H11L1 H11L2 Feature: - - High data rate, 1MHz typ. (NRZ) Microprocessor compatible drive Free from latch up and oscillation throughout voltage and temperature ranges Wide supply voltage capability, compatible with all popular logic systems High Isolation voltage between input and output (Viso = 5300V rms) Logic compatible output sinks 16mA at 0.4V max. Guaranteed on/off threshold hysteresis Current transfer ration (CTR: 50~600% at IF = 5mA, VCE = 5V) (CTR: 40~320% at IF = 10mA, VCE = 5V) Compact Dual-in-Line Package Available packaged in Tube or Tape and reel Conventional black housing package H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Certification & Compliance: Pb free and RoHS Compliant UL approved (E338132) cUL approved (E338132) Schematic: Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 1 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Dimension: (Dot location indicates pin 1) 6-Pin Dip (standard): Wide lead bend (Option W): All Dimensions are in mm Tolerance = +/- 0.1mm Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 2 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER SMD lead bend (Option S): All Dimensions are in mm Tolerance = +/- 0.1mm Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 3 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Absolute Maximum Rating: Rating Symbol Parameter H11L1 H11L2 H11L3 Units TSTG Storage Temperature -55 ~ +150 ºC TOPR Operating Temperature -40 ~ +85 ºC TSOL Lead Solder Temperature 260 ºC PTOT Total Power Dissipation 250 mW IF Continuous Forward Current 60 mA IPF Peak Forward Current (300us pulse, 2% Duty Cycle 1.2 A VR Reverse Voltage 5 V PD Power Dissipation 100 mW VO V45 Allowed Range 0 to 16 V Vcc V 65 Allowed Range 3 to 16 V IO Output Current 50 mA Collector Power Dissipation 150 mW 2 mW/ ºC EMITTER DETECTOR PD Derate above 25 ºC Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 4 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Electrical Characteristic: (T=25 oC) Emitter Symbol Characteristic VF Forward voltage IR Reverse current CJ Capacitance Device H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 Test Condition Range Unit Min Typ Max IF = 10mA - 1.2 1.5 V VR = 3V - - 10 µA V = 0, f = 1KHz - - 100 pF Detector Symbol Characteristic VCC Operation Voltage Range ICC(off) Supply Current ICH Output Current, High Device H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 Test Condition Range Unit Min Typ Max 3 - 15 V 3 mA IF = 0mA, VCC =5v - IF = 0mA, VCC =VO = 15V - - 100 V VI-O = 500VCD 1011 - - Ω Ioff<0.3mA, AC, 60s 5300 Isolation Characteristics RISO Isolation Resistance VISO Isolation Voltage Product: H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Vrms Page 5 of 12 H11L1 Symbol Characteristic Device H11L2 H11L3 Test Condition 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Range Unit Min Typ Max IF = 10mA, VCC = 5V - 1.6 5 mA VCC = 5V, IF = IFON(max), RL = 270Ω - 0.2 0.4 V - 1.2 1.6 mA - - 10 mA - - 5 mA VCC = 5V, RL = 270Ω 0.3 0.75 - mA VCC = 5V, RL = 270Ω 0.5 - 0.9 DC Transfer Characteristic ICC(on) VOL Supply Current Output Voltage .low H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 H11L1 IFON Turn on Threshold Current 1 H11L2 VCC = 5V, RL = 270Ω H11Ll3 IFOFF Turn off Threshold Current Ifon/Ifoo Hysteresis Ratio H11L1 H11L2 H11L3 H11L1 H11L2 H11L3 AC Transfer Characteristic H11L1 VCC = 5V, IF = IFON, H11L2 1.2 4 µS RL = 270Ω H11L3 H11L1 VCC = 5V, IF = IFON, Tr Rise Time H11L2 0.1 µS RL = 270Ω H11L3 H11L1 VCC = 5V, IF = IFON, Toff Turn off Time H11L2 1.2 4 µS RL = 270Ω H11L3 H11L1 VCC = 5V, IF = IFON, Tf Fall Time H11L2 0.1 µS RL = 270Ω H11L3 H11L1 Data Rate H11L2 1 MHz H11L3 1 . Max. IF(on) is the maximum current required to trigger the output. For examples, a 1.6mA maximum trigger current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA Ton Turn on Time Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 6 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Characteristic Curves: Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 7 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Test Circuit for Response Time: Solder Reflow temperature Profile: Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 8 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Solder Profile & Footprint: Recommended Solder Footprint for SMD Leadform Units: mm tolerance: +/- 0.1mm Device Marking: Q = QT-Brightek Corporation XXXX = H11L1, H11L2, or H11L3 Y = Year WW = Week Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 9 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Tape and Reel Packing Specifications: Tape Dimensions: Reel Dimensions: Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 10 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Ordering Information: Part Number H11L1 H11L2 H11L3 Orderable Part Number Options Description Quantity per packing H11L1 None Standard 6 pin 60pcs / Tube H11L1W W Wide lead bend (0.4 inch spacing) 60pcs / Tube H11L1STA S SMD lead form with tape and reel option 1000pcs / Tube H11L2 None Standard 6 pin 60pcs / Tube H11L2W W Wide lead bend (0.4 inch spacing) 60pcs / Tube H11L2STA S SMD lead form with tape and reel option 1000pcs / Tube H11L3 None Standard 6 pin 60pcs / Tube H11L3W W H11L3STA S Product: H11L1 H11L2 H11L3 Wide lead bend (0.4 inch spacing) SMD lead form with tape and reel option Date: April 07, 2011 Version# 1.1 60pcs / Tube 1000pcs / Tube Page 11 of 12 H11L1 H11L2 H11L3 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER Revision History: Description: Initial release of H11L1 H11L2 H11L3 Information updates Revision # 1.0 1.1 Revision Date 4/22/2010 04/07/2011 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK’s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: H11L1 H11L2 H11L3 Date: April 07, 2011 Version# 1.1 Page 12 of 12