6167CHN
1.8V
CYT6167DHN
1.5V
CYT6167EHN
3.0V
CYT6167FHN
3.3V
CYT6167AHG
2.8V
CYT6167BHG
2.5V
CYT6167CHG
1.8V
CYT6167DHG
1.5V
CYT6167EHG
3.0V
CYT6167FHG
Marking Information
CYT6167AHN
YYWW
CYT6167BHN
YYWW
CYT6167CHN
YYWW
CYT6167DHN
YYWW
CYT6167EHN
YYWW
CYT6167FHN
YYWW
CYT6167AHG
YYWW
CYT6167BHG
YYWW
CYT6167CHG
YYWW
CYT6167DHG
YYWW
CYT6167EHG
YYWW
CYT6167FHG
YYWW
YY: year code
WW: week code.
Preliminary and all contents are subject to change without prior notice.
1
400mA CMOS LDO
Regulator
(Preliminary)
CYT6167
Ordering/Marking Information (Continued)
Package
Ordering Information
Marking Information
3.3V
CYT6167ALN
167AN_
2.8V
CYT6167BLN
167BN_
2.5V
CYT6167CLN
167CN_
1.8V
CYT6167DLN
16 7DN_
1.5V
CYT6167ELN
167EN_
next character is marked on top for
3.0V
CYT6167FLN
16 7FN_
2003, and underlined for 2004. The
3.3V
CYT6167ALG
16 7AG_
naming pattern continues with
2.8V
CYT6167BLG
16 7BG_
consecutive characters for later
2.5V
CYT6167CLG
16 7CG_
years.
1.8V
CYT6167DLG
16 7DG_
1.5V
CYT167ELG
3.0V
CYT6167FLG
16 7EG_
Starting with 1, a bar on top of 1 is
for production year 2001, and
underlined 1 is for year 2002.
The
The last character is the week
code. (A-Z:
1-26, a-z: 27-52)
16 7FG_
Preliminary and all contents are subject to change without prior notice.
2
400mA CMOS LDO
Regulator
(Preliminary)
Absolute Maximum Ratings(1)
CYT6167
Operating Ratings(2)
Supply Input Voltage (VIN) ..……...…… -0.7V to +6V
Power Dissipation (PD) ……….. Internally Limited
(3)
Junction Temperature (TJ) …….….... 0°C to +125°C
Supply Input Voltage (VIN) ……...….. +2.8V to +6V
Junction Temperature (TJ) …….….. 0°C to +125°C
Package Thermal Resistance
Lead Temperature (soldering, 5 sec.) …....…. 260°C
160°C/W (TO-92)
Storage Temperature (TS) ……….. -40°C to +150°C
250°C/W (SOT-23-3L)
Electrical Characteristics
VIN = VOUT + 1.0V; CIN = 2.2µF; COUT = 2.2µF; IOUT = 10mA; TJ = 25°C, unless otherwise specified.
Symbol
VOUT
∆VOUT /∆T
∆VOUT / VOUT
∆VOUT / VOUT
VIN - VOUT
TPROTECTION
Parameter
Min
Typ
Max
CYT6167-1.5V
1.470
1.5
1.530
CYT6167-1.8V
1.764
1.8
1.836
Output Voltage
CYT6167-2.5V
2.450
2.5
2.550
Accuracy
CYT6167-2.8V
2.744
2.8
2.856
CYT6167-3.0V
2.940
3.0
3.060
CYT6167-3.3V
3.234
3.3
3.366
--
0.025
--
mV/℃
--
1.0
--
%/V
--
1.0
--
%
IOUT =10mA
--
15
--
IOUT =150mA
--
175
--
IOUT =300mA
--
380
--
IOUT =400mA
--
600
--
Thermal Protection Temperature
--
150
--
℃
Protection Hysterisys
--
20
--
℃
Output Voltage
Temperature Coefficient
Line Regulation
Load Regulation(5
Dropout Voltage(6)
Thermal Protection
Conditions
Note 4
VIN = 4.3V to 6V, IOUT = 10mA
(VOUT = 3.3V)
VIN = 5V, IOUT =10mA to 400mA
(VOUT = 3.3V)
Units
V
mV
PSRR
Ripple Rejection
f =120Hz
--
59
--
dB
IGROUND
Ground Current
IOUT =10mA
--
65
--
uA
ILIMIT
Current Limit
VOUT =0V
--
600
--
mA
Preliminary and all contents are subject to change without prior notice.
3
400mA CMOS LDO
Regulator
(Preliminary)
CYT6167
Note 1: Exceeding the absolute maximum rating may damage the device.
Note 2: The device is not guaranteed to function outside its operating rating.
Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD(MAX) = (TJ(MAX)
- TA)/θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the
regulator will go into thermal shutdown. See Table 1 and the “Thermal Considerations” section for details.
Note 4: Output voltage temperature coefficient is the worst-case voltage change divided by the total temperature range.
Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for
load regulation in the load range from 100µA to 400mA. Changes in output voltage due to heating effects are
covered by the thermal regulation specification.
Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its
nominal value measured at 1V differential.
Typical Application
Preliminary and all contents are subject to change without prior notice.
4
CYT6167
Line Regulation (VOUT = 3.3V)
Load Regulation (VOUT = 3.3V)
(VIN = 4.3V to 6V, IOUT = 10mA)
(VIN = 5V, IOUT = 10mA to 500mA)
3.6000
3.600
3.5000
3.500
3.4000
3.400
VOUT (V)
VOUT (V)
400mA CMOS LDO
Regulator
(Preliminary)
3.3000
3.300
3.200
3.2000
3.100
3.1000
3.000
3.0000
4.2
4.7
5.2
0
5.7
100
200
300
400
500
400
500
IOUT (mA)
VIN (V)
Output Voltage vs Temperature
IQ vs IOUT (VOUT = 3.3V)
(VIN = 5V, IOUT = 10mA)
(VIN = 5V, IOUT = 10mA to 500mA)
160
3.330
140
3.320
120
100
IQ (uA)
VOUT (V)
3.310
3.300
80
60
3.290
40
3.280
20
3.270
0
0
20
40
60
80
100
120
0
100
200
300
IOUT (mA)
Temperature (C)
Transient Response (VOUT = 3.3V)
PSRR (VOUT = 3.3)
(IOUT = 10mA to 40mA)
(VIN = 5V, VPP = 1V)
70
60
PSRR (dB)
50
40
30
20
10
0
100
1000
10000
Frequency (Hz)
Preliminary and all contents are subject to change without prior notice.
5
400mA CMOS LDO
Regulator
(Preliminary)
Application Hints
CYT6167
Thermal Consideration
Like any Low dropout regulator, CYT6167 requires It is important that the thermal limit of the package
external capacitors to ensure stability. The external
should not be exceeded. The CYT6167 has built-in
capacitors must be carefully selected to ensure the
thermal protection. When the thermal limit is
performances.
exceeded, the IC will enter protection, and the VOUT
will be reset to zero. The power dissipation for a
given application can be calculated as follows:
Input Capacitor:
An Input Capacitor of at least 2.2uF is required.
Ceramic or Tantalum can be used. The value can
The Power Dissipation (PD) is
be increased without upper limit.
PD = IOUT * [VIN – VOUT]
Output Capacitor:
The thermal limit of the package is then limited to
An Output Capacitor is required for look stability. It
PD(MAX) = [TJ – TA]/θJA where TJ is the junction
must be located no more than 1cm away from the
temperature, TA is ambient temperature, and θJA is
VOUT pin, and connected directly between VOUT and
around 250°C/W for CYT6167. CYT6167 is designed
GND pins. The minimum value is 2.2uF but once
to enter thermal protection at 150°C. For example, if
again its value can be increased without limit.
TA is 25°C then the max PD is limited to about 0.5W.
In other words, if IOUT(MAX) = 400mA, then [VIN –
VOUT] can not exceed 1.25V.
Preliminary and all contents are subject to change without prior notice.
6
400mA CMOS LDO
Regulator
(Preliminary)
CYT6167
OUTLINE DRAWING SOT-23-3L (SC-59)
C
J
H
B
D
A
E
G
F
K
L
N
DIM
A
B
C
D
E
F
G
H
J
K
L
DIMENSIONS
INCHES
MM
MIN MAX MIN MAX
0.110
0.047
0.083
0.035
0.070
0.018
0.015
0.0005
0.034
0.003
-
0.120
0.055
0.104
0.040
0.080
0.024
0.020
0.004
0.040
0.007
0.027
2.80
1.20
2.10
0.89
1.78
0.45
0.37
0.013
0.887
0.085
-
3.04
1.40
2.64
1.03
2.05
0.60
0.51
0.10
1.02
0.18
0.69
OUTLINE DRAWING TO-92
A
DIMN
B
D
E
G
F
H
K
J
A
B
E
F
G
H
J
K
DIMENSIONS
INCHES
MM
MIN MAX MIN MAX
0.175
0.170
0.500
0.016
0.045
0.095
0.080
0.125
0.205
0.210
0.610
0.021
0.055
0.105
0.105
0.165
4.445
4.318
12.70
0.407
1.143
2.413
2.032
3.175
Preliminary and all contents are subject to change without prior notice.
7
5.207
5.334
15.50
0.533
1.397
2.667
2.667
4.191
Similar pages