MPS N5101 1xn rj-45 10/100 base-t jack with magnetic module Datasheet

1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
Industries
N5101 SERIES
•
RJ-45 1xN, Tab-Down, 8 pin with internal magnetics
•
Available with and without LEDs
•
Suitable for CAT 5 and 6 Fast Ethernet cable or better
UTP
•
Minimum 1500VRMS isolation per IEEE 802.3 requirement
•
Operating temperature range: 0oC to +70oC
•
RoHS compliant product
ELECTRICAL SPECIFICATION @ 25OC
Turns
Ratio
±2%
Retrun Loss
(dB) Min
MHz
Cross Talk
(dB) Typ
MHz
CMR
(dB) Typ
MHz
60-80
1-100
30-100
-12
-40
-35
-14
-12
-40
-35
-18
-14
-12
-40
-35
-18
-14
-12
-40
-35
RX
Insertion
Loss
0.1-100MHz
(dB) Max
1-30
30-60
1CT:1
-1.1
-18
-14
1CT:1
1CT:1
-1.1
-18
1x6
1CT:1
1CT:1
-1.1
1x8
1CT:1
1CT:1
-1.1
Part
Number
1xN
TX
N5101-2
1x2
1CT:1
N5101-4
1x4
N5101-6
N5101-8
•
Inductance: 350μH Min @ 100KHz, 0.1VRMS with 8mA DC
•
Hipot: 1500VRMS, 1 minute
SCHEMATIC
DIMENSIONS: N5101-2
Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B
Gardena, CA 90248
Tel: 310-325-1043
Fax: 310-325-1044
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015
.XXX : ±0.004
mm: X,X : ±0,38
X,XX : ±0,10
www.mpsind.com
[email protected]
1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
Industries
N5101 SERIES
DIMENSIONS: N5101-4
DIMENSIONS: N5101-6
Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B
Gardena, CA 90248
Tel: 310-325-1043
Fax: 310-325-1044
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015
.XXX : ±0.004
mm: X,X : ±0,38
X,XX : ±0,10
www.mpsind.com
[email protected]
1XN RJ-45 10/100 BASE-T JACK
WITH MAGNETIC MODULE
Industries
N5101 SERIES
DIMENSIONS: N5101-8
Product performance is limited to specified parameters. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B
Gardena, CA 90248
Tel: 310-325-1043
Fax: 310-325-1044
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015
.XXX : ±0.004
mm: X,X : ±0,38
X,XX : ±0,10
www.mpsind.com
[email protected]
Similar pages