Vectron OX-2201-EAE-2580-20M00 Ocxo Datasheet

OX-2201-EAE-2580-20M00
OCXO
Preliminary version: Subject to technical modification.
Nominal frequency (f0)
20 MHz
Frequency stabilities
Parameter
Frequency stability
Operating temp. range
-25 to 25 ppb
-40 ... 85 °C
Value
Condition
-200 to 200 ppb
-5 to 5 ppb
-5 to 5 ppb
<± 1 ppb
<± 30 ppb
<± 100 ppb
<± 1 ppm
@25 °C
static; 3.3 V ±5 %
static; Load ± 5 %
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
Value
Condition
vs. operating temp. range (df/f@25 °C)
Parameter
initial tolerance (df/f0)
vs. supply voltage change (df/f)
vs. load change (df/f)
vs. aging / daily (df/f)
vs. aging / month (df/f)
vs. aging / year (df/f)
vs. aging / 10 years (df/f)
Drift 24h over -40..85°C: <50 ppb peak-peak
RF output
Parameter
Signal
Load
Rise Time
Fall Time
Duty cycle
V Low
V High
Harmonics
LVCMOS
15 pF ±10 %
< 10 ns
< 10 ns
40 / 60 %
x < 0.4 V
x > 2.4 V
<- 30 dBc
@ 10 to 90 %Vout
@ 90 to 10 %Vout
@ 1.65 V
Supply voltage
Parameter
Supply voltage (Vs)
Current consumption steady state
Current consumption during warm up
Value
Condition
3.3 V ± 5 %
< 400 mA
< 900 mA
@ Vsnom & 25 °C
@ Vs
Additional Parameters
Parameter
Typ.
Max.
Condition
Phase Noise
-85
-110
-130
-143
-150
-75
-100
-125
-135
-145
dBc/Hz@1Hz
dBc/Hz@10Hz
dBc/Hz@100Hz
dBc/Hz@1kHz
dBc/Hz@10kHz
Parameter
Warm-up time
Processing & Packing
Value
Condition
< 3 min
handling&processing note
@ 25 °C to final frequency
Additional environmental conditions
Rapid temperature changes
MIL-883-1010 Cond B 1000 cycles -55/125°C
Vibration
MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min
Shock
MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction
Solderability
J_STD_002B Cond A leaded/ Cond. B SMD 245°C (diving Ti me 5 ±0,5sec.)
DipLook with 8h damp pre-treatment: solder wetting >95%
Solvent resistance
MIL-STD-883 Meth 2015 Solv. 1,3,4
ESD
HBM JESD22-A114-A Class 2 10* 2000V
Moisture Sensit.
Level 1 JESD22-A113-B
RoHS compliance
100% ROHS compliant
Vectron International • Product Specifications OX-2201-EAE-2580
www.vectron.com
modified 2011-05-25 by Göhrig, Detlef Index : P2
printed 2011-05-26 • page 1 of 5
OX-2201-EAE-2580-20M00
OCXO
Preliminary version: Subject to technical modification.
Additional environmental conditions
Washable
non-washable device
Absolute Maximum Ratings
Parameter
Supply voltage (Vs)
Operable temperature range
Storage temperature range
Min
-40
-40
Vectron International • Product Specifications OX-2201-EAE-2580
www.vectron.com
Typ
Max
Units
6
85
85
V
°C
°C
modified 2011-05-25 by Göhrig, Detlef Index : P2
Condition
printed 2011-05-26 • page 2 of 5
OX-2201-EAE-2580-20M00
OCXO
Preliminary version: Subject to technical modification.
Enclosure
Type G185C
Height 12.1 mm
all units in mm
Pin Connections
Pin 1: I.C. (=> do not connect)
Pin 2: N.C.
Pin 3: Vs (supply voltage)
Pin 4: RF-Output
Pin 5-6: N.C.
Pin 7: GND (Case)
Marking
OX-2201-EAE-2580
20,000 MHz
* VI AYYWW
* pin-1 marking
Vectron International • Product Specifications OX-2201-EAE-2580
www.vectron.com
modified 2011-05-25 by Göhrig, Detlef Index : P2
printed 2011-05-26 • page 3 of 5
OX-2201-EAE-2580-20M00
OCXO
Preliminary version: Subject to technical modification.
Reflow profile
Profile Feature
Pb-Free Assembly/Sn-Pb Assembly
Average ramp-up rate (TL to Tp)
3°C/second max.
Preheat -Temperature Min (Tsmin)
150°c
-Temperature Min (Tsmax)
200°c
-Time (min to max) (ts)
60-180 seconds
Tsmax to TL - Ramp-up Rate
3°C/second max.
Time maintainted above - Temperature (TL)
217°C
- Time (tL)
60-150 seconds
Peak Temperature (Tp)
max 260°C
Time within 5°C of actual Peak Temperature (tp)
20-40 seconds
Ramp-down Rate
6°C/second max.
Time 25°C to Peak Temperature
8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Additional Information
This SMD oscillator has been designed for pick and place reflow soldering.
SMD oscillators must be on the top side of the PCB during the reflow process.
Vectron International • Product Specifications OX-2201-EAE-2580
www.vectron.com
modified 2011-05-25 by Göhrig, Detlef Index : P2
printed 2011-05-26 • page 4 of 5
OX-2201-EAE-2580-20M00
OCXO
Preliminary version: Subject to technical modification.
Standard shipping method
Tape width W [mm]
Quantity per meter
Quantity per reel
P [mm]
A [mm]
B [mm]
K [mm]
44
35.7
175
28
22.5
25.9
12.8
Notes:
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage,
frequency control voltage, load, temperature (25°C) .
Preliminary version: Subject to technical modification.
Vectron International • Product Specifications OX-2201-EAE-2580
www.vectron.com
modified 2011-05-25 by Göhrig, Detlef Index : P2
printed 2011-05-26 • page 5 of 5
Similar pages